A comparative evaluation of sealing ability of a new, self-etching, dual-curable sealer: Hybrid Root SEAL (MetaSEAL)

Comparative Evaluation of the Apical Sealability of AH Plus and RealSeal SE Using 5.25% Sodium Hypochlorite with 17% EDTA and 10% Citric Acid as Irrigants-An In Vitro Study

Background

Apical microleakage is considered to be a common reason for the clinical failure of endodontic therapy. Three dimensional sealing of the root canal is one of the main goals of endodontic treatment and is essential for preventing reinfection of the canal and for preserving the health of the periapical tissues, Recently Epoxy resin sealers have been used because of their reduced solubility apical seal and micro-retention to root dentine.

Aim and Objective

This in vitro study was done to evaluate and compare the apical sealability of AH Plus and RealSeal SE using 5.25% sodium hypochlorite with 17% EDTA and 10% citric acid as irrigants. Materials and methods: 44 single-rooted premolars were selected and the teeth are randomly divided into 4 groups (n=10) and 2 control groups (n=2). The extent of dye penetration, from the apical to the coronal part of the root canal, was assessed using a stereomicroscope at 10x magnification for all groups.One-way ANOVA and Kruskal-Wallis tests were performed to compare statistically significant differences among the groups, using SPSS software version 10.0.

Results

Group IV (Citric acid + RealSeal SE) showed a statistically lower mean microleakage when compared to all other groups.

Conclusion

From, the present study, it was concluded that, RealSeal SE sealer with 10% citric acid as irrigant (group IV) showed better apical sealability followed by RealSeal SE sealer with 17% EDTA as irrigant (group III), when compared to AH Plus groups which showed least sealability.

Efficacy of different irrigation agitation systems in the removal of root canal sealers from artificial standardised grooves

The present study aims to assess the efficacy of different irrigation agitation systems in removing calcium silicate-based sealers from artificial standardised apical grooves. After the root canal instrumentation of 96 teeth, artificial apical grooves were created in half of each root. The samples were divided into two main groups according to the sealer type (AH Plus Jet [APJ] and Sure-Seal Root™ [SSR]) (n = 48). The root halves were then reassembled and divided into four experimental groups based on the final irrigation technique used: Conventional Syringe Irrigation (CSI), Ultrasonic Irrigant Agitation (UIA), Sonic Agitation (SA) and Manual Dynamic Agitation (MDA). The roots were then dissembled to assess the amount of root canal sealer. UIA significantly removed more of SSR sealer than CSI, MDA and SA while there was no statistical difference between CSI, MDA, SA and UIA groups in the APJ group. None of the irrigation agitation systems used had completely removed the APJ and SSR sealers. However, UIA was more effective in removing SSR sealer from the standardised apical groove than were CSI, MDA and SA.

Development of endodontic sealers containing antimicrobial-loaded polymer particles with long-term antibacterial effects

OBJECTIVE

The objective of this study is to prepare new dental resins with a long-lasting antimicrobial activity. Specifically, this study evaluates an approach for controlling infection in root canals using sealers containing polyhydroxyethyl methacrylate trimethylolpropane trimethacrylate (polyHEMA/TMPT) particles loaded with cetylpyridinium chloride (CPC). In addition, the physical properties of sealers containing CPC-loaded polyHEMA/TMPT particles (CLP) are determined.

METHODS

PolyHEMA/TMPT particles with 10 (10%-CLP) and 25wt.% CPC (25%-CLP) with different particle sizes were fabricated and incorporated in HEMA-based sealers. CPC-release profiles were evaluated over 14 days of immersion in water, followed by 14 days of storage and 14 days of water immersion. The antibacterial activity of these sealers against Enterococcus faecalis in dentinal tubules was assessed using a root-canal-infection model. Their sealing abilities were evaluated by fluid filtration and physical properties were tested according to the ISO 6876 standard. The long-term antibacterial activity of the cured sealer containing 25%-CLP (∼21μm particle diameter) was re-assessed after 1 year of storage.

RESULTS

After 28 days of immersion, 25%-CLP exhibited a higher and sustained CPC release unlike 10%-CLP. Residual bacteria in root dentinal tubules were eradicated by obturation with 25%-CLP-containing sealers. The incorporation of 25%-CLP (∼21μm) had no adverse effects on the sealing ability and physical properties of the sealer and resulted in long-term antibacterial activity.

SIGNIFICANCE

The incorporation of CPC-loaded particles in HEMA resins yielded endodontic sealers with long-term bactericidal activity against E. faecalis in root canals. These sealers can potentially be used to prevent recurrent apical periodontitis.

In Vitro Comparison of Efficacy of Neolix and ProTaper Universal Retreatment Rotary Systems in Removal of Gutta-Percha Combined with Two Different Sealers

Statement of the Problem

The complete removal of filling material is an important step to regain access to the entire canal and facilitate the disinfection of the root canal system. Rotary nickel-titanium (NiTi) instruments systems have been proposed as an effective removal technique for root canal retreatment.

Purpose

The aim of this study was to evaluate the efficacy of Neolix rotary system and ProTaper Universal retreatment system in the removal of gutta-percha combined with two different sealers.

Materials and Method

In vivo study, eighty extracted human permanent mandibular premolars were prepared using the ProTaper Universal rotary system to an apical size 30 (F3/0.06). The specimens were randomly divided into 4 groups (n=20) and subsequently filled with lateral condensation of gutta-percha and two sealers: AH-26 and Sure-Seal Root. The teeth were stored for 4 weeks at 37°C and 100% humidity and then retreated by one of the following rotary systems: Neolix or ProTaper Universal retreatment system. Teeth were then grooved and monitored under a stereomicroscope with 8× magnification. The images were transferred to the computer and the amount of filling material that remained on the root canal walls was scored using AutoCAD 2017 version 1.1software. Results were analyzed using one-way analysis of variance test and post hoc Tukey-HSD test (p< 0.05).

Results

The mean percentage of remaining gutta-percha and sealer was significantly higher in apical third in all groups (p< 0.01). Post hoc Tukey test showed that there is significantly higher residual filling material in the group filled with gutta-percha and Sure-Seal Root sealer and retreated by Neoniti rotary system compared with other groups in both coronal and middle third of the canal.

Conclusion

The Neoniti rotary system was as effective as ProTaper Universal retreatment system in retreatment of gutta-percha and AH-26 sealer but was significantly less effective in groups obturated with Sure-Seal Root sealer.

Efficacy of different irrigation regimes on the push-out bond strength of various resin-based sealers at different root levels: An in vitro study

Aim:

This study aims to evaluate and compare the efficacy of various irrigation regimens on push-out bond strength of AH Plus/gutta-percha, Real Seal/Resilon, and MetaSeal/gutta-percha at three different root levels.

Materials and Methods:

Single-rooted mandibular premolars (n = 120) were prepared and divided into four groups (n = 30) based on irrigation regimen used: I: 5.25% sodium hypochlorite (NaOCl)-17% ethylenediaminetetraacetic acid (EDTA); II: 5.25% NaOCl-2.25% Peracetic acid (PAA); III: 5.25% NaOCl-18% 1-hydroxyethylidene-1, 1-bisphosphonate (HEBP) (Etidronic Acid); and IV: Distilled Water. Each group was further divided into three subgroups (n = 10); A: AH Plus/gutta-percha; B: MetaSEAL/gutta-percha; C: RealSeal/Resilon. After obturation, roots were sectioned at 3 levels and push-out tests were performed. One-way ANOVA with post hoc Tukey-honestly significant difference tests were applied to assess the significance among various groups.

Results:

Among irrigants, 2.25% PAA showed significantly lower values when compared with rest of the irrigants. There was no significant difference found among EDTA and HEBP. The push-out bond strength of AH Plus was significantly higher among all sealers. The bond strength values were significantly decreased in apico-coronal direction.

Conclusions:

There was superior efficacy of EDTA and HEBP on the bond strength of AH Plus at apical root level when compared with other irrigants and sealers at various root levels.

A Comparative Evaluation of Sealing Ability of New MTA Based Sealers with Conventional Resin Based Sealer: An In-vitro Study

INTRODUCTION

Root canal obturation is the most important step in the root canal treatment that aims to obtain a complete hermetic seal and to prevent the re-growth of microorganisms in the root canal system. To accomplish this, many endodontic obturation materials and sealers are being used.

AIM

To evaluate and compare the apical microleakage of a resin based sealer; Adseal with Mineral Trioxide Aggregate (MTA) based sealers; Pro root MTA and MTA Fillapex.

MATERIALS AND METHODS

Total 75 extracted human single rooted teeth were taken and decoronated at cemento-enamel junction. The access cavities and biomechanical preparation were performed using endodontic rotary system. The teeth were randomly divided into five groups with n=15; Group I - Gutta-percha and Adseal sealer; Group II - Gutta-percha and MTA Fillapex; Group III- Gutta-percha and Pro root MTA; Group IV- Gutta-percha without sealer (positive control group); Group V- Root canal remained empty (negative control). All the specimens were stored at 37(0)C with 100% humidity for one week. All root surfaces except the apical 2mm were covered with two layers of nail varnish and then immersed in an aqueous solution of 2% methylene blue dye for 72 hours. Roots were longitudinally split using a diamond disk. Linear apical dye penetration was measured under Stereomicroscope at 40X magnification.

STATISTICAL ANALYSIS

The data obtained was subjected to statistical analysis using paried t-test, ANOVA for interclass comparison, with SPSS statistical software (version 20.0).

RESULTS

The intraobserver reliability was found to be insignificant in each of the triplicate study of all the three study samples. MTA Fillapex group showed maxmium apical microleakage followed by Pro root MTA and Adseal sealer.

CONCLUSION

The results concluded that Adseal sealer showed minimal dye penetration followed by Pro root MTA and MTA Fillapex. Thus, concluding that Adseal sealer is better in apical sealing than Pro root MTA and MTA Fillapex.

Evaluation of the responses of MHC class II molecule-expressing cells and macrophages to epoxy resin-based and 4-META-containing, methacrylate resin-based root canal sealers in rat subcutaneous tissue

Major histocompatibility complex (MHC) class II molecule-expressing cells and macrophages play a pivotal role in mediating the host tissue response to biomaterials. This study investigated the responses of these cells to epoxy resin-based and 4-META-containing, methacrylate resin-based endodontic sealers (AH Plus and MetaSEAL respectively) in rat connective tissue. Silicone tubes loaded with one of the sealers or solid silicone rods (control) were subcutaneously implanted in male Wistar rats for three time periods of 7, 14, or 28 days. Tissue specimens were immunoperoxidase-stained for MHC class II molecules and CD68 (a general macrophage marker). Results showed that AH Plus-implanted tissue displayed significantly more MHC class II-positive cells than the control at 14 and 28 days, whereas MetaSEAL-implanted tissue showed significantly more CD68-positive cells than both AH Plus-implanted tissue and the control at all time periods. It was concluded that the epoxy resin-based sealer induced the infiltration of MHC class II molecule-expressing cells, whereas 4-META-containing, methacrylate resin-based sealer elicited macrophage infiltration.

Resilon: a comprehensive literature review

Background and aims. An ideal root canal filling material should completely seal the entire root canal space and block communication between the root canal system and its surrounding tissues; it should also be nontoxic, noncarcinogenic, non-genotoxic, biocompatible, insoluble in tissue fluids and dimensionally stable. Bonding to dentin is a promising property, which can prevent leakage and improve the sealing ability of root canal filling materials. Resilon was developed and rec-ommended initially because the existing rootcanal filling materials did not bond to root canal dentin. Since its introduction in 2004, numerous reports have been published regarding various aspects of this material. The aim of this literature review is to present investigations regarding Resilon's physical and chemical properties and leakage studies. Materials and methods. A review of the literature was performed by using electronic and hand searching methods for Resilon from May 2004 to April 2012. Results. There are many published reports regarding Resilon. The searchshowed that Resilon is composed of a parent polymer, polycaprolactone or Tone, which is a biodegradable aliphatic polyester, with filler particles consisting of bioactive glass, bismuth oxychloride and barium sulfate. It possesses some antibacterial and antifungal properties. It is a promising material for root canal filling. Despite the presence of numerous case reports and case series regarding these applications, there are few designed research studies on clinical applications of this material. Resilon has some drawbacks such as high cost. Conclusion. Resilon seals well and is a biocompatible material. However, more clinical studies are needed to confirm its efficacy compared with other materials.

Comparative Resistance of AH26 and a New Sealer Prototype to a Bacterial Challenge

Objective. This study compared the leakage resistance of a New Sealer Prototype (NSP) with a traditional sealer (AH 26) in Resilon-filled roots subjected to a bacterial challenge. Study Design. 41 roots were instrumented to ISO size 50 apically. Group 1 (n = 20) contained Resilon and AH 26 sealer and roots in group 2 (n = 21) contained Resilon and NSP. Roots were embedded in a dual-chamber model with the upper chamber containing Streptococcus mutans inoculum. Evidence of bacterial penetration was observed for 1 month. Fisher's Test was used to analyze the data. Results. 8 of 20 roots (40%) in the AH 26 group demonstrated leakage whereas 3 of 21 roots (14%) in the NSP group leaked. The difference in leakage rates was not statistically significant (P = 0.053). Conclusion. The traditional sealer (AH 26) demonstrated increased leakage rates compared to the New Sealer Prototype (NSP), but the difference did not reach statistical significance in this study.

The efficacy of ProTaper Universal rotary retreatment instrumentation to remove single gutta-percha cones cemented with several endodontic sealers

AIM

To evaluate residual root filling material following removal of three newly developed root canal sealers used with a matched-taper single-cone root filling technique and to compare the efficacy of ProTaper Universal rotary retreatment instruments with that of a conventional manual technique.

METHODOLOGY

The canals of 120 palatal roots in maxillary molar teeth were instrumented with EndoWave nickel-titanium rotary instruments and filled using Hybrid Root SEAL, EndoSequence BC Sealer, Activ GP system or AH Plus with matched-taper single gutta-percha cones. The root fillings were then removed with ProTaper Universal retreatment rotary instruments or a manual technique. Buccolingual and proximal digital radiographs of the roots were exposed to determine the area of remaining filling material in the coronal, middle and apical thirds. The area percentages of remaining filling material in each third and total canal area were calculated. Data were analysed statistically with Kruskal-Wallis and Mann-Whitney U-tests. The level of significance was set at P<0.05.

RESULTS

Irrespective of the sealer type and retreatment technique, filling material could not be removed completely from the root canals. Significantly, more remaining filling material was observed in the apical third (P<0.05). When comparing the sealers, the only significant difference was detected between AH Plus/manual and Activ GP/manual groups with respect to residual material in the total canal area (P<0.05). There were no significant differences between manual and ProTaper groups.

CONCLUSIONS

When using gross radiographic criteria, the Activ GP was more effectively removed from root canals than AH Plus with hand instrumentation. Hybrid Root SEAL, EndoSequence BC Sealer and AH Plus were removed to a similar extent. ProTaper Universal retreatment instruments were as safe and effective as hand instruments in reaching the working length.

Monoblocks in root canals: a finite elemental stress analysis study

AIM

To investigate using finite element stress analysis (FEA) primary, secondary and tertiary monoblocks created either by adhesive resin sealers or by different adhesive posts and to evaluate the effect of interfaces on stress distribution in incisor models.

METHODOLOGY

Seven maxillary incisor FEA models representing different monoblocks using several materials were created as follows: (a) primary monoblock with Mineral Trioxide Aggregate; (b) secondary monoblock with sealer (MetaSEAL) and Resilon; (c) tertiary monoblock with EndoREZ; (d) primary monoblock with polyethylene fibre post-core (Ribbond); (e) secondary monoblock with glass-fibre post and resin cement; (f) tertiary monoblock with bondable glass-fibre post; (g) tertiary monoblock with silane-coated ceramic post. A 300 N load was applied from the palatal surface of the crown with a 135° angle to the tooth long axis. Materials used in the study were assumed to be homogenous and isotropic except the glass-fibre post; the results are expressed in terms of von Mises criteria.

RESULTS

Maximum stresses were concentrated on force application areas (18-22.1 MPa). The stresses within the models increased with the number of interfaces both for the monoblocks created by the sealers (1.67-8.33 MPa) and for the monoblocks created by post-core systems (1.67-11.7 MPa).

CONCLUSIONS

Stresses within roots increased with an increase in the number of the adhesive interfaces. Creation of a primary monoblock within the root canal either by an endodontic sealer or with an adhesive post-core system can reduce the stresses that occur inside the tooth structure.

Sealing ability of Hybrid Root SEAL (MetaSEAL) in conjunction with different obturation techniques

OBJECTIVE

The objective of this study was to evaluate the apical sealing ability of Hybrid Root SEAL (MetaSEAL) in conjunction with different obturation techniques.

METHODOLOGY

Sixty-eight extracted human mandibular straight single-rooted teeth with mature apices were prepared using a step-back technique and divided into 4 experimental groups (n = 15). An additional 8 teeth were prepared for controls (3 for positive, 3 for negative control, and 2 more for calculating 100% leakage). The experimental groups were obturated with Hybrid Root SEAL (MetaSEAL) using cold lateral condensation, vertical condensation, Thermafil, and Ultrafil techniques. Fluid movement along the filled canals was measured using a fluid filtration method. Measurements were made at 2-minute intervals for 8 minutes. The data were calculated as microL/min and statistically analyzed using 1-way ANOVA and Duncan Test.

RESULTS

Cold lateral and vertical condensation had significantly less fluid movement than the Thermafil and Ultrafil groups. Thermafil group had the highest fluid movement values when compared with the other groups (P < .01).

CONCLUSION

Hybrid Root SEAL (MetaSEAL) had less fluid movement with cold lateral and vertical condensation techniques when compared with Thermafil and Ultrafil techniques.