Oral bacterial cultures in nontraumatic brain abscesses: results of a first-line study

Actinomyces israelii and Fusobacterium nucleatum brain abscess in an immunocompetent patient: case report

Introduction

Brain abscess is the most common focal infectious neurological injury. Until the nineteenth century this condition was fatal, however the development of neuroimaging for early diagnosis, neurosurgery and antibiotic therapy in the twentieth century has led to new therapeutic strategies decreasing mortality from 50 % in the 1970s to less than 10 % nowadays. In this context we report a case of brain abscess with a dental origin.

Case report

A immunocompetent man without any addiction presented to the emergency department with dysarthria and frontal headache at home. The clinical examination was normal. Further investigations revealed a polymicrobial brain abscess as a consequence of an ear, nose or throat (ENT) infection with locoregional extension with a dental starting point involving Actinomyces israelii and Fusobacterium nucleatum . In spite of a rapid diagnosis and a neurosurgical management associated with an optimal treatment by a dual therapy made of ceftriaxone and metronidazole the patient unfortunately died.

Conclusion

This case report shows that despite a low incidence and a good prognosis following the diagnosis, brain abscesses can lead to patient's death. Thereby, when the patient's condition and urgency allow, a thorough dental examination of patients with neurological signs following the recommendations would improve the diagnosis made by the clinician. The use of microbiological documentation, the respect of pre-analytical conditions, the interaction between the laboratory and the clinicians are indispensable for an optimal management of these pathologies.

Brain abscess caused by Parvimonas micra: A rare case report and literature review

Brain abscesses mostly develop due to direct infection caused by a nearby infectious lesion or hematogenous spread and are rarely caused by an odontogenic infection. We report a 47-year-old woman who presented with high fever, disturbed consciousness, headache, and neck pain. Imaging studies revealed a ring-shaped enhanced mass in the left frontal lobe causing a mass effect and midline shift. Magnetic resonance spectroscopy revealed a peak alanine concentration of 1.5 ppm. Supraorbital keyhole surgery with abscess removal was performed, and a bacterial culture confirmed a diagnosis of Parvimonas micra infection. After undergoing 6-week antibiotic treatment, the patient's symptoms resolved completely. No recurrence of abscess was observed during the follow-up period. Although brain abscess caused by P. micra has rarely been reported, an odontogenic origin should be investigated, especially when a patient has a history of periodontal infection or tooth extraction.

Brain Abscess: A Rare Clinical Case with Oral Etiology

Brain abscess is a very rare condition but has a significant mortality rate. The three main routes of inoculation are trauma, contiguous focus, and the hematogenous route. The odontogenic focus is infrequent and is usually a diagnosis of exclusion. This paper presents a brain abscess case proven to be of dental origin, caused by Actinomyces meyeri and Fusobacterium nucleatum. This case highlights the risk underlying untreated dental disease and why oral infectious foci removal and good oral health are essential in primary care.

Nitinol Type Alloys General Characteristics and Applications in Endodontics

A very extensive literature review presents the possibilities and needs of using, in endodontics, the alloys commonly known as nitinol. Nitinol, as the most modern group of engineering materials used to develop root canals, is equilibrium nickel and titanium alloys in terms of the elements’ atomic concentration, or very similar. The main audience of this paper is engineers, tool designers and manufacturers, PhD students, and students of materials and manufacturing engineering but this article can also certainly be used by dentists. The paper aims to present a full material science characterization of the structure and properties of nitinol alloys and to discuss all structural phenomena that determine the performance properties of these alloys, including those applied to manufacture the endodontic tools. The paper presents the selection of these alloys’ chemical composition and processing conditions and their importance in the endodontic treatment of teeth. The results of laboratory studies on the analysis of changes during the sterilization of endodontic instruments made of nitinol alloys are also included. The summary of all the literature analyses is an SWOT analysis of strengths, weaknesses, opportunities, and threats, and is a forecast of the development strategy of this material in a specific application such as endodontics.

Development Strategy of Endodontic Filling Materials Based on Engineering and Medical Approaches

This article is a literature review aimed at presenting the general state of knowledge in manufacturing engineering and materials engineering to develop engineering materials applied for endodontic treatment as filling materials. Particular attention was paid to theoretical analyses concerning the selection of methods for developing and obturating root canals and discussing the results of experimental studies available in the literature. These activities aimed to compare the importance of the most commonly used endodontic filling materials based on gutta-percha or polymeric polyester materials, commonly known as resilon, respectively. The motivation to take up this complex, multi-faceted topic in this paper is the extent of caries, periodontal disease, and other oral diseases in 3 to 5 billion people, often affecting toothlessness and contributing to an increase in the index of disability-adjusted life years (number). Endodontics is an important element of the authors’ concept of Dentistry Sustainable Development (DSD) > 2020. The principles of qualifying patients for endodontic treatment are discussed. The introduction of rotary tools, especially manufactured from Nitinol alloy, to develop root canals and the latest thermohydraulic and condensation techniques for obturation guarantee progress in endodontics. The “Digital Twins” methodology was used, rooted in the idea of Industry 4.0 and the resulting idea of Dentistry 4.0, as well as knowledge management methods, to perform experimental research in virtual space, concerning methods of developing and obturating the root canal and assessing the tightness of fillings. Microscopic visualization methods were also used. Significant factors determining the effectiveness of endodontic obturation are the selection of the filling material and the appropriate obturation method. The generalized dendrological matrix of endodontic filling materials considers the criteria of mechanical strength influencing the potential root fracture and the quality of root canal filling. The results of the SWOT point analysis (strengths and weaknesses, opportunities, threats) were also compared. For both filling materials, the weaknesses are much less than the strengths, while the threats are slightly less than the opportunities for the gutta-percha-based material, while for resilon the opportunities are much smaller than the threats. It requires the application of an appropriate development strategy, i.e., MAXI-MAXI in the case of a filling material based on gutta-percha and MAXI-MINI in the case of resilon. Therefore, the analysis of these experimental data does not indicate the real competitiveness of resilon for the gutta-percha-based material. This material deservedly maintains its strong position as the “Gold Standard of Endodontics”.

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

Is Gutta-Percha Still the “Gold Standard” among Filling Materials in Endodontic Treatment?

The paper is an extensive monographic review of the literature, and also uses the results of the authors’ own experimental research illustrating the noticed developmental tendencies of the filling material based on gutta-percha. The whole body of literature proves the correctness of the research thesis that this material is the best currently that can be used in endodontics. Caries is one of the most common global infectious diseases. Since the dawn of humankind, the consequence of the disease has been the loss of dentition over time through dental extractions. Both tooth caries and tooth loss cause numerous complications and systemic diseases, which have a serious impact on insurance systems and on the well-being, quality, and length of human life. Endodontic treatment, which has been developing since 1836, is an alternative to tooth extraction. Based on an extensive literature review, the methodology of qualifying patients for endodontic treatment was analyzed. The importance of selecting filling material and techniques for the development and obturation of the root canal during endodontic treatment was described. Particular attention was paid to the materials science aspects and the sequence of phase transformations and precipitation processes, as well as the need to ensure the stoichiometric chemical composition of Ni–Ti alloys, and the vacuum metallurgical processes and material processing technologies for the effects of shape memory and superelasticity, which determine the suitability of tools made of this alloy for endodontic purposes. The phenomena accompanying the sterilization of such tools, limiting the relatively small number of times of their use, play an important role. The methods of root canal preparation and obturation methods through cold side condensation and thermoplastic methods, including the most modern of them, the thermo-hydraulic condensation (THC) technique, were analyzed. An important element of the research hypothesis was to prove the assumption that to optimize the technology of development and obturation of root canals, tests of filling effectiveness are identified by the density and size of the gaps between the root canal wall, and the filling methods used and devices appropriate for material research, using mainly microscopy such as light stereoscopic (LSM) and scanning electron (SEM). The most beneficial preparations were obtained by making a longitudinal breakthrough of 48 natural human teeth, extracted for medical reasons, different from caries, with compliance with all ethical principles in this field. The teeth were prepared using various methods and filled with multiple obturation techniques, using a virtual selection of experimental variants. The breakthroughs were made in liquid nitrogen after a one-sided incision with a narrow gap created by a diamond disc using a materialographic cutter. The best effectiveness of the root canal filling was ensured by the technology of preparing the root canals with K3 rotary nitinol tools and filling the teeth with the THC thermoplastic method using the System B and Obtura III devices with studs and pellets of filling material based on gutta-percha after covering the root canal walls with a thin layer of AH Plus sealant. In this way, the research thesis was confirmed.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

The Concept of Sustainable Development of Modern Dentistry

This paper concerns the assessment of the current state of dentistry in the world and the prospects of its sustainable development. A traditional Chinese censer was adopted as the pattern, with a strong and stable support on three legs. The dominant diseases of the oral cavity are caries and periodontal diseases, with the inevitable consequence of toothlessness. From the caries 3.5–5 billion people suffer. Moreover, each of these diseases has a wide influence on the development of systemic complications. The territorial range of these diseases and their significant differentiation in severity in different countries and their impact on disability-adjusted life years index are presented (DALY). Edentulousness has a significant impact on the oral health-related quality of life (OHRQoL). The etiology of these diseases is presented, as well as the preventive and therapeutic strategies undertaken as a result of modifying the Deming circle through the fives’ rules idea. The state of development of Dentistry 4.0 is an element of the current stage of the industrial revolution Industry 4.0 and the great achievements of modern dental engineering. Dental treatment examples from the authors’ own clinical practice are given. The systemic safety of a huge number of dentists in the world is discussed, in place of the passive strategy of using more and more advanced personal protective equipment (PPE), introducing our own strategy for the active prevention of the spread of pathogenic microorganisms, including SARS-CoV-2. The ethical aspects of dentists’ activity towards their own patients and the ethical obligations of the dentist community towards society are discussed in detail. This paper is a polemic arguing against the view presented by a group of eminent specialists in the middle of last year in The Lancet. It is impossible to disagree with these views when it comes to waiting for egalitarianism in dental care, increasing the scope of prevention and eliminating discrimination in this area on the basis of scarcity and poverty. The views on the discrimination of dentistry in relation to other branches of medicine are far more debatable. Therefore, relevant world statistics for other branches of medicine are presented. The authors of this paper do not agree with the thesis that interventional dental treatment can be replaced with properly implemented prophylaxis. The final remarks, therefore, present a discussion of the prospects for the development of dentistry based on three pillars, analogous to the traditional Chinese censer obtaining a stable balance thanks to its three legs. The Dentistry Sustainable Development (DSD) > 2020 model, consisting of Global Dental Prevention (GDP), Advanced Interventionist Dentistry 4.0 (AID 4.0), and Dentistry Safety System (DSS), is presented.

Non-Antagonistic Contradictoriness of the Progress of Advanced Digitized Production with SARS-CoV-2 Virus Transmission in the Area of Dental Engineering

The general goals of advanced digitized production in the Industry 4.0 stage of the industrial revolution were presented along with the extended holistic model of Industry 4.0, introduced by the authors, indicating the importance of material design and the selection of appropriate manufacturing technology. The effect of the global lockdown caused by the SARS-CoV-2 virus transmission pandemic was a drastic decrease in production, resulting in a significant decrease in the gross domestic product GDP in all countries, and gigantic problems in health care, including dentistry. Dentists belong to the highest risk group because the doctor works in the patient’s respiratory tract. This paper presents a breakthrough authors solution, implemented by the active SPEC strategy, and aims to eliminate clinical aerosol at the source by negative pressure aspirating bioaerosol at the patient’s mouth line. The comparative benchmarking analysis and its results show that only the proprietary solution with a set of devices eliminates the threat at the source, while the remaining known methods do not meet the expectations. The details of this solution are described. Photopolymer materials and additive Digital Light Printing (DLP) technology were used.

Parvimonas micra: A potential causative pathogen to consider when diagnosing odontogenic brain abscesses

Background:

Brain abscess is a life-threatening entity which requires prompt and long-term antibiotic therapy, generally associated with surgical drainage, and eradicating the primary source of infection. Parvimonas micra (Pm) has only been reported once before as the lone infecting organism of an orally originated, solitary brain abscess. Diagnosing brain abscesses caused by this Gram-positive anaerobic coccus, constituent of the oral cavity flora, is challenging, and an optimal treatment regimen has not been well established. We report the diagnosis and successful treatment of a Pm caused odontogenic brain abscess.

Case Description:

A 62-year-old immunocompetent male with a right-parietal brain abscess presented with headache and seizures. He was started on empirical antibiotic therapy and subsequently underwent surgical drainage. The only source of infection found was severe periodontitis with infected mandibular cysts. Thus, tooth extraction and cyst curettage were performed 1 week after brain surgery. Cultures of brain abscess fluid were negative, but amplification of bacterial 16S ribosomal RNA (rRNA) with polymerase chain reaction demonstrated Pm. After 3 weeks of intravenous ceftriaxone and metronidazole, the patient was switched to oral metronidazole and moxifloxacin for 6 weeks.

Conclusions:

This case highlights the potential risk of untreated dental infections causing brain abscesses. Pm should be considered as a possible pathogen of odontogenic brain abscesses despite its presence usually not being detected by standard bacterial cultures. Therefore, 16S rRNA gene sequencing analysis is strongly recommended for bacterial identification before defining brain abscesses as cryptogenic.

Multiple brain abscesses after professional tooth cleaning: Case report and literature review

Brain abscess (BA) is an encapsulated infection and can be the consequence of head and cranio-maxillo-facial surgery or trauma, or may be secondary to cavernous thrombophlebitis, but is most frequently due to hematogenous septic dissemination from an adjacent site of infection, such as the paranasal sinuses, middle ear or oral cavity. We report a rare and unfortunate case of multiple BA caused by dental procedures in a young man with undiagnosed patent foramen ovale (PFO). Simple routine dental procedures, such as tooth brushing and professional oral hygiene, can predispose to life-threatening conditions. This case report and literature review highlights that multiple BA after professional tooth cleaning is extremely rare, but cardiac defects (in first place PFO which is a potential source of paradoxical embolism) promote BA formation.

An unusual case of dental infection by Pseudomonas aeruginosa causing a brain abscess: case report

A brain abscess may result when dental infection reaches the brain through contiguous anatomic cavities such as the maxillary sinus, the ethmoid sinus and the orbital cavity. It is an important complication and should be treated aggressively. Such treatment would include the excision of the etiological factor, drainage and adjuvant antibiotic therapy. The present case concerns a 23 year old woman who presented at the General Hospital of Nova Iguaçu with complaints of pain in the right side of the face and was diagnosed with acute sinusitis. Antibiotics and analgesics were prescribed to treat the disease. However, after 10 days, she returned to the emergency room, presenting with proptosis of the right eyeball, subconjunctival haemorrhage, ophthalmoplegia and intense pain in the right orbit, in addition to headaches. After computed tomography was performed, she was diagnosed with a brain abscess in the frontal lobe with the involvement of the maxillary right first molar, the maxillary sinus, the ethmoid sinus and the orbital cavity. With culturing of the secretion, the growth of Pseudomonas aeruginosa colonies was evident. Treatment consisted of a craniotomy to drain the brain abscess, a Caldwell-Luc procedure to drain the right maxillary sinus, dental extraction and aggressive antibiotic therapy. After 6 weeks, the patient was discharged with no neurological sequelae.

Brain Abscess Potentially Resulting from Odontogenic Focus: Report of Three Cases and a Literature Review

INTRODUCTION

Odontogenic foci can rarely cause intracranial infection. Hematogenous spread is considered to be the most important pathophysiological mechanism of intracranial infection of odontogenic origin. To investigate the oral origin of intracranial infections, oral surgeons should understand the underlying mechanisms by which oral bacteria spread to the central nervous system. However, there have been very few reports of intracranial infection resulting from odontogenic infection.

CASE REPORTS

The authors report the cases of a 64-year-old man, a 68-year-old man, and a 64-year-old woman whose brain abscesses perhaps have arisen from odontogenic foci, because other sources of intracranial infection such as endocarditis and maxillary sinusitis were not found. Bacteriological examination of brain abscess specimens identified Staphylococcus aureus in case 1, Streptococcus constellatus, Fusobacterium nucleatum, and Parvimonas micra in case 2, and Lactobacillus catenaformis, Porphyromonas gingivalis, and F. nucleatum in case 3. All suspected causal teeth had no obvious signs of acute inflammation in all three cases.

CONCLUSIONS

Oral surgeons should understand these characteristics of odontogenic brain abscess, in which the potentially causal odontogenic foci often lack acute symptoms. If other origins of infection are not found, it would be better to eliminate the potentially causal odontogenic foci for improvement of oral hygiene, however, the decision making criteria to eliminate suspected causal teeth is needed to be elucidated.

Prevalence and intensity of bacteraemia following orthodontic procedures

BACKGROUND

There is a possibility that bacteria may enter the blood stream during some non-surgical manipulation procedures, which include orthodontic treatment procedures (alginate impression taking, separator placement, band cementation, and archwire change).

OBJECTIVES

The aim of this study was to determine the prevalence and intensity of bacteraemia associated with orthodontic procedures in patients seen at the Lagos University Teaching Hospital, Nigeria.

METHODOLOGY

A total of 100 subjects who presented at the Orthodontic Clinic of the Lagos University Teaching Hospital and who met the inclusion criteria were recruited for the study. Four orthodontic procedures were investigated: alginate impression taking, separator placement, band cementation and archwire placement. Subjects were randomly placed in one of the four procedure groups. Peripheral blood was collected for microbiologic analysis before the orthodontic procedures and within 2 min of completion of the procedures. The BACTEC automated blood culture system and the lysis filtration method of blood culturing were used for microbiological analysis of the blood samples. The Wilcoxon signed rank test, the McNemar χ(2) test, the Mann-Whitney U-test, and Spearman and point bi-serial correlations were used for statistical evaluation at the P<0.05 level.

RESULTS

A significant increase in the prevalence and intensity of bacteraemia was observed following separator placement. The predominant bacteria isolated from the blood cultures were Streptococcus viridans and Staphylococcus species.

CONCLUSION

Separator placement induced the highest levels of bacteraemia. Use of a 0.2% chlorhexidine mouth rinse is recommended prior to separator placement in orthodontic patients.

Bacterial Spine Infections in Adults: Evaluation and Management

Bacterial spinal infections in adults can have notable adverse consequences, including pain, neurologic deficit, spinal instability and/or deformity, or death. Numerous factors can predispose a person to spinal infection, many of which affect the immune status of the patient. These infections are typically caused by direct seeding of the spine, contiguous spread, or hematogenous spread. Infections are generally grouped based on anatomic location; they are broadly categorized as vertebral osteomyelitis, discitis, and epidural abscess. In some cases, the diagnosis may not be elucidated early without a reasonable index of suspicion. Diagnosis is based on history and physical examination, laboratory data, proper imaging, and culture. Most infections can be treated with an appropriate course of antibiotics and bracing if needed. Surgical intervention is usually reserved for infections resistant to medical management, the need for open biopsy/culture, evolving spinal instability or deformity, and neurologic deficit or deterioration.

The oral mucosal and salivary microbial community of Behçet's syndrome and recurrent aphthous stomatitis

Background

Behçet's syndrome (BS) is a multisystem immune-related disease of unknown etiology. Recurrent aphthous stomatitis (RAS) is characterized by the presence of idiopathic oral ulceration without extraoral manifestation. The interplay between the oral microbial communities and the immune response could play an important role in the etiology and pathogenesis of both BS and RAS.

Objective

To investigate the salivary and oral mucosal microbial communities in BS and RAS.

Methods

Purified microbial DNA isolated from saliva samples (54 BS, 25 healthy controls [HC], and 8 RAS) were examined by the human oral microbe identification microarray. Cultivable salivary and oral mucosal microbial communities from ulcer and non-ulcer sites were identified by matrix-assisted laser desorption/ionization time-of-flight analysis. Mycobacterium spp. were detected in saliva and in ulcer and non-ulcer oral mucosal brush biopsies following culture on Lowenstein-Jensen slopes and Mycobacterial Growth Indicator Tubes.

Results

There was increased colonization with Rothia denticariosa of the non-ulcer sites of BS and RAS patients (p<0.05). Ulcer sites in BS were highly colonized with Streptococcus salivarius compared to those of RAS (p<0.05), and with Streptococcus sanguinis compared to HC (p<0.0001). Oral mucosa of HC were more highly colonized with Neisseria and Veillonella compared to all studied groups (p<0.0001).

Conclusions

Despite the uncertainty whether the reported differences in the oral mucosal microbial community of BS and RAS are of causative or reactive nature, it is envisaged that restoring the balance of the oral microbial community of the ulcer sites may be used in the future as a new treatment modality for oral ulceration.

Intracranial bacterial infections of oral origin

Brain abscesses are rare but potentially deadly complications of odontogenic infections. This phenomenon has been described mainly in the form of case reports, as large-scale studies are difficult to perform. We compiled a total of 60 previously published cases of such a complication to investigate the predisposing factors, microbiology, and clinical outcomes of intracranial abscesses of odontogenic origin. A systematic review of the literature using the PubMed database was performed. Men accounted for 82.1% of cases, and the mean age was 42.1 years. Caries with periapical involvement and periodontitis were the two most common intra-oral sources, and wisdom tooth extraction was the most common preceding dental procedure. In 56.4% of cases, there were obvious signs of dental disease prior to development of intracranial infection. Commonly implicated microorganisms included Streptococcus viridans (especially the anginosus group), Actinomyces, Peptostreptococcus, Prevotella, Fusobacterium, Aggregatibacter actinomycetemcomitans and Eikenella corrodens. There was an 8.3% mortality rate. Intracranial abscesses can form anywhere within the brain, and appear unrelated to the side of dental involvement. This suggests that hematogenous spread is the most likely route of dissemination.

Cerebral abscess: a rare complication of flexible bronchoscopy

Infectious complications associated with flexible bronchoscopy are rare and mostly because of inadequate cleaning techniques. Transient bacteremia after flexible bronchoscopy has been observed; however, a clinically significant illness has been reported infrequently. We report the case of a 53-year-old man with poorly controlled diabetes who developed cerebral abscess 28 days after a flexible bronchoscopy was performed to evaluate a pneumonic consolidation of the left upper lobe of the lung. Streptococcus viridians was cultured from the cerebral abscess and the bronchoscopy specimens as well. Asymptomatic bacteremia from bronchoscopic procedures might have caused distant spread. Antibiotic treatment in susceptible patients for bacteremia may prevent serious infectious complications after flexible bronchoscopic procedures for infectious etiology.

A hematogenous spread brain abscess invading the right damaged temporomandibular joint

We report a rare case of a brain abscess which drained spontaneously in a temporomandibular joint damaged by osteoarthritis. The female patient presented to our hospital with a severe headache and pain in the temporomandibular joint. She showed elevated inflammatory parameters with unknown cause. Magnetic resonance imaging of her whole body revealed a large temporal brain abscess extending into the glenoid fossa of the temporomandibular joint. The brain abscess was incised and drained by neurosurgeons in our hospital and in the same operation we resected the articular disc and the affected part of the right temporomandibular joint. Histological examination confirmed a chronic arthrosis in the resected bone of the temporomandibular joint and an inflammatory abscess in the resected brain tissue. The patient recovered well and the inflammation resolved as seen in postoperative investigations. Magnetic resonance imaging a month later confirmed local consolidation in the brain with no sign of residual inflammation.

Microbiological spectrum of brain abscess at a tertiary care hospital in South India: 24-year data and review

Intracranial abscesses are life-threatening infections that pose a diagnostic challenge not only to the neurosurgeon but also to the microbiologists. Detailed studies documenting the spectrum of infecting agents involved in brain abscesses are limited from India. Materials and Methods. This is a retrospective analysis of 352 samples from 1987 to 2010 analyzed at a tertiary care hospital in South India from 1987 to 2010, to document the changing trends with time. Results. The age of the patients ranged from 2 to 80 years, a larger number of males being affected. Otogenic infections were the most common cause while cryptogenic abscesses were 20%. Gram stain and culture positivity were 78% each. Gram-positive and negative facultative aerobes and obligate anaerobes were also on the rise. Unusual organisms, like Burkholderia pseudomallei, Salmonella typhi, Nocardia species, Cladosporium bantiana, Fonsecaea pedrosoi, Entamoeba histolytica, and Acanthamoeba were also isolated and/or detected from the brain abscesses aspirate or resected tissue. Summary. New and emerging pathogens associated with brain abscess, especially in immunosuppressed individuals, have renewed the necessity of an early detection, and it will be of great value in appropriate management of patients with brain abscess.

Do dental infections really cause central nervous system infections?

In the post-World War I antibiotic era, the prevalence of central nervous system (CNS) infections is estimated to be 1 per 100,000 population. The literature is replete with anecdotal case reports of CNS infections of apparent dental etiology. Conversely, it is widely cited that the incidence of CNS infection of dental etiology is only in the range of 1% to 2%. We seek to answer the question if dental infections really cause CNS infections. In this article, we focus on septic cavernous sinus thrombosis and brain abscess and if it is a diagnosis of exclusion or evidence-based.

Spinal epidural abscess: aetiology, predisponent factors and clinical outcomes in a 4-year prospective study

Spinal epidural abscess (SEA) is a rare, but serious, condition with multiple causes. We prospectively studied the aetiology, predisposing factors, and clinical outcomes of SEA in all patients with SEA treated in our hospital's neurosurgical service from 2004 to 2008. For each patient, we recorded the medical history, comorbidities, focus of infection, pathogen(s), and outcome. The 36 patients (19 women and 17 men) ranged in age from 34 to 80 years old (mean 57; median 56). The SEA was primary (i.e., due to haematogenous spread) in 16 patients (44%); it was secondary to elective spinal procedures, either injections or surgery, in 20 patients (56%). The duration of follow-up was 12-60 months (mean 36; median 37.5). The most common pathogen, Staphylococcus aureus, was found in 18 patients (50%). Patients with primary SEA had different underlying diseases and a wider range of pathogens than those with secondary SEA. Only five patients (14%) had no major comorbidity; 16 of the 20 patients with secondary SEA (44% of the overall group) had undergone spinal surgery before developing the SEA; the treatment of the SEA involved multiple surgical operations in all 16 of these patients, and spinal instrumentation in 5 (14%); 22 patients (61% of the overall group) recovered fully.

"Gum bug, leave my heart alone!"--epidemiologic and mechanistic evidence linking periodontal infections and atherosclerosis

Evidence from epidemiologic studies suggests that periodontal infections are independently associated with subclinical and clinical atherosclerotic vascular disease. Although the strength of the reported associations is modest, the consistency of the data across diverse populations and a variety of exposure and outcome variables suggests that the findings are not spurious or attributable only to the effects of confounders. Analysis of limited data from interventional studies suggests that periodontal treatment generally results in favorable effects on subclinical markers of atherosclerosis, although such analysis also indicates considerable heterogeneity in responses. Experimental mechanistic in vitro and in vivo studies have established the plausibility of a link between periodontal infections and atherogenesis, and have identified biological pathways by which these effects may be mediated. However, the utilized models are mostly mono-infections of host cells by a limited number of 'model' periodontal pathogens, and therefore may not adequately portray human periodontitis as a polymicrobial, biofilm-mediated disease. Future research must identify in vivo pathways in humans that may (i) lead to periodontitis-induced atherogenesis, or (ii) result in treatment-induced reduction of atherosclerosis risk. Data from these studies will be essential for determining whether periodontal interventions have a role in the primary or secondary prevention of atherosclerosis.