Resin-based versus gutta-percha-based root canal obturation: influence on bacterial leakage in an in vitro model system

What Are the Chances of Resilon to Dominate the Market Filling Materials for Endodontics?

This paper is a literature review with additional virtual analyses of the authors’ own experimental research results. Knowledge from various areas was synergistically combined, appropriately for concurrent engineering, presenting several possible methodological approaches used in research, optimizing the selection of engineering materials and the conditions of their application with particular application in endodontics. Particular attention was paid to the theoretical aspects of filling material strengths, weaknesses, opportunities, and threats SWOT analysis. Attention was paid to the original concepts of Sustainable Dentistry Development in conjunction with Dentistry 4.0, which includes endodontics as an important element. The dentists’ actions, among others, in conservative dentistry, along with endodontics, requires close cooperation with engineers and the enginering sciences. Methods of root canal preparation were described, together with selected tools, including those made of nitinol. Principles concerning the process of cleaning and shaping the pulp complex are presented. The importance of obturation methods, including the Thermo-Hydraulic-Condensation THC technique, and the selection of filling materials with the necessary sealants for the success of endodontic treatment are discussed. The experimental studies were carried out in vitro on human teeth removed for medical reasons, except for caries, for which two groups of 16 teeth were separated. After the root canal was prepared, it was filled with studs and pellets of a filling material based on polyester materials, which has gained the common trade name of resilon or, less frequently, RealSeal (SybronEndo) with an epiphany sealant. The teeth for the first group were obturated by cold lateral condensation. In the second case the obturation was performed using the Thermo-Hydraulic-Condensation technique using System B and Obtura III. The experimental leakage testing was done using a scanning electron microscope SEM and a light stereoscopic microscope LSM, as typical research tools used in materialography. The research results, in a confrontation with the data taken from the literature studies, do not indicate the domination of resilon in endodontics.

Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment

The importance of endodontics is presented within our own concept of Dentistry Sustainable Development (DSD) consisting of three inseparable elements; i.e., Advanced Interventionist Dentistry 4.0 (AID 4.0), Global Dental Prevention (GDP), and the Dentistry Safety System (DSS) as a polemic, with the hypothesis of the need to abandon interventionist dentistry in favour of the domination of dental prevention. In view of the numerous systemic complications of caries that affect 3−5 billion people globally, endodontic treatment effectively counteracts them. Regardless of this, the prevention of oral diseases should be developed very widely, and in many countries dental care should reach the poorest sections of society. The materials and methods of clinical management in endodontic procedures are characterized. The progress in the field of filling materials and techniques for the development and obturation of root canals is presented. The endodontics market is forecast to reach USD 2.1 billion in 2026, with a CAGR of 4.1%. The most widely used and recognized material for filling root canals is gutta-percha, recognized as the “gold standard”. An alternative is a synthetic thermoplastic filler material based on polyester materials, known mainly under the trade name Resilon. There are still sceptical opinions about the need to replace gutta-percha with this synthetic material, and many dentists still believe that this material cannot compete with gutta-percha. The results of studies carried out so far do not allow for the formulation of a substantively and ethically unambiguous view that gutta-percha should be replaced with another material. There is still insufficient clinical evidence to formulate firm opinions in this regard. In essence, materials and technologies used in endodontics do not differ from other groups of materials, which justifies using material engineering methodology for their research. Therefore, a detailed methodological approach is presented to objectify the assessment of endodontic treatment. Theoretical analysis was carried out using the methods of procedural benchmarking and comparative analysis with the use of contextual matrices to virtually optimize the selection of materials, techniques for the development and obturation of root canals, and methods for assessing the effectiveness of filling, which methods are usually used, e.g., in management science, and especially in foresight research as part of knowledge management. The results of these analyses are presented in the form of appropriate context matrices. The full usefulness of the research on the effectiveness and tightness of root canal filling using scanning electron microscopy is indicated. The analysis results are a practical application of the so-called “digital twins” approach concerning the virtual comparative analysis of biomaterials used in endodontic treatment.

Shear bond strengths of calcium silicate-based sealer to dentin and calcium silicate-impregnated gutta-percha

AIM

To compare the shear bond strengths of a calcium silicate-based root canal sealer (CSS), to dentin or calcium silicate-impregnated gutta-percha (CSGP), with the shear bond strengths of an epoxy resin-based sealer.

METHODS

For sealer/dentin testing, 40 hemisectioned roots were divided into 2 groups. Coronal root dentin discs were bonded with CSS or epoxy resin-based sealer. For sealer/core material testing, CSGP and conventional gutta-percha discs were bonded with a matching sealer (N = 20 per group). The shear bond strengths were tested using a universal testing machine. The failed modes were analyzed using stereomicroscopy and scanning electron microscopy.

RESULTS

The CSS sealer had significantly higher shear bond strength to dentin than did epoxy resin-based sealer (P < .01). However, shear bond strengths of the 2 sealers to core materials did not significantly differ (P = .74). The remnants of the CSS sealer adhering to dentin or calcium silicate gutta-percha disc were observed.

CONCLUSIONS

The CSS sealer had better adhesion to dentin than did epoxy resin-based sealer. However, the bond of the CSS sealer to impregnated gutta-percha was not superior to the epoxy resin-based sealer bonded to conventional gutta-percha.

The Penetration Ability of Calcium Silicate Root Canal Sealers into Dentinal Tubules Compared to Conventional Resin-Based Sealer: A Confocal Laser Scanning Microscopy Study

The purpose of this study was to compare the penetration ability of calcium silicate root canal sealers and conventional resin-based sealer using confocal laser scanning microscopy (CLSM). A total of 60 recently extracted single-rooted human premolars were used in this study. The root canals were prepared to a size 40/0.06 taper with ProFile rotary instruments and irrigated with NaOCl and EDTA. After drying all canals, the specimens were randomly divided into three experimental groups (n = 20): Group 1, gutta-percha (GP)/AH Plus with continuous wave compaction; group 2, GP/BioRoot RCS with a single-cone technique; and group 3, GP/Endoseal MTA with a single-cone technique. All experimental samples were sectioned perpendicular to their long axis using a low-speed diamond wheel at the apical, middle, and coronal third levels. The penetration abilities of all samples were evaluated using CLSM. A Kruskal⁻Wallis analysis and a series of Mann⁻Whitney U post hoc tests were performed. A higher intensity level was found in the coronal area and a lower intensity level in the apical area in all the experimental groups. The AH Plus group showed higher sum fluorescence intensity in the apical and coronal thirds compared with the BioRoot RCS and Endoseal MTA groups, whereas the BioRoot RCS group showed a higher intensity level in the middle third, similar to the AH Plus group. The maximum sealer penetration depth was low in the apical area and high in the coronal area in the AH Plus and Endoseal MTA groups. In the BioRoot RCS group, maximum sealer penetration was observed in the middle third. In conclusion, there were significant differences in sealer penetration pattern and distance according to the root level and sealer type.

Evaluation of the Sealing Ability of Three Obturation Techniques Using a Glucose Leakage Test

The aim of this study was to evaluate the sealing ability of three different canal filling techniques. Sixty-four roots of extracted human maxillary anterior teeth were prepared using ProTaper® rotary instruments. The specimens were then randomly divided into 3 experimental groups (n = 16) and 2 control groups (n = 8). The root canals were filled using cold lateral compaction (CLC group), continuous wave condensation technique using the Elements Obturation Unit® (EOU group), and ProTaper obturators (PT group). For the negative control group, 8 roots were filled using lateral compaction as in the CLC group, and the teeth were covered twice with a layer of nail varnish (NCG group). Another 8 roots were filled using lateral compaction, but without sealer, and these were used as the positive control (PCG group). A glucose leakage model was used for quantitative evaluation of microleakage for 24 hours and 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, and 12 weeks. No significant difference in the cumulative amount of leakage was found between the three experimental groups at all observation times. The lateral condensation of cold gutta-percha can guarantee a similar seal of canal fillings as can be achieved by using thermal methods, in the round canals.

Resilon: Review of a New Material for Obturation of the Canal

Resilon is a thermoplastic synthetic polymer-based endodontic material alternative to gutta-percha. It contains bioactive glass and also radiopaque fillers. It has the same handling properties as gutta-percha. For endodontic retreatment, it may be dissolved with some solvents, such as chloroform or softened with heat. The composition of Resilon and its sealer (Epiphany) bond to dentin and form a monoblock. A review of the literature and a discussion of its properties comparing to other root canal filling materials are presented.

Sealing Efficacy of Single-cone Obturation Technique with MTA and CEM Cement: An in Vitro Bacterial Leakage Study

Background and aims. Various materials and methods have been introduced for obturating cleaned and shaped root canal systems. This in vitro study aimed to evaluate the sealing ability of single-cone obturation technique with mineral trioxide aggregate and calcium-enriched mixture based on bacterial leakage approach.

Materials and methods. Sixty-four single-canal teeth were prepared and randomly divided into 5 groups, consisting of three experimental groups (n = 16) and two control groups (n = 8).In group 1, root canal obturation was performed using gutta-percha with 0.02 taper and AH26 sealer by lateral compaction technique. In groups 2 and 3, single Protaper gutta-percha cone was used for obturation with MTA and CEM cement, respectively. A bacterial leakage apparatus was utilized for leakage assessment for 60 days. Leakage comparison between the experimental groups was performed by one-way ANOVA using SPSS 16 statistical software.

Results. The mean bacterial leakage intervals in groups 1, 2 and 3 were 33.68 ± 9.39, 40.68 ± 11.03 and 39.56 ± 9.03 days, respectively. One-way ANOVA indicated no significant differences in bacterial leakage between the three experimen-tal groups (P = 0.109).

Conclusion. Single-cone obturation with well-fitted gutta-percha and MTA and CEM cement is an appropriate alternative for traditional lateral compaction technique.

A Comparative in Vitro Study of Apical Microleakage with Five Obturation Techniques: Lateral Condensation, Soft-Core®, Obtura II®, Guttaflow® and Resilon®

AIM

A comparison was made between the root canal lateral condensation technique and other condensation techniques in which physical (temperature: Soft-Core®, Obtura II®) or chemical changes (condensation: Guttaflow®, Resilon®) may affect the dimensional stability of obturation and thus favor apical microleakage.

MATERIALS AND METHODS

A total of 212 single-root teeth removed for orthodontic or periodontal reasons were randomized to 5 groups of 40 teeth each. Six samples were used as positive controls, and another 6 as negative controls. The teeth were worked with the Hero 642 system, and each group was obturated using a different technique: lateral condensation, Obtura II®, Soft-Core®, Guttaflow® or Resilon®. The samples were immersed in black ink, and after 72 hours the teeth were transparentized using the technique described by Robertson. Filtration of the ink was measured under the stereoscopic microscope. Analysis of variance and post-hoc testing were used for the statistical analysis.

RESULTS

The Soft-Core® obturated group showed significantly greater microleakage than the other groups, with no differences among the rest of the groups.

CONCLUSIONS

Under the conditions of this study, the teeth obturated with the Soft-Core® technique showed greater apical microleakage than the other systems.

Lack of correlation between microbial penetration method and electro chemical technique for assessment of leakage through the root canal fillings

Aims:

The purpose of this study was to compare microbial penetration method and electrochemical technique for evaluation of the apical seal.

Materials and Methods:

A total of 28 teeth were prepared using the step-back technique to ISO size 40 master apical files. The specimens were randomly divided into an experimental group, two positive and two negative controls. Root canals in the experimental and negative control group were filled with gutta-percha (GP) and sealer, using lateral condensation technique. In the positive control group, canals were filled with GP without any sealer. The external surface of each tooth was coated with two layers of the nail varnish, except for the access opening and the apical foramen. In the negative control group, the teeth were completely covered with nail varnish. The apical seal was recorded with two methods, each successively used on the same teeth: An electrochemical method and a bacterial penetration method.

Statistical Analysis Used:

The correlation of the electro chemical readings with the results obtained from bacterial micro leakage test was evaluated by Pearson's correlation coefficient.

Results:

Correlation coefficient of the measurements obtained from the two evaluation methods, was 0.23 (r = 0.23), so the correlation was not statistically significant (P = 0.275).

Conclusions:

This study shows that several studies by different methods are necessary before evaluation of the marginal leakage.

Resilon: a comprehensive literature review

Background and aims. An ideal root canal filling material should completely seal the entire root canal space and block communication between the root canal system and its surrounding tissues; it should also be nontoxic, noncarcinogenic, non-genotoxic, biocompatible, insoluble in tissue fluids and dimensionally stable. Bonding to dentin is a promising property, which can prevent leakage and improve the sealing ability of root canal filling materials. Resilon was developed and rec-ommended initially because the existing rootcanal filling materials did not bond to root canal dentin. Since its introduction in 2004, numerous reports have been published regarding various aspects of this material. The aim of this literature review is to present investigations regarding Resilon's physical and chemical properties and leakage studies. Materials and methods. A review of the literature was performed by using electronic and hand searching methods for Resilon from May 2004 to April 2012. Results. There are many published reports regarding Resilon. The searchshowed that Resilon is composed of a parent polymer, polycaprolactone or Tone, which is a biodegradable aliphatic polyester, with filler particles consisting of bioactive glass, bismuth oxychloride and barium sulfate. It possesses some antibacterial and antifungal properties. It is a promising material for root canal filling. Despite the presence of numerous case reports and case series regarding these applications, there are few designed research studies on clinical applications of this material. Resilon has some drawbacks such as high cost. Conclusion. Resilon seals well and is a biocompatible material. However, more clinical studies are needed to confirm its efficacy compared with other materials.

In vitro resistance to fracture of roots obturated with Resilon or gutta-percha

INTRODUCTION

There have been varied results from studies comparing postendodontic fracture resistance between teeth obturated with Resilon or gutta-percha. This study was performed to evaluate the fracture resistance of roots obturated by using Resilon (RealSeal system) or gutta-percha (with AH Plus sealer).

METHODS

Eighty extracted human mandibular single-rooted premolars stored in 10% formalin were used in the study. They were prepared by using a crown-down technique, debrided with NaOCl, ethylenediaminetetraacetic acid, and sterile water and divided into 4 groups. Obturation was performed by using the lateral condensation method. The negative control group consisted of unfilled specimens, and the positive control group consisted of those obturated with flowable, dual-cure composite resin. All root specimens were stored for 2 weeks in 100% humidity to allow complete setting of the sealer. Each specimen was mounted in acrylic in a polyvinyl ring and tested for fracture resistance with the Universal testing machine. The loading fixture of the machine was mounted with its spherical tip aligned with the center of the canal opening of each root. A vertical loading force was applied until it fractured the root. The force values were subjected to statistical analysis including analysis of variance and Fisher least significant difference testing.

RESULTS

Teeth obturated with Resilon were more resistant to fracture than those obturated with gutta-percha. The difference was found to be highly significant (P=.00001).

CONCLUSIONS

Resilon increased the resistance to fracture of single-rooted teeth in vitro.

Potential systematic error in laboratory experiments on microbial leakage through filled root canals: review of published articles

AIM

To systematically evaluate whether published studies on microbial leakage through filled root canals in human teeth embedded in a two-chamber system were properly controlled. Specifically, the control for the assumption that leakage should occur through the root canal rather than other routes was investigated.

METHODOLOGY

A systematic search was conducted using Medline, Biosis, Cochrane, Embase, and Web of Science databases. In addition, the reference lists of review articles pertaining to the topic were searched. No language restriction was applied. Two independent reviewers screened titles and abstracts. All articles deemed appropriate by either reviewer were included in the full-text evaluation. In case of disagreement, a referee arbitrated between the reviewers.

RESULTS

With 93.8% agreement prior to discussion and arbitration, 67 articles were included. On average, the size of the negative control group was 30% (mean) of the n in the experimental groups (minimum=0.0%, maximum=100%, SD=27%). The majority of studies (57 of 67) used inadequate negative controls. The whole root was covered with the sealing material in these specimens, whilst the root tip was left uncovered in the experimental groups. Consequently, leakage between outer root surface and sealing material was not controlled for. The authors of the remaining 10 communications did not state clearly how negative control assessments were performed.

CONCLUSIONS

Experimental investigations should be performed to assess the routes of microbial leakage in two-chamber models.