Ultrasonic osteotomy in oral surgery and implantology

Short-Term Evaluation of Prosthetic Rehabilitation of Thin Wiry Ridge by Ridge Splitting and Simultaneous Implants Placement: Non-randomized Control Trial

Objective  This article evaluates the success of prosthetic rehabilitation of thin wiry ridge and implants placed simultaneously in splitted ridge both clinically and radiographically.

Materials and Methods  Twenty-one participants were enrolled of which 13 patients (8 females and 5 males) were suffering from maxillary ridge atrophy and 8 patients (5 females and 3 males) had mandibular ridge atrophy; a total of 42 implants were performed using the ridge expansion technique. The expansion was performed using the conventional disk technique, piezoelectric corticotomy, and self-threading expanders. Implants were placed and loaded with fixed partial denture after 4 months for the mandible and 6 months for the maxilla. Implant stability quotient (ISQ) was measured at T0 (implant placement) and TL (loading). Crestal bone levels were measured at different times: T0, TL, and T12 (12 months). Evaluation of prosthetic and surgical complications was carried out. Data were analyzed and compared using analysis of variance and paired t -tests at a significance level of 5%.

Results  All implants met the criteria for success. All implants showed a higher mean bone loss from T0 to TL (1.259 ± 0.3020) than from TL to T12 (0.505 ± 0.163) with a statistically significant difference ( p  < 0.0001). ISQ values sharply increased at the time of loading (72.52 ± 2.734) than at implant insertion (44.5 ± 4.062) with a significant difference ( p  < 0.0001). Minor prosthetic and surgical complications were reported.

Conclusion  The results from this study support the efficacy of prosthetic rehabilitation of thin wiry ridge using split ridge technique and the success of implants placed simultaneously in splitted ridge.

Bone Healing Evaluation Following Different Osteotomic Techniques in Animal Models: A Suitable Method for Clinical Insights

Osteotomy is a common step in oncological, reconstructive, and trauma surgery. Drilling and elevated temperature during osteotomy produce thermal osteonecrosis. Heat and associated mechanical damage during osteotomy can impair bone healing, with consequent failure of fracture fixation or dental implants. Several ex vivo studies on animal bone were recently focused on heating production during osteotomy with conventional drill and piezoelectric devices, particularly in endosseous dental implant sites. The current literature on bone drilling and osteotomic surface analysis is here reviewed and the dynamics of bone healing after osteotomy with traditional and piezoelectric devices are discussed. Moreover, the methodologies involved in the experimental osteotomy and clinical studies are compared, focusing on ex vivo and in vivo findings.

A Modified Ridge Splitting Technique Using Autogenous Bone Blocks-A Case Series

Background: Alveolar atrophy following tooth loss is a common limitation of rehabilitation with dental implant born prostheses. Ridge splitting is a well-documented surgical method to restore the width of the alveolar ridge prior to implant placement. The aim of this case series is to present a novel approach to ridge expansion using only autogenous bone blocks. Methods: Patients with Kennedy Class I. and II. mandibles with insufficient bone width were included in this study. Ridge splitting was carried out with the use of a piezoelectric surgery device by preparing osteotomies and after mobilization of the buccal cortical by placing an autologous bone block harvested from the retromolar region as a spacer between the buccal and lingual cortical plates. Block-grafts were stabilized by osteosynthesis screws. Implant placement was carried out after a 3-month healing period. A total of 13 implants were placed in seven augmented sites of six patients. Results: Upon re-entry, all sites healed uneventfully. Mean ridge width gain was 2.86 mm, range: 2.0–5.0 mm. Conclusions: Clinical results of our study show that the modified ridge splitting technique is a safe and predictable method to restore width of the alveolar ridge prior to implant placement.

Evaluation of temperature and osteotomy speed with piezoelectric system

BACKGROUND

Piezosurgery is an option to realize several clinical and surgical procedures, due to its advantages as precision in osteotomy. This study aims to evaluate the heating and osteotomy speed in bone blocks of ox's shins, to report the best way of its use in the clinical practice.

METHODS

A bone blocks had the dimensions as follow: 20 mm length, 10 mm width, and 5 mm wide. It was evaluated 5 different groups: group LM (low speed and medium pressure); group HM (high speed and medium pressure); group HH (high speed and high pressure); group LH (low speed and high pressure); group LL (low speed and low pressure). The heating increasement was measured with a thermal viewer and the osteotomy was timed when the cut depth reached 5 mm and the whole block detached itself. One-way ANOVA and Tukey tests were adopted to analyze the data and the level of significance was set at a P value of 0.05.

RESULTS

The pressure and speed of the tip, works directly in the generated temperature during osteotomy. The medium pressure level is the most favorable, because high pressure level caused a high increase in heating over the bone and low pressure presented a very long osteotomy time.

CONCLUSIONS

The high speed and medium pressure can be suggested as the most efficient in both standards of time/temperature to realize the osteotomy.

Minimal Invasive Piezoelectric Osteotomy in Neurosurgery: Technic, Applications, and Clinical Outcomes of a Retrospective Case Series

Objective: To report the physical and technical principles, clinical applications, and outcomes of the minimal invasive piezoelectric osteotomy in a consecutive veterinary neurosurgical series.

METHODS

A series of 292 dogs and 32 cats underwent an osteotomy because a neurosurgical pathology performed with a Mectron Piezosurgery^® bone scalpel (Mectron Medical Technology, Genoa, Italy) was retrospectively reviewed. Efficacy, precision, safety, and blood loss were evaluated intraoperatively by two different surgeons, on a case-by-case basis. Postoperative Rx and CT scans were used to assess the selectivity and precision of the osteotomy. A histological study on bony specimens at the osteotomized surface was carried out to evaluate the effects of piezoelectric cutting on the osteocytes and osteoblasts. All the patients underwent a six-months follow-up. A series of illustrative cases was reported.

RESULTS

All the osteotomies were clear-cut and precise. A complete sparing of soft and nervous tissues and vasculature was observed. The operative field was blood- and heat-free in all cases. A range of inserts, largely different in shape and length, were allowed to treat deep and difficult-to-reach sites. Two mechanical complications occurred. Average blood loss in dogs' group was 52, 47, and 56 mL for traumatic, degenerative, and neoplastic lesions, respectively, whereas it was 25 mL for traumatized cats. A fast recovery of functions was observed in most of the treated cases, early on, at the first sixth-month evaluation. Histology on bone flaps showed the presence of live osteocytes and osteoblasts at the osteotomized surface in 92% of cases.

CONCLUSIONS

Piezosurgery is based on the physical principle of the indirect piezo effect. Piezoelectric osteotomy is selective, effective, and safe in bone cutting during neurosurgical veterinary procedures. It can be considered a minimal invasive technique, as it is able to spare the neighboring soft tissues and neurovascular structures.

Bimaxillary orthognathic surgery with a conventional saw compared with the piezoelectric technique: a longitudinal clinical study

The only cutting technique used for osteotomies in orthognathic surgery for many years has been a saw, but recently piezoelectric surgery has been introduced as a possible alternative. The aim of this study was to find out if piezoelectric surgery can be more comfortable for patients having orthognathic surgery. A total of 25 patients with dentofacial deformities (seven male and 18 female), were treated from January 2016 to September 2017. In 11 patients, osteotomies were made using a conventional saw, while in 14 a piezoelectric device was used. The variables assessed were: operating time, postoperative swelling, postoperative pain, and cutaneous sensitivity of the upper and lower lips. The duration of operation for the piezosurgery group was significantly longer than that for controls, but the patients had less swelling at all follow-up visits, and the difference was significant at the 30-day follow-up (p=0.045). Those who had piezosurgery had significantly less pain at the three-day follow up (p=0.035). There was a significant difference in cutaneous sensitivity only for the right side of the upper lip and only at the one-day follow-up. We conclude that piezoelectric surgery offers some advantages in lessening swelling and the perception of pain after orthognathic surgery, but further investigations are required.

Neurosensory Disturbances After Bilateral Sagittal Split Osteotomy Using Piezoelectric Surgery: A Systematic Review

PURPOSE

The objective of the present systematic review was to test the hypothesis of no difference in neurosensory disturbances (NSDs) after bilateral sagittal split osteotomy (BSSO) with piezoelectric surgery compared with conventional techniques.

MATERIALS AND METHODS

A PubMed (Medline), Embase Library, and Cochrane Library search in combination with a manual search of relevant journals was conducted from January 2000 to November 2017. Randomized controlled trials and controlled trials in humans were considered. Primary outcome measures (assessment of neuro-sensitivity by subjective and objective evaluations) and secondary outcome measures (NSD risk factors, patient-reported outcome measures, complications, operating time, and intraoperative bleeding) were considered.

RESULTS

The search provided 241 studies of which 5 eligible studies were included. Meta-analysis was not possible because of considerable heterogeneity. Two studies were characterized by a moderate risk of bias and 3 were characterized by a high risk of bias. Piezoelectric surgery substantially decreased NSDs as evaluated by subjective tests. NSD after BSSO varied from 1.8 to 23.0% with piezoelectric surgery and from 7.3 to 52.0% with conventional techniques after 2 to 12 months. Furthermore, piezoelectric surgery seemed to considerably decrease the frequency of intraoperative bleeding in bimaxillary procedures and decrease the risk of an unfavorable split of the mandible and macroscopic damage of the inferior alveolar nerve.

CONCLUSIONS

The hypothesis of no difference in NSD after BSSO with piezoelectric surgery compared with conventional techniques could be neither confirmed nor rejected owing to insufficient knowledge. However, piezoelectric surgery seems to decrease the risk of NSDs after BSSO compared with conventional techniques. Long-term randomized controlled trials comparing the 2 treatment modalities by standardized subjective and objective electrophysiologic tests are needed before one treatment modality can be considered superior to another.

Relationship Between the Quantity of Nerve Exposure During Bilateral Sagittal Split Osteotomy Surgery and Sensitive Recovery

AIM AND OBJECTIVES

The purpose of this study was to evaluate how different exposures of the V3 nerves during orthognathic surgery impact neurosensory disturbances.

METHODS

The study included 127 patients who underwent either bilateral sagittal split osteotomy (BSSO) or BSSO with maxillary le Fort 1. They were divided into 6 groups, identified by the quantity of V3 nerve exposure. All patients were examined in a pre-op period and again after 1, 3, 6 months post-op. The standardized tests used were to clarify the objective and subjective neurosensory status of the exposed nerve. Neurosensory evaluation included; a pin prick test, the 2 points discriminator, light touch, warm and cold tests, and blunt discrimination. They were all done bilaterally on the lower lip area.

RESULTS

In only 2 patients the nerve was damaged during surgery and thus they were not included in this study. In 10.2% of patients there was no nerve exposure, 25.2% had longitudinal vestibular segment nerve exposed, 22.8% had the longitudinal upper-vestibular segment exposed, 20.5% had the longitudinal lower-vestibular segment exposed, 14.2% had the longitudinal upper-lower-vestibular segment exposed, and in 7.1% of patients the nerve was totally exposed. Given the estimated time of 1 month there was 100% recovery in patients whose nerve was unexposed. Considering the other patients, the authors had a variable number of patients who did not recover completely.

CONCLUSION

The authors estimate a correlation between the recovery time and the quantity of the exposed nerve. There is a high incidence of neurosensory disturbance in the lower lip and chin after BSSO and intraoperative quantity of nerve exposure.

Effects of Piezoelectric Surgery on Bone Regeneration Following Distraction Osteogenesis of Mandible

The aim of this study is to compare the bone healing in the distraction gap following the osteotomy performed with piezoelectric and conventional devices for the distraction osteogenesis in the rabbit mandibles. Twelve rabbits were randomly divided into 2 groups; 6 for piezoelectric device and 6 for rotary instruments. After 3 days of latency period, distraction was started at a rate of 1 mm per day for 10 days. All the animals were sacrificed after 4 weeks of consolidation phase for histological and histomorphological evaluation. Histological evaluation revealed thick trabecular bone formation in all of the specimens. Inflammation scores were chronic minimal. The mean percentages of the bone area in distraction gap are 62% in group P and 57% in group R. However, the difference between 2 groups was not statistically significant (P > 0.05). Our results revealed a slight increase in bone formation in the distraction gap in piezo-osteotomy groups histologically though not statistically supported. However, there is still a need for more histological studies with larger sample sizes evaluating the bone structure following piezo-osteotomies.

Piezoelectric compared with conventional rotary osteotomy for the prevention of postoperative sequelae and complications after surgical extraction of mandibular third molars: a systematic review and meta-analysis

The purpose of this review was to determine if postoperative sequelae (facial swelling, trismus, pain) and neurological complications are reduced when mandibular third molars are surgically extracted using a piezoelectric device for osteotomy compared with conventional rotary burs, and to determine if there is a difference in operating time between the two techniques. Clinical trials were identified through a search (April 2015) on the PubMed, EMBASE, Cochrane Central Register of Controlled Trials (CENTRAL) and Google Scholar databases. Studies were assessed by study type, characteristics of participants, sample size, surgical technique, cointerventions, outcomes, risk of bias, and findings. We calculated a Grading of Recommendations, Assessment, Development, and Evaluation (GRADE) rating of confidence in the effect estimates. We identified 2515 citations and found 15 eligible clinical trials. Patients who had osteotomies with the piezoelectric device had less facial swelling (standard mean difference -1.15; 95% CI -2.02 to -0.27; p<0.0001), trismus (greater maximum mouth opening, standard mean difference 0.78; 95% CI 0.56 to 1.00; p=0.33) and pain (standard mean difference -0.84; 95% CI -1.55 to -0.13; p<0.0001) at day 1, less facial swelling at day 7 (standard mean difference -0.98; 95% CI -1.52 to -0.44; p=0.05), and a reduced risk of neurological complications (odds ratio (OR) 0.28; 95% CI 0.09 to 0.89; p=0.79). Trismus at day 7 and pain at day 5 did not differ significantly between the two methods. Operating time was longer with the piezoelectric device (standard mean difference 0.83; 95% CI 0.57 to 1.09; p=0.001). The confidence in the effect estimates was low or very low across all outcomes. The findings raise the possibility of an improved clinical healing response to osteotomy with the piezoelectric device compared with one done with conventional rotary burs for surgical extractions of mandibular third molars.

Complex craniofacial advancement in paediatric patients: Piezoelectric and traditional technique evaluation

PURPOSE

The piezoelectric device allows bone cutting without damaging the surrounding soft tissues. The purpose of this study was to assess the role of this surgical instrument in paediatric craniofacial surgery in terms of safety and surgical outcomes.

METHODS

Thirteen consecutive paediatric patients underwent craniofacial Le Fort osteotomies type III and IV. The saw was used on the right side in seven patients and on the left side in six patients; the piezoelectric instrument was used on the right side in six patients and on the left side in seven patients. Intraoperative blood loss, surgical procedure length, incision precision, postoperative haematoma and swelling, and nerve impairment were evaluated to compare the outcomes of both procedures.

RESULTS

A longer surgical procedure was observed in 28% of the patients when using the piezoelectric device (p = 0.032), with an intraoperative blood loss reduction of 18% (p = 0.156). Greater precision in bone cutting was reported, together with a reduction in the requirement to protect and incise adjacent soft tissues during piezoelectric osteotomies. There was a lower incidence of postoperative haematoma and swelling following piezo-osteotomy, and a significant reduction in postoperative nerve impairment (p = 0.002).

CONCLUSIONS

The ultrasonic surgical device guaranteed a clean bone cut, preserving the integrity of the adjacent soft tissues beneath the bone. Although the time required for a piezoelectric osteotomy was longer, the total operation time remained approximately the same. In conclusion, the device's lack of power appears to be a minor problem compared with the advantages, and an ultrasonic device could be considered a valuable instrument for paediatric craniofacial advancement.

Piezoelectric Sensor to Measure Soft and Hard Stiffness with High Sensitivity for Ultrasonic Transducers

During dental sinus lift surgery, it is important to monitor the thickness of the remaining maxilla to avoid perforating the sinus membrane. Therefore, a sensor should be integrated into ultrasonic dental tools to prevent undesirable damage. This paper presents a piezoelectric (PZT) sensor installed in an ultrasonic transducer to measure the stiffness of high and low materials. Four design types using three PZT ring materials and a split PZT for actuator and sensor ring materials were studied. Three sensor locations were also examined. The voltage signals of the sensor and the displacement of the actuator were analyzed to distinguish the low and high stiffness. Using sensor type T1 made of the PZT-1 material and the front location A1 provided a high sensitivity of 2.47 Vm/kN. The experimental results demonstrated that our design can measure soft and hard stiffness.

Piezoelectric Bone Surgery: A Review of the Literature and Potential Applications in Veterinary Oromaxillofacial Surgery

Piezoelectric bone surgery is a recent and innovative technology, permitting a selective cut of mineralized tissue while sparing soft tissue. Similar to a dental scaler, a high frequency vibration, in the range of 25-35 kHz, is transmitted to a metallic tip. However, the power of the piezosurgical instrument is three to six times higher than that of a dental scaler. The major advantages of this technology include high precision, a design that increases ease of curvilinear osteotomy, less trauma to soft tissue, preservation of neurological and vascular structures, reduced hemorrhage, minimal thermal damage to the bone, as well as overall improvement of healing. The handpiece of the instrument is equipped with a sterile irrigation system and light-emitting diode (LED) light, which improves visibility and overall safety. Piezoelectric surgery is particularly useful when performing delicate bone procedures such as periodontal or endodontic surgery. It is also indicated when performing more invasive bone surgery such as maxillectomy, mandibulectomy, and condylectomy, where preservation of neurovascular structures is important. Piezoelectric instruments are different from rotary instrumentation or oscillating saws, they require light pressure with constant motion of the tip. Training is required to master the technique.

Role of ultrasonography in oral and maxillofacial surgery: a review of literature

Maxillofacial surgery, like any other surgical specialty is greatly dependent on the discipline of radiology. This poses a greater challenge because of the complex anatomy of this region. Various investigation modalities have been applied in diagnosing various diseases which are found in the maxillofacial region, including IOPA, PET, USG, CT, MRI and panoramic radiographs. Of these, USG can easily diagnose non invasive and soft tissue diseases. It is very useful in diagnosing the diseases which are not usually evident on a conventional radiograph. However; many of the dentists are not aware of the benefits of USG in diagnosis of oral diseases. In this article, the use of ultrasound in diagnosing the various pathologies of maxillofacial region is elaborated.

Primary stability comparison using piezoelectric or conventional implant site preparation systems in cancellous bone: a pilot study

PURPOSE

This study compares implant primary stability achieved in cancellous bone after placement in piezoelectric prepared sites versus conventionally drilled sites.

MATERIALS AND METHODS

Four bovine ribs were randomly assigned and placed in a water bath at 36.5 °C. Five sites per rib (total n = 20 sites) were prepared using piezoelectric system (test) or conventional drills (control) with twenty 10 × 3.6-mm Implantium implants placed. Using Osstell Mentor quantitative analysis, 5 resonance frequency analysis [implant stability quotient {ISQ}] values per implant were recorded at 5 locations for a total of 100 measurements.

RESULTS

Independent t test analysis indicated significant difference in primary stabilities between groups: t (17) = 2.637, P = 0.17, with equal variance assumption satisfied (P = 0.196). Examination of means indicated a higher mean ISQ for piezoelectric than for conventional: 58.9 (+8.55) versus 49.2 (+7.33), respectively. Analysis of variance indicated a significant difference in mean ISQ value by rib. Tukey test indicated significantly higher ISQ values for rib A (test) than ribs B, C (control), and D (test).

CONCLUSION

Implant site preparation using the piezoelectric system gives higher implant primary stability in cancellous bone. However, variations in quality across bones may have affected the results.

Mandibular bone and soft tissues necrosis caused by an arsenical endodontic preparation treated with piezoelectric device

This paper describes a case of wide mandibular bone necrosis associated with significant soft tissues injury after using an arsenical endodontic preparation in the right lower second molar for endodontic purpose. Authors debate about the hazardous effects of the arsenic paste and the usefulness of piezosurgery for treatment of this drug related bone necrosis.

The animal experiment of a new optimised distraction implant

Our aim was to evaluate the function of a new optimised distraction implant. Six dogs with alveolar bone defects had a total of 18 distraction, and 6 normal, implants inserted into edentulous mandibular ridges after osteotomy. Five days after insertion the distraction implants were activated at a rate of 1 mm/2 days to achieve a distraction height of 6mm. Radiographs were taken at 0, 1, 2, and 3 months after distraction. Two dogs were killed after 1, 2, and 3 months, respectively, and 12 distraction implants taken from the different time points were evaluated by microcomputed tomographic (MicroCT) scanning and histological examination. The other 6 distraction, and the 6 normal, implants were compared after osseointegration with a fatigue test. The results showed that all the distraction implants had successfully distracted the bone to the anticipated height. Radiographs showed that the density of the regenerated bone increased steadily during the consolidation period. MicroCT showed that the regenerated bone was comparable with the native bone 3 months after distraction. Both native and regenerated bone had osseointegrated histologically by 1 month and 3 months after distraction. The experiment successfully confirmed the usefulness and feasibility of this new distraction implant, and suggests interesting clinical uses.

Endoscopic-assisted resection of peripheral osteoma using piezosurgery

Endoscopic-assisted surgery has gained widespread popularity as a minimally invasive procedure, particularly in the field of maxillofacial surgery. Because the surgical field around the mandibular angle is extremely narrow, the surrounding tissues may get caught in sharp rotary cutting instruments. In piezosurgery, bone tissues are selectively cut. This technique has various applications because minimal damage is caused by the rotary cutting instruments when they briefly come in contact with soft tissues. We report the case of a 33-year-old man who underwent resection of an osteoma in the region of the mandibular angle region via an intraoral approach. During surgery, the complete surgical field was within the view of the endoscope, thereby enabling the surgeon to easily resection the osteoma with the piezosurgery device. Considering that piezosurgery limits the extent of surgical invasion, this is an excellent low-risk technique that can be used in the field of maxillofacial surgery.

A spectroscopic approach to monitor the cut processing in pulsed laser osteotomy

During laser osteotomy surgery, plasma arises at the place of ablation. It was the aim of this study to explore whether a spectroscopic analysis of this plasma would allow identification of the type of tissue that was affected by the laser. In an experimental setup (Rofin SCx10, CO(2) Slab Laser, wavelength 10.6 μm, pulse duration 80 μs, pulse repetition rate 200 Hz, max. output in cw-mode 100 W), the plasma spectra evoked by a pulsed laser, cutting 1-day postmortem pig and cow bones, were recorded. Spectra were compared to the reference spectrum of bone via correlation analysis. Our measurements show a clear differentiation between the plasma spectra when cutting either a bone or a soft tissue. The spectral changes could be detected from one to the next spectrum within 200 ms. Continuous surveillance of plasma spectra allows us to differentiate whether bone or soft tissue is hit by the last laser pulse. With this information, it may be possible to stop the laser when cutting undesired soft tissue and to design an automatic control of the ablation process.

Posterior maxillary segmental osteotomy concomitant with sinus lift using a piezoelectric device

Tooth loss evokes functional and esthetic problems, and adjacent teeth can move if they are not corrected in a timely manner, rendering the problems of restoring the dentition more complex. If the opposing tooth is consequently extruded, several treatment modalities may be adopted, such as occlusal adjustment, crown prosthesis, orthodontic treatment, and segmental osteotomy. Segmental osteotomy is the most aggressive and invasive treatment for restoring a problematic occlusal plane due to the complications, such as hemorrhage, loss of tooth vitality, or necrosis of the segment. Piezoelectric devices have recently been used in oral surgery and implant dentistry because they preserve the soft tissue. In this report, we describe a bilateral posterior segmental osteotomy procedure to correct a collapsed occlusal plane with sinus mucosa elevation, using piezoelectric devices to preserve the integrity of the sinus membrane and the posterior superior alveolar artery.

Clinical evaluation of split-crest technique with ultrasonic bone surgery for narrow ridge expansion: status of soft and hard tissues and implant success

PURPOSE

The aim of this study was to evaluate the split-crest technique with ultrasonic bone surgery for implant placement in patients with narrow ridges, focusing on the status of soft and hard tissues and on implant success rate, at least 6 months after implant loading.

MATERIALS AND METHODS

During September 2007 and November 2008, 15 patients received 37 implants (BTI implants) with split-crest surgical procedure using ultrasonic bone surgery. Plasma rich in growth factors (PRGF®) was applied during split crest procedure to promote tissue regeneration. Implant surfaces were humidified with PRGF to accelerate osseointegration. Patients were recalled for a final clinical evaluation at least 6 months after implant loading. Clinical assessment included the status of soft and hard tissues around implants, and implants' success rate.

RESULTS

Thirty-seven implants in 15 patients were evaluated between July 2009 and January 2010. The status of soft tissues was very good, showing adequate plaque index, bleeding index, and probing depth values. Success rate of implants at the end of follow-up (between 11 and 28 months after insertion) was 100%. Bone ridge was measured and compared at final examination showing a mean ridge expansion of 3.35 mm (SD: 0.34).

CONCLUSIONS

Split-crest with ultrasonic bone surgery can be considered an effective and safe procedure for narrow ridge expansion.