Effect of lactic acid irrigant on shear bond strength of Epiphany adhesive sealer to human dentin surface

Dentin moisture conditions strongly influence its interactions with bioactive root canal sealers

Objectives

It is known that bioactive materials interact with the dentin to undergo biomineralization. The exact role of moisture in this interaction is unknown. Here, we investigate the effects of dentin moisture conditions on the dislocation resistance of two bioactive root canal sealers (MTA Fillapex [Angelus Solucoes Odontologicas] and GuttaFlow BioSeal [Colténe/Whaledent AG]) at 3 weeks and 3 months after obturation.

Materials and Methods

Mandibular premolars (n = 120) were prepared and randomly divided into 3 groups based on the dentin condition: group 1, dry dentin; group 2, moist dentin; group 3, wet dentin. Each group was divided into 2 subgroups for root canal filling: MTA Fillapex and GuttaFlow BioSeal. Dislocation resistance was evaluated by measuring the push-out bond strength at 3 weeks and 3 months. Failure modes were examined under a stereomicroscope. Data were statistically analyzed by Kruskal-Wallis test with a significance level of 5%.

Results

Moist dentin resulted in higher bond strength values for both materials at both time points. This was significantly higher than wet and dry dentin for both the sealers at the 3 months (p < 0.05), while at 3 weeks it was significant only for GuttaFlow Bioseal. The different moisture conditions demonstrated similar trends in their effects on the dislocation resistance of the 2 root canal sealers.

Conclusions

The dentin moisture conditions had a significant impact on its interaction with the bioactive materials tested. Maintaining moist dentin, but not dry or wet dentin, may be advantageous before the filling root canals with bioactive sealers.

The impact of etching time and material on bond strength of self-adhesive resin cement to eroded enamel

The purpose of this study was to assess the effect of pre-etching time and material on shear bond strength (SBS) of self-adhesive resin cements to eroded and sound enamel. Eroded enamel specimens were assigned into 5 groups (n=20 each) based on enamel surface treatment as follow: Group N, eroded enamel (without surface pre-treatment); Group PH15, 35% H₃PO₄ etching for 15 s; Group PH30, 35% H₃PO₄ etching for 30 s; Group L30, 20% lactic acid etching for 30 s and Group L60, 20% lactic acid etching for 60 s.Composite blocks were fabricated and cemented to enamel surfaces with one of two self-adhesive cements. Notched-edge SBS was assessed. Bond strength of self-adhesive cement to eroded enamel surface significantly enhanced following application of 20% lactic acid for 30 s.

Effect of 95% Ethanol as a Final Irrigant before Root Canal Obturation in Primary Teeth: An in vitro Study

Background: Successful obturation in the primary teeth demands complete dryness of the root canal system.

Aim: The purpose of this study was to determine the effect of 95% ethanol as the final irrigant before root canal obturation in primary teeth.

Materials and methods: A total of 20 extracted primary mandibular canines were biomechanically prepared and pre-obturated volume of each tooth was assessed using spiral computed tomography (CT). The specimens were divided into two groups (n = 10): group 1, Metapex group; group 2, zinc oxide eugenol group. Each group was further divided randomly into two subgroups (n = 5): subgroup 1, canals were dried with 95% ethanol; subgroup 2, canals were blot dried with paper points with the last one appearing dry. All canals were obturated and the postobturated volume of each tooth was measured. The percentage of obturated volume (POV) was calculated using the formula: (postobturated volume/preobturated volume) × 100. The POV between the groups was statistically analyzed using Mann-Whitney test and Wilcoxon Signed rank test appropriately.

Results: Root canals that were dried with ethanol showed better obturation than using paper points alone and the difference was statistically significant in both group 1 (p < 0.001) and group 2 (p < 0.002).

Conclusion: Drying of the root canal system with 95% ethanol can result in better obturation in the primary teeth.

How to cite this article: Thiruvenkadam G, Asokan S, John B, Geetha Priya PR. Effect of 95% Ethanol as a Final Irrigant before Root Canal Obturation in Primary Teeth: An in vitro Study. Int J Clin Pediatr Dent 2016;9(1):21-24.

Eradication of enterococci biofilms by lactic acid alone and combined with chlorhexidine and cetrimide

Objective: The antimicrobial activity of lactic acid (LA) alone or in combination with chlorhexidine (CHX) and cetrimide (CTR) against three Enterococcus faecalis strains, E. faecalis ATCC 29212, E. faecalis EF-D1 and E. faecalis U-1765, one Enterococcus durans strain and one dual-species biofilm was investigated. Study Design: The irrigating solutions tested were 20%, 15%, 10%, 5% and 2.5% LA, alone and in combination with 2% CHX and with 0.2% CTR. The biofilms were grown in the MBECTM high-throughput device for 24 hours and exposed to the solutions for 30 seconds and 1 minute. “Eradication” was defined as 100% bacterial kill. Results: Twenty percent LA eradicated all enterococci biofilms after 30 seconds contact time. The association of LA + 0.2% CTR achieved better results than LA alone, in contrast with the results obtained using LA + 2% CHX. E. durans was eradicated by all the tested solutions at 1 minute. The dual-species biofilm, E. faecalis ATCC 29212 + E. durans, gave intermediate values of the pure cultures. Conclusions: LA is capable of eradicating enterococci biofilm at a concentration of 20%. The combination of lower concentrations with 0.2% CTR achieved eradication after 1 minute.

Key words:Biofilm, cetrimide, chlorhexidine, enterococcus durans, enterococcus faecalis.

Antimicrobial substantivity over time of chlorhexidine and cetrimide

INTRODUCTION

To reach an adequate control of dentin infection and to promote success in endodontic therapy, antimicrobial irrigating solutions with confirmed substantivity are recommended. The aim of the present study was to evaluate the antimicrobial substantivity against Enterococcus faecalis of a dentin-volumetric unit exposed for 1 minute to chlorhexidine (CHX) and cetrimide (CTR).

METHODS

Standardized coronal dentin blocks of human molars, with and without collagen, were treated for 1 minute with 0.2% and 2% CHX and 0.2% CTR. Afterwards, they were exposed to E. faecalis suspension to determine the antimicrobial substantivity over a period of 60 days. Results were analyzed by means of Kaplan-Meier survival analysis (P < .05).

RESULTS

A direct relationship was seen between CHX concentration and survival time, and the most statistically significant results were obtained in specimens with collagen. CTR showed intermediate survival values close to those of 2% CHX.

CONCLUSIONS

The present study shows that 2% CHX used for 1 minute provides the longest substantivity followed by 0.2% CTR when applied to a dentin-volumetric model.

Dentin moisture conditions affect the adhesion of root canal sealers

INTRODUCTION

The purpose of this study was to evaluate the effects of intraradicular moisture conditions on the push-out bond strength of root canal sealers.

METHODS

Eighty root canals were prepared using rotary instruments and, thereafter, were assigned to 4 groups with respect to the moisture condition tested: (1) ethanol (dry): excess distilled water was removed with paper points followed by dehydration with 95% ethanol, (2) paper points: the canals were blot dried with paper points with the last one appearing dry, (3) moist: the canals were dried with low vacuum by using a Luer adapter for 5 seconds followed by 1 paper point for 1 second, and (4) wet: the canals remained totally flooded. The roots were further divided into 4 subgroups according to the sealer used: (1) AH Plus (Dentsply-Tulsa Dental, Tulsa, OK), (2) iRoot SP (Innovative BioCeramix Inc, Vancouver, Canada), (3) MTA Fillapex (Angelus Indústria de Produtos Odontológicos S/A, Londrina, Brasil), and (4) Epiphany (Pentron Clinical Technologies, Wallingford, CT). Five 1-mm-thick slices were obtained from each root sample (n = 25 slices/group). Bond strengths of the test materials to root canal dentin were measured using a push-out test setup at a cross-head speed of 1 mm/min. The data were analyzed statistically by two-way analysis of variance and Tukey tests at P = .05.

RESULTS

Irrespective of the moisture conditions, iRoot SP displayed the highest bond strength to root dentin. Statistical ranking of bond strength values was as follows: iRoot SP > AH Plus > Epiphany ≥ MTA Fillapex. The sealers displayed their highest and lowest bond strengths under moist (3) and wet (4) conditions, respectively.

CONCLUSIONS

The degree of residual moisture significantly affects the adhesion of root canal sealers to radicular dentin. For the tested sealers, it may be advantageous to leave canals slightly moist before filling.