Homogeneity of root canal fillings performed by undergraduate students with warm vertical and cold lateral techniques

Evaluation of quality of root canal therapy performed by predoctoral students on endodontic outcome and quality of life of patients

This study evaluated the technical quality (TQ) of root canal therapy (RCT) performed by predoctoral students and its impact on endodontic outcome (EO) and patients' quality of life (QoL). The TQ of RCT done by predoctoral students was evaluated and follow-up visits were conducted to determine the clinical, radiographic outcome of RCT and patients' QoL. Frequency distribution, multiple regression, independent-samples t test and one-way anova were performed. A total of 226 teeth of 164 patients were clinically and radiographically examined. A satisfactory TQ was observed in 130 (57.5%), successful clinical outcomes in 155 (68.6%), successful radiographical outcomes in 206 (91%) and overall successful EO in 150 teeth (66.4%) with 80% of patients reporting a favourable QoL. A significant positive correlation was noted between EO and QoL (p = 0.002) with no significant correlation in between TQ-RCT and EO (p = 0.07) and TQ-RCT and QoL (p = 0.316). Successful EO had a positive impact on patients' QoL.

Physicochemical Changes in Root-Canal Sealers under Thermal Challenge: A Comparative Analysis of Calcium Silicate- and Epoxy-Resin-Based Sealers

INTRODUCTION

We compared the effects of heat on the physicochemical properties of recently developed calcium silicate-based sealers (CSBSs), including BioRoot Flow, BioRoot RCS, and AH Plus Bioceramic sealer, with those of the epoxy-resin-based sealer (ERBS) AH Plus.

METHODS

The flow, film thickness, setting time, and solubility of sealers were evaluated at 37 °C and 100 °C using ISO 6876/2012. Furthermore, pH and calcium ion release were evaluated at these temperatures. In addition, the mass change in sealers at a high temperature was assessed via thermogravimetric analysis. Then, the chemical composition and components of the sealers were analyzed using a scanning electron microscope and Fourier-transform infrared spectroscopy (FTIR).

RESULTS

BioRoot Flow, AH Plus Bioceramic, and AH Plus complied with ISO standards in terms of flow and film thickness, both before and after heat application. However, BioRoot RCS exhibited significantly increased film thickness at 100 °C. The setting times of all sealers were significantly reduced at 100 °C. The solubility of CSBS was >3%, exceeding the ISO 6876/2012 standard, both before and after heat exposure. Conversely, the solubility of AH Plus complied with the standard, regardless of the thermal condition. For 4 weeks, CSBS showed a significantly higher pH than AH Plus at both 37 °C and 100 °C. After heat treatment, calcium release decreased in Bioroot RCS and BioRoot Flow, while AH Plus showed no significant differences before and after treatment. However, CSBS consistently exhibited significantly higher calcium release than AH Plus at both temperatures. An FTIR analysis revealed that the chemical composition of the sealers did not change at the high temperature, whereas a thermogravimetric analysis demonstrated a >5% weight reduction in CSBS and a 0.005% weight reduction in AH Plus at 100 °C.

CONCLUSIONS

BioRoot Flow, AH Plus Bioceramic, and AH Plus possess favorable physicochemical properties, which make them suitable for application under thermal conditions. At a high temperature, BioRoot RCS did not exhibit changes in its chemical composition. However, its film thickness was increased, and pH and solubility were reduced. Therefore, caution is needed when it is applied at high temperatures, such as during the warm obturation technique.

Assessment of the quality of root canal fillings performed on extracted teeth by undergraduate dental students in a sample from Saudi Arabia

BACKGROUND

The educational process in the field of endodontics commences with preclinical exercises to enhance students' proficiency in cleaning, shaping, and performing root canal fillings. Therefore, this study aimed to radiographically evaluate the technical quality of root canal fillings performed by preclinical students on extracted teeth at the College of Dentistry, University of Ha'il, Saudi Arabia.

METHODS

A total of 788 extracted human teeth received root canal treatment by undergraduate students. The samples were then gathered and radiographically assessed using the three quality criteria of length, density, and taper. The category of root canal fillings was classified as either acceptable or unacceptable. The criteria for evaluating the acceptability of filling quality were defined based on the presence of adequate length, density, and taper. The effectiveness of root canal fillings was also evaluated in relation to the tooth type, sex, and treatment year. The agreement between the examiners was evaluated using Cohen's kappa test, and the relationship between the research variables was determined using the chi-squared test. The significance threshold was set at 0. 05.

RESULTS

The overall quality of root filling was determined to be satisfactory in 532 (67.5%) of 788 endodontically treated extracted teeth. The majority of the research sample (88.1%) had enough length, 89.6% had adequate density, and 86.4% had acceptable taper. The quality of anterior teeth was substantially better than that of posterior teeth (p < 0.001). Our findings showed that the quality of root canals was better in 2022 than it had been in earlier years (p = 0.001). The three RCT quality criteria differed significantly when compared between sexes (p = 0.002).

CONCLUSIONS

The quality of the root canal fillings completed by undergraduate students was rated as acceptable. The findings of the research suggest that the implementation of routine assessments to evaluate the technical competence of undergraduate dental students performing root canal treatments could provide significant insights into the efficacy of the curriculum requirements.

Assessment of isthmus filling using two obturation techniques performed by students with different levels of clinical experience

Background/purpose

Root canal filling is a necessary skill for dental students and an important aspect of endodontic education. This study aimed to evaluate the effect of students' clinical experiences on isthmus filling using different techniques and sealers.

Materials and methods

One hundred eight three-dimensional-printed resin replicas of isthmus were divided into six groups and either continuous wave of condensation (CWC) or single-cone obturation (SC) was performed. One of three sealers (AH Plus Jet®, GuttaFlow2, iRoot SP) was used together with a size-fitted gutta-percha master cone. All the obturations were completed by students with three different levels of clinical experience including senior postgraduate students (SPS), junior postgraduate students (JPS), and undergraduate students (US). The percentages of filled areas (PFA) at 2, 4, 6, and 8 mm from the apex were analyzed using a light microscope. Data were analyzed using the Mann-Whitney U test or Kruskal-Wallis 1-way ANOVA with Dunn's tests (α = 0.05).

Results

The CWC group exhibited a higher PFA than the SC group (P < 0.05). The PFA was higher in the SPS group than in the JPS group or the US group with CWC (P < 0.05). The three clinical experience groups showed similar PFAs with SC (P > 0.05); however, when using SC with iRoot SP, the PFA was higher than with either of the other two sealers (P < 0.05).

Conclusion

CWC was found to be technique-sensitive and required clinical training. With SC, clinical experience did not improve the quality of isthmus filling without additional training. CWC was superior to SC for type IV isthmuses. When using SC, better filling quality was obtained with a bioceramic sealer.

Quality of Root Canal Fillings Performed by Undergraduate Students and the Related Factors on the Treatment Outcome: A 2- to 5-Year Follow-Up

Objective

To evaluate radiographically the quality of root canal fillings performed by undergraduate students between 2012 and 2015, and to investigate the impact of their quality in correlation with root type, preoperative periapical status, and type of restorative treatment on the treatment outcome.

Methods

Six hundred seventy-seven non-surgical root canal treatments were performed by undergraduate students from the Aristotle University of Thessaloniki at the endodontic department clinics between 2012 and 2015. Two hundred forty-four teeth (349 roots) fulfilled the criteria and were clinically and radiographically re-examined between 2016 and 2017, and the outcome was classified as "success" or "failure." Root canal fillings were radiographically evaluated in terms of apical extension and density. The root filling was classified as acceptable when both parameters were rated as acceptable. Statistical analysis was performed using generalized estimating equations. Pairwise comparisons were performed by the sequential Bonferroni method. Intra-examiner and inter-examiner agreements were checked by the intraclass correlation coefficient and Cohen's kappa. The statistical significance level was set at P<0.05.

Results

The percentage of the roots with acceptable root canal fillings was 40.4%. The molar roots demonstrated the lowest rate (30.7%) compared with the anterior (53%, P<0.05) and premolar teeth (43%, P>0.05). The results of the correlation of the quality of the root canal fillings with the root type, preoperative periapical status, type of coronal restoration, and the treatment outcome showed that the unacceptable quality of root canal filling in relation to root or presence of periapical lesion or crown revealed the lowest success rates (47.2%, 40.3%, and 52.3%, respectively). In contrast, results showed that roots with canal fillings of acceptable quality demonstrated success rates close to 90%, regardless of the other variables.

Conclusion

Within the limitations of the present study, the percentage of radiographically acceptable root canal fillings performed in the undergraduate clinic of the Department of Endodontology at Aristotle University of Thessaloniki was low (40.4%). Results showed that there was a strong association of higher success rates with root fillings of acceptable quality.

Technical quality assessment of root canal treatment performed by preclinical dental students at Taibah University, KSA

Objectives

The aim of this study was to evaluate the technical quality of root canal treatment (RCT) performed by preclinical undergraduate dental students at the Dental College of Taibah University KSA.

Methods

In this study, 259 extracted teeth were treated endodontically by preclinical students of the College of Dentistry, Taibah University, KSA, from 2013 to 2015. The evaluation criteria were root canal obturation length, root canal obturation density (homogeneity), and root canal obturation taper. A specific score (0, 1, or 2) was assigned to each parameter.

Results

Of 259 endodontically extracted teeth, 138 (53.3%) had RCT of unacceptable technical quality, 42 (16.2%) had treatment of slightly acceptable technical quality, 50 (19.3%) had treatment of acceptable technical quality, and 29 (11.2%) teeth had RCT of perfectly acceptable technical quality. There were no significant differences (p > 0.05) in the technical quality of root canal obturation among types of teeth.

Conclusion

The results of this study showed that there were varied levels of technical quality of root canal treatment performed by preclinical undergraduate dental students, and the outcome varied between unacceptable, slightly acceptable, acceptable, and perfectly acceptable. The unacceptable cases were the most common, representing more than half of all cases, and the perfectly acceptable cases were the least common. There is an urgent need to improve the endodontics teaching programmes in the College of Dentistry of Taibah University. This research should be repeated in the future to evaluate improvement in the performance of RCT by undergraduate dental students in Taibah University.