The importance of final rinse after disinfection of gutta-percha and Resilon cones

Clinical usability of vasundhara's transit for gutta-percha (V transit GP) - A questionnaire-based survey

Context

The lack of a suitable armamentarium to aid in the disinfection and handling of gutta-percha (GP) cones during obturation has been a common challenge amongst dentists.

Aims

This study assessed the clinical usability of 'Vasundhara's (V) Transit GP' through a questionnaire-based survey.

Settings and Design

This questionnaire-based study was conducted in Davanagere, Karnataka, in February 2021 for 4 months.

Methods and Material

The design was 3D printed using a heat-resistant polypropylene material and named 'Vasundhara's Transit for Gutta Percha (V Transit GP)'. Eighteen postgraduate students participated in the study. Fourteen cases were done by each student, seven without and seven with the use of 'V Transit GP'. The GP cones, before obturation, were transferred to their respective canal slots containing 5.25% sodium hypochlorite for one minute and then transferred to their respective distilled water slots. The cones were dried with sterile gauze and taken for obturation. At the end of the procedure, a questionnaire was handed out, the responses were recorded, and the results were tabulated and analysed using Statistical Package for the Social Sciences (SPSS) version 22.0 software.

Results

The results showed that without the use of 'V Transit GP', 84.2% of the dentists felt that the disinfection and handling of GP cones were difficult, whereas with the use of 'V Transit GP', 94.2% of the participants found it to be extremely easy.

Conclusions

'V Transit GP' proved to be an extremely efficient and user-friendly equipment for easy handling and disinfection of GP cones during obturation.

Influence of Gutta-Percha Surface on Enterococcus faecalis Initial Adhesion In Vitro: An Atomic Force Microscopy Study

The aim of this study was to evaluate the influence of surface topography of gutta-percha (GP) cones and plasticized disks of GP on the initial adhesion of Enterococcus faecalis (E. faecalis). The GP cones (Tanari and Dentsply brands) were cut 3 mm from the apical portion and fixed on a glass slide. To make the disks, the cones were thermoplasticized in standardized molds. The specimens were divided into groups according to the shape of the GP and the presence or absence of the bacteria. For contamination, the strain of E. faecalis (ATCC 29212) was used. The surface topography was analyzed using an atomic force microscope (AFM). The surface, roughness, and waviness parameters were evaluated by the Kruskal-Wallis and Dunn test. The comparison between disks and cones showed significant differences, where the cones were rougher, with a higher value attributed to the Dentsply cone (DC group). The same was observed for the waviness. After contamination, there was greater bacterial accumulation in cones, especially in their valleys, but both the surface and the topography became more homogeneous and smoother, with no differences between disks and cones of both brands. The topographic surface of the GP, at the micro and nanoscale, influences the initial adhesion of E. faecalis, with a greater tendency for contamination in regions associated with the presence of roughness and waviness. In this context, plasticization of GP is indicated, as it reduces surface irregularities compared to cones, contributing to less retention of bacteria.

Bacterial Contamination of Gutta-Percha Points From Different Brands and the Efficacy of a Chairside Disinfection Protocol

OBJECTIVE

To evaluate the bacterial contamination of different brands of Gutta-Percha (GP) points routinely used in clinical practice and the efficacy of a chairside disinfection protocol with sodium hypochlorite.

METHODS

GP points (n=240), in sizes A, B, C, D, K15, K20, K25, K30, K35, K40, F1, F2, F3 (Dentsply®, Proclinic®, ProTaper® and R&S®), were randomly sampled from commercial packages already in use. These were added directly to Fluid Thioglycolate Medium (one GP point per tube) and incubated at 37ºC for 21 days. During this period, the presence/absence of turbidity was evaluated. To evaluate the efficacy of a chairside disinfection protocol, all detected contaminated GP points were immersed for 1 minute in 10 mL of 5.25% sodium hypochlorite, followed by 5 minutes in 10 mL of detergent solution (3% Tween 80 and 5% sodium thiosulfate) and a final rinse with 10 mL of sterile distilled water and incubated. The data was analysed using the chi-square test and differences between characteristics of dichotomic variables were performed using the binomial test. The significance level was set at P<0.05.

RESULTS

Bacterial growth was observed in 22.9% of the total study samples. Dentsply® and R&S® showed the highest level of contamination, 47.3% each, although without significant differences to the other commercial brands. The most contaminated GP point size was K30 (16.4%). The chairside disinfection protocol was effective in disinfection of 76.4% of GP points (P<0.001).

CONCLUSION

A real small number of GP points in clinical use harboured bacteria, including after the Chairside Disinfection Protocol that, anyway, proved to be effective. No significant difference was observed between tested commercial brands.

Management of Instrument Sterilization Workflow in Endodontics: A Systematic Review and Meta-Analysis

Endodontic treatment consists of different working procedures, such as the isolation of the operating field, pulp chamber access, and cleaning and shaping phases with at last the need of a three-dimensional filling of the canals. Each step requires a series of single-use or sterilizable instruments. We have performed a systematic review of different sterilization and disinfection procedures aiming at drawing up a disinfection and sterilization procedure to be used on endodontic instruments. A search on PubMed and Scopus was carried out using the following keywords: “endodontic sterilization,” “endodontic autoclave,” “decontamination dental bur,” “sterilization dental burs,” and “gutta-percha points sterilization.” Eligible articles were included in the qualitative and quantitative analysis. Results of the meta-analysis showed that the most effective method in sterilization is autoclaving. The qualitative analysis showed that the use of single-use or first-use instruments requires presterilization or sterilization procedures, and for reusable tools, attention must be paid to the removal of debris deposited on the blades, not easy to remove manually.

Disinfection and surface changes of gutta-percha cones after immersion in sodium hypochlorite solution containing surfactant

In this study, we evaluated the effectiveness of 1 and 5.25% NaOCl solutions, with or without surfactant, in disinfecting gutta-percha cones. Surface changes of the gutta-percha cones after disinfection were also assessed under scanning electron microscopy (SEM). One-hundred and eight gutta-percha cones previously contaminated with Enterococcus faecalis were left in contact for 30 s or 1 min with the following solutions (n = 12): 1% NaOCl; 1% NaOCl + 2% cetrimide; 5.25% NaOCl; 5.25% NaOCl + 2% cetrimide. Positive control group was composed by the remaining contaminated cones (n = 12), and the negative control group by noncontaminated cones (n = 12). The cones were kept in Eppendorf tubes containing Trypticase Soy Broth at 37°C for 24 hr, and then, the presence of turbidity was analyzed. Ten additional cones (n = 2) were observed under SEM to evaluate surface changes after 1 min of disinfection. The data analysis (Kruskal-Wallis test, α = 5%) demonstrated that regardless the presence of surfactant, the NaOCl solutions used were effective in the disinfection when cones were immersed for 1 min. However, at the 30-s period, only the 5.25% NaOCl solution was effective. SEM analysis demonstrated that NaOCl solutions promoted the formation of sodium chloride crystals on cones surface, less visible when the 1% NaOCl associated to surfactant was used. The addition of surfactant did not affect the disinfection capacity of NaOCl solutions. However, the surfactant has apparently inhibited the sodium chloride crystals deposition on the cones surface when associated to 1% NaOCl solution.

Antimicrobial effect of three disinfecting agents on Resilon cones and their effect on surface topography: An in vitro study

Aim:

The objective of this study was to evaluate the effectiveness of 5.25% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX), and 2% peracetic acid (PAA) in disinfecting Resilon cones and to evaluate topographical changes microscopically under scanning electron microscope (SEM) after rapid chemical disinfection.

Materials and Methods:

Resilon cones were disinfected in an ultraviolet (UV) light chamber for 20 min and contaminated by immersing in a microbial suspension of Enterococcus faecalis for 30 min. The contaminated cones were then immersed in the 5.25% NaOCl, 2% CHX, and 2% PAA for 1 min, 5 min, and 10 min, separately. The cones were then incubated at 37°C in thioglycollate broth for 7 days and examined for turbidity. The samples showing turbidity were subcultured on blood agar and incubated at 37°C for 48 h. Gram staining was done to confirm that the cultured bacteria were E. faecalis. Surface changes of disinfected Resilon cones were evaluated under SEM.

Statistical Analysis Used:

The data were analyzed statistically using Kruskal-Wallis, analysis of variance (ANOVA), and Mann–Whitney U-test.

Result:

In eliminating E. faecalis, 5.25% NaOCl was most effective followed by 2% PAA and 2% CHX. Topographic examination of tested Resilon cones revealed some surface deposits after disinfection with 5.25% NaOCl and 2% CHX, whereas 2% PAA caused surface erosion.

Conclusion:

In disinfecting Resilon cones, 5.25% NaOCl is most effective followed by 2% PAA and 2% CHX.

Assessment of the Potential of CFC (Calcium hydroxide Flagyl Ciprofloxacin) for the Rapid Disinfection of Resilon and Gutta-Percha

INTRODUCTION

Obturating materials exposed to the dental operating environment has been shown to be contaminated, making rapid chair side disinfection mandatory to ensure the sterility of the root canals.

OBJECTIVE

The purpose of this study was to investigate the effectiveness of CFC (combination of Calcium hydroxide, Flagyl and Ciprofloxacin) for the rapid disinfection of Gutta-percha and Resilon cones.

MATERIALS AND METHODS

Seventy new Gutta-percha and Resilon cones were randomly selected, contaminated with Enterococcus faecalis and divided into 4 group according to the irrigant used for disinfection {Group I: 5.25% Sodium Hypochlorite (NaOCl), Group II: MTAD, Group III: 2% Chlorhexidine (CHX), Group IV: CFC (a combination of Calcium hydroxide, Flagyl and Ciprofloxacin)}. All the samples were placed in a centrifuge tube with BHI broth after being washed with sterile water. The samples were then incubated for 7 days at 37(o)C. Samples were randomly plated on Mac Conkey agar plate and the colony count was recorded and the observations were drawn.

RESULTS

A 5.25% NaOCl required 1 minute exposure for effective disinfection of all the samples. MTAD could eliminate E.faecalis from gutta-percha samples in 30 seconds whereas it required 1 minute of exposure for Resilon cones. Both 2% CHX and CFC could not disinfect the samples with 1 minute exposure and a minimum of 5 minute exposure was required.

CONCLUSION

A 5.25% NaOCl and Biopure MTAD required less chair side time to disinfect all the samples effectively when compared with 2% CHX and CFC.

Disinfection of gutta-percha cones using three reagents and their residual effects

Aims and Objectives:

The purpose of this study was to compare the efficacy of 5.25% sodium hypochlorite, 2% chlorehexidine and MTAD in disinfecting gutta-percha cones and to analyze the surface topography of gutta-percha cones after the rapid chemical disinfection procedure.

Materials and Methods:

Gutta-percha cones were immersed in suspensions of Enterococcus faecalis and Staphylococcus aureus separately. The cones were then immersed in 5.25% NaOCl, 2% CHX and MTAD for 30 seconds, 1 minute and 5 minutes separately. The disinfected cones were then incubated in thioglycollate media for 7 days. The thioglycolate media was sub-cultured and colony forming units were counted. For topographical examination of gutta-percha cones, the cones were immersed in respective solutions for one minute and allowed to air dry for 30 minutes after rinsing or without rinsing the cones with distilled water. The topography of the cones were then analyzed under SEM. Data was statistically analyzed using one way anova.

Results:

MTAD was found to be the most effective disinfecting solution. The topographical examination of GP cones found some deposits after the disinfection procedure in every group. These deposits were removed when the GP cones were rinsed with distilled water.

Conclusions:

MTAD possesses superior bactericidal activity when compared with NaOCl and CHX and a final rinse with distilled water is essential after the disinfection procedure.

A comparative evaluation of the effect of 5.25% sodium hypochlorite and 2% chlorhexidine on the surface texture of Gutta-percha and resilon cones using atomic force microscope

Aims & Objectives:

The purpose of this study was to investigate the effects of 5.25% sodium hypochlorite (NaOCl) and 2% chlorhexidine (CHX) on Gutta-percha and Resilon cones using an atomic force microscope (AFM).

Materials and Methods:

Gutta-percha cones (n = 15) and Resilon cones (n = 15) were cut 3 mm from their tip, attached to a glass slide with cyanoacrylate glue and immersed in 5.25% NaOCl and CHX for 1, 5, 10, 20 and 30 min. Five each of Gutta-percha and Resilon cones not treated with any disinfectant were used as control. The analysis of the surface topography was performed on the region between 1 and 2 mm from the tip using the AFM. The root mean square (RMS) parameters for contact mode imaging were measured. The differences between RMS values were tested by SPSS-16.0 version statistical software [IBM SPSS (Statistical Product and Service Solutions) Data Software, Chicago, US] using Kruskal-Wallis ANOVA, Mann-Whitney U-test and Wilcoxon matched pairs test.

Results:

There was no deterioration in the surfac e topography of Gutta-percha and Resilon when treated with 2% CHX in comparison to baseline (P < 0.05). Resilon exhibited no deterioration in topography when immersed in 5.25% NaOCl. There was a significant decrease in the mean RMS values of Gutta-percha treated with NaOCl from the control at time intervals of 1, 5, 10, 20 and 30 min.

Resilon: a comprehensive literature review

Background and aims. An ideal root canal filling material should completely seal the entire root canal space and block communication between the root canal system and its surrounding tissues; it should also be nontoxic, noncarcinogenic, non-genotoxic, biocompatible, insoluble in tissue fluids and dimensionally stable. Bonding to dentin is a promising property, which can prevent leakage and improve the sealing ability of root canal filling materials. Resilon was developed and rec-ommended initially because the existing rootcanal filling materials did not bond to root canal dentin. Since its introduction in 2004, numerous reports have been published regarding various aspects of this material. The aim of this literature review is to present investigations regarding Resilon's physical and chemical properties and leakage studies. Materials and methods. A review of the literature was performed by using electronic and hand searching methods for Resilon from May 2004 to April 2012. Results. There are many published reports regarding Resilon. The searchshowed that Resilon is composed of a parent polymer, polycaprolactone or Tone, which is a biodegradable aliphatic polyester, with filler particles consisting of bioactive glass, bismuth oxychloride and barium sulfate. It possesses some antibacterial and antifungal properties. It is a promising material for root canal filling. Despite the presence of numerous case reports and case series regarding these applications, there are few designed research studies on clinical applications of this material. Resilon has some drawbacks such as high cost. Conclusion. Resilon seals well and is a biocompatible material. However, more clinical studies are needed to confirm its efficacy compared with other materials.

Chlorhexidine in Endodontics

Chemical auxiliary substances (CAS) are essential for a successful disinfection and cleanness of the root canals, being used during the instrumentation and if necessary, as antimicrobial intracanal medicaments. Different CAS have been proposed and used, among which sodium hypochlorite (NaOCl), chlorhexidine (CHX), 17% EDTA, citric acid, MTAD and 37% phosphoric acid solution. CHX has been used in Endodontics as an irrigating substance or intracanal medicament, as it possesses a wide range of antimicrobial activity, substantivity (residual antimicrobial activity), lower cytotoxicity than NaOCl whilst demonstrating efficient clinical performance, lubricating properties, rheological action (present in the gel presentation, keeping the debris in suspension); it inhibits metalloproteinase, is chemically stable, does not stain cloths, it is odorless, water soluble, among other properties. CHX has been recommended as an alternative to NaOCl, especially in cases of open apex, root resorption, foramen enlargement and root perforation, due to its biocompatibility, or in cases of allergy related to bleaching solutions. The aim of this paper is to review CHX's general use in the medical field and in dentistry; its chemical structure, presentation form and storage; mechanism of action; antimicrobial activity including substantivity, effects on biofilms and endotoxins, effects on coronal and apical microbial microleakage; tissue dissolution ability; interaction with endodontic irrigants; effects on dentin bonding, metalloproteinases and collagen fibrils; its use as intracanal medicament and diffusion into the dentinal tubules; its use as disinfectant agent of obturation cones; other uses in the endodontic therapy; and possible adverse effects, cytotoxicity and genotoxicity.