Atmospheric scanning electron microscope system with an open sample chamber: Configuration and applications

Microfluidic Liquid Cell with Silicon Nitride Super-Thin Membrane for Electron Microscopy of Samples in Liquid

Microfluidic liquid cells have been developed to visualize nanoscaled biological samples in liquid using a scanning electron microscope (SEM) through an electron-transparent membrane (ETM). However, despite the combination of the high-resolution visualization of SEM and the high experimental capability of microfluidics, the image is unclear because of the scattering of the electron beam in the ETM. Thus, this study developed a microfluidic liquid cell with a super-thin ETM of thickness 10 nm. Because the super-thin ETM is excessively fragile, the bonding of a silicon-nitride-deposited substrate and a polydimethylsiloxane microchannel before silicon anisotropic etching was proposed prevented the super-thin ETM from damage and breakage due to etching. With this protection against etchant using the microchannel, the yield of the fabricated super-thin ETM increased from 0 to 87%. Further, the scattering of the electron beam was suppressed using a microfluidic liquid cell with a super-thin ETM, resulting in high-resolution visualization. In addition, T4 bacteriophages were visualized using a super-thin ETM in vacuum. Furthermore, the cyanobacterium Synechocystis sp. PCC6803 in liquid was visualized using a super-thin ETM, and sub-microscopic structures on the surface were observed.

Addressable graphene encapsulation of wet specimens on a chip for optical, electron, infrared and X-ray based spectromicroscopy studies

Label-free spectromicroscopy methods offer the capability to examine complex cellular phenomena. Electron and X-ray based spectromicroscopy methods, though powerful, have been hard to implement with hydrated objects due to the vacuum incompatibility of the samples and due to the parasitic signals from (or drastic attenuation by) the liquid matrix surrounding the biological object of interest. Similarly, for many techniques that operate at ambient pressure, such as Fourier transform infrared spectromicroscopy (FTIRM), the aqueous environment imposes severe limitations due to the strong absorption of liquid water in the infrared regime. Here we propose a microfabricated multi-compartmental and reusable hydrated sample platform suitable for use with several analytical techniques, which employs the conformal encapsulation of biological specimens by a few layers of atomically thin graphene. Such an electron, X-ray, and infrared transparent, molecularly impermeable and mechanically robust enclosure preserves the hydrated environment around the object for a sufficient time to allow in situ examination of hydrated bio-objects with techniques operating under both ambient and high vacuum conditions. An additional hydration source, provided by hydrogel pads lithographically patterned in the liquid state near/around the specimen and co-encapsulated, has been added to further extend the hydration lifetime. Note that the in-liquid lithographic electron beam-induced gelation procedure allows for addressable capture and immobilization of the biological cells from the solution. Scanning electron microscopy and optical fluorescence microscopy, as well as synchrotron radiation based FTIR and X-ray fluorescence microscopy, have been used to test the applicability of the platform and for its validation with yeast, A549 human carcinoma lung cells and micropatterned gels as biological object phantoms.

Liquid-phase ASEM imaging of cellular and structural details in cartilage and bone formed during endochondral ossification: Keap1-deficient osteomalacia

Chondrogenesis and angiogenesis drive endochondral ossification. Using the atmospheric scanning electron microscopy (ASEM) without decalcification and dehydration, we directly imaged angiogenesis-driven ossification at different developmental stages shortly after aldehyde fixation, using aqueous radical scavenger glucose solution to preserve water-rich structures. An embryonic day 15.5 mouse femur was fixed and stained with phosphotungstic acid (PTA), and blood vessel penetration into the hypertrophic chondrocyte zone was visualised. We observed a novel envelope between the perichondrium and proliferating chondrocytes, which was lined with spindle-shaped cells that could be borderline chondrocytes. At postnatal day (P)1, trabecular and cortical bone mineralisation was imaged without staining. Additional PTA staining visualised surrounding soft tissues; filamentous connections between osteoblast-like cells and osteocytes in cortical bone were interpreted as the osteocytic lacunar-canalicular system. By P10, resorption pits had formed on the tibial trabecular bone surface. The applicability of ASEM for pathological analysis was addressed using knockout mice of Keap1, an oxidative-stress sensor. In Keap1-/- femurs, we observed impaired calcification and angiogenesis of epiphyseal cartilage, suggesting impaired bone development. Overall, the quick ASEM method we developed revealed mineralisation and new structures in wet bone tissue at EM resolution and can be used to study mineralisation-associated phenomena of any hydrated tissue.

Microscopy Methods for Biofilm Imaging: Focus on SEM and VP-SEM Pros and Cons

Simple Summary

Bacterial biofilms cause infections that are often resistant to antibiotic treatments. Research about the formation and elimination of biofilms cannot be undertaken without detailed imaging techniques. In this review, traditional and cutting-edge microscopy methods to study biofilm structure, ultrastructure, and 3-D architecture, with particular emphasis on conventional scanning electron microscopy and variable pressure scanning electron microscopy, are addressed, with the respective advantages and disadvantages. When ultrastructural characterization of biofilm matrix and its embedded bacterial cells is needed, as in studies on the effects of drug treatments on biofilm, scanning electron microscopy with customized protocols such as the osmium tetroxide (OsO₄), ruthenium red (RR), tannic acid (TA), and ionic liquid (IL) must be preferred over other methods for the following: unparalleled image quality, magnification and resolution, minimal sample loss, and actual sample structure preservation. The first step to make a morphological assessment of the effect of the various pharmacological treatments on clinical biofilms is the production of images that faithfully reflect the structure of the sample. The extraction of quantitative parameters from images, possible using specific software, will allow for the scanning electron microscopy morphological evaluation to no longer be considered as an accessory technique, but a quantitative method to all effects.

Abstract

Several imaging methodologies have been used in biofilm studies, contributing to deepening the knowledge on their structure. This review illustrates the most widely used microscopy techniques in biofilm investigations, focusing on traditional and innovative scanning electron microscopy techniques such as scanning electron microscopy (SEM), variable pressure SEM (VP-SEM), environmental SEM (ESEM), and the more recent ambiental SEM (ASEM), ending with the cutting edge Cryo-SEM and focused ion beam SEM (FIB SEM), highlighting the pros and cons of several methods with particular emphasis on conventional SEM and VP-SEM. As each technique has its own advantages and disadvantages, the choice of the most appropriate method must be done carefully, based on the specific aim of the study. The evaluation of the drug effects on biofilm requires imaging methods that show the most detailed ultrastructural features of the biofilm. In this kind of research, the use of scanning electron microscopy with customized protocols such as osmium tetroxide (OsO₄), ruthenium red (RR), tannic acid (TA) staining, and ionic liquid (IL) treatment is unrivalled for its image quality, magnification, resolution, minimal sample loss, and actual sample structure preservation. The combined use of innovative SEM protocols and 3-D image analysis software will allow for quantitative data from SEM images to be extracted; in this way, data from images of samples that have undergone different antibiofilm treatments can be compared.

Comparative effect of osmium tetroxide and ruthenium tetroxide on Lacazia loboi ultrastructure

Lobomycosis is a skin infection produced by the fungus Lacazia loboi, which mainly affects some indigenous and afro-descendant populations in Tropical America. We previously reported the comparative effect of osmium tetroxide (OsO₄ ) and ruthenium tetroxide (RuO₄ ) in the electron microscopy (EM) of other related microorganisms. The objective of this study is to compare the effect of postfixation with OsO₄ and RuO₄ in the ultrastructure of L. loboi yeasts. Skin biopsies on patients diagnosed with lobomycosis were fixed in glutaraldehyde at 3% and postfixed in the following solutions: (a) 1% OsO₄ , (b) 0.2% RuO₄ , and (c) OsO₄ at 1% followed by RuO₄ at 0.2%. They were then processed using the conventional method for EM. Unlike OsO_4, the treatment with RuO₄ revealed different shades of gray and electron dense bands in the cell wall and other cell components of L. loboi. The most notable finding was the presence of radial filamentous structures around the yeast, which made the image look like the sun. Postfixation with RuO₄ revealed ultrastructural details that had not been previously reported for L loboi. The combined use of OsO₄ and RuO₄ in EM of microorganisms with cell walls can be useful to evaluate the effect of microbicide substances.

Pyrene Excimer-Based Fluorescent Labeling of Cysteines Brought into Close Proximity by Protein Dynamics: ASEM-Induced Thiol-Ene Click Reaction for High Spatial Resolution CLEM

Fluorescence microscopy (FM) has revealed vital molecular mechanisms of life. Mainly, molecules labeled by fluorescent probes are imaged. However, the diversity of labeling probes and their functions remain limited. We synthesized a pyrene-based fluorescent probe targeting SH groups, which are important for protein folding and oxidative stress sensing in cells. The labeling achieved employs thiol-ene click reactions between the probes and SH groups and is triggered by irradiation by UV light or an electron beam. When two tagged pyrene groups were close enough to be excited as a dimer (excimer), they showed red-shifted fluorescence; theoretically, the proximity of two SH residues within ~30 Å can thus be monitored. Moreover, correlative light/electron microscopy (CLEM) was achieved using our atmospheric scanning electron microscope (ASEM); radicals formed in liquid by the electron beam caused the thiol-ene click reactions, and excimer fluorescence of the labeled proteins in cells and tissues was visualized by FM. Since the fluorescent labeling is induced by a narrow electron beam, high spatial resolution labeling is expected. The method can be widely applied to biological fields, for example, to study protein dynamics with or without cysteine mutagenesis, and to beam-induced micro-fabrication and the precise post-modification of materials.

Testing Anti-Biofilm Polymeric Surfaces: Where to Start?

Present day awareness of biofilm colonization on polymeric surfaces has prompted the scientific community to develop an ever-increasing number of new materials with anti-biofilm features. However, compared to the large amount of work put into discovering potent biofilm inhibitors, only a small number of papers deal with their validation, a critical step in the translation of research into practical applications. This is due to the lack of standardized testing methods and/or of well-controlled in vivo studies that show biofilm prevention on polymeric surfaces; furthermore, there has been little correlation with the reduced incidence of material deterioration. Here an overview of the most common methods for studying biofilms and for testing the anti-biofilm properties of new surfaces is provided.

Calcium phosphate mineralization in bone tissues directly observed in aqueous liquid by atmospheric SEM (ASEM) without staining: microfluidics crystallization chamber and immuno-EM

The malformation and disordered remodeling of bones induce various diseases, including osteoporosis. We have developed atmospheric SEM (ASEM) to directly observe aldehyde-fixed bone tissue immersed in radical scavenger buffer without thin sectioning. The short procedure realized the observation of bone mineralization surrounded by many cells and matrices in natural aqueous buffer, decreasing the risk of changes. In osteoblast primary cultures, mineralization was visible without staining. Correlative energy dispersive X-ray spectrometry indicated the formation of calcium phosphate mineral. Fixed bone was sectioned, and the section surface was inspected by ASEM. Mineralized trabeculae of talus spongy bone were directly visible. Associated large and small cells were revealed by phosphotungstic acid staining, suggesting remodeling by bone-absorbing osteoclasts and bone-rebuilding osteoblasts. In tibia, cortical bone layer including dense grains, was bordered by many cells with protrusions. Tissue immuno-EM performed in solution for the first time and anti-cathepsin-K antibody, successfully identified osteoclasts in femur spongy bone. A microfluidics chamber fabricated on the silicon nitride film window of an ASEM dish allowed mineralization to be monitored in vitro; calcium phosphate crystals as small as 50 nm were imaged. ASEM is expected to be widely applied to study bio-mineralization and bone-remodeling, and to help diagnose bone-related diseases.

The Composition and Structure of Biofilms Developed by Propionibacterium acnes Isolated from Cardiac Pacemaker Devices

The present study aimed to understand the biofilm formation mechanism of Propionibacterium acnes by analyzing the components and structure of the biofilms. P. acnes strains were isolated from the surface of explanted cardiac pacemaker devices that exhibited no clinical signs of infection. Culture tests using a simple stamp culture method (pressing pacemakers against the surface of agar plates) revealed frequent P. acnes colonization on the surface of cardiac pacemaker devices. P. acnes was isolated from 7/31 devices, and the isolates were categorized by multilocus sequence typing into five different sequence types (STs): ST4 (JK18.2), ST53 (JK17.1), ST69 (JK12.2 and JK13.1), ST124 (JK5.3), ST125 (JK6.2), and unknown ST (JK19.3). An in vitro biofilm formation assay using microtiter plates demonstrated that 5/7 isolates formed biofilms. Inhibitory effects of DNase I and proteinase K on biofilm formation varied among isolates. In contrast, dispersin B showed no inhibitory activity against all isolates. Three-dimensional live/dead imaging of P. acnes biofilms with different biochemical properties using confocal laser microscopy demonstrated different distributions and proportions of living and dead cells. Additionally, it was suggested that extracellular DNA (eDNA) plays a role in the formation of biofilms containing living cells. Ultrastructural analysis of P. acnes biofilms using a transmission electron microscope and atmospheric scanning electron microscope revealed leakage of cytoplasmic components along with cell lysis and fibrous structures of eDNA connecting cells. In conclusion, the biochemical properties and structures of the biofilms differed among P. acnes isolates. These findings may provide clues for establishing countermeasures against biofilm-associated infection by P. acnes.

Correlative light-electron microscopy in liquid using an inverted SEM (ASEM)

In atmospheric scanning electron microscope (ASEM), the inverted scanning electron microscope (SEM) observes the wet sample from below, while an optical microscope observes it from above simultaneously. The ASEM sample holder has a disposable dish shape with a silicon nitride film window at the bottom. It can be coated variously for the primary-culture of substrate-sensitive cells; primary cells were cultured in a few milliliters of culture medium in a stable incubator environment. For the inverted SEM observation, cells and the excised tissue blocks were aldehyde-fixed, immersed in radical scavenger solution, and observed at minimum electron dose. Neural networking, axonal segmentation, proplatelet-formation and phagocytosis, and Fas expression in embryonic stem cells were captured by optical or fluorescence microscopy, and imaged at high resolution by gold-labeled immuno-ASEM with/without metal staining. By exploiting optical microscopy, the region of interest of organ can be found from the wide area, and the cells and organelle were successfully examined at high resolution by the following scanning electron microscopy. We successfully visualized islet of Langerhans, blood microvessels, neuronal endplate, and bacterial flora on stomach epidermal surfaces. Bacterial biofilms and the typical structural features including "leg complex" of mycoplasma were visualized by exploiting CLEM of ASEM. Based on these studies, ASEM correlative microscopy promises to allow the research of various mesoscopic-scale biological phenomena in the near future.

Correlative Light Electron Microscopy: Connecting Synaptic Structure and Function

Many core paradigms of contemporary neuroscience are based on information obtained by electron or light microscopy. Intriguingly, these two imaging techniques are often viewed as complementary, yet separate entities. Recent technological advancements in microscopy techniques, labeling tools, and fixation or preparation procedures have fueled the development of a series of hybrid approaches that allow correlating functional fluorescence microscopy data and ultrastructural information from electron micrographs from a singular biological event. As correlative light electron microscopy (CLEM) approaches become increasingly accessible, long-standing neurobiological questions regarding structure-function relation are being revisited. In this review, we will survey what developments in electron and light microscopy have spurred the advent of correlative approaches, highlight the most relevant CLEM techniques that are currently available, and discuss its potential and limitations with respect to neuronal and synapse-specific applications.

Imaging of bacterial multicellular behaviour in biofilms in liquid by atmospheric scanning electron microscopy

Biofilms are complex communities of microbes that attach to biotic or abiotic surfaces causing chronic infectious diseases. Within a biofilm, microbes are embedded in a self-produced soft extracellular matrix (ECM), which protects them from the host immune system and antibiotics. The nanoscale visualisation of delicate biofilms in liquid is challenging. Here, we develop atmospheric scanning electron microscopy (ASEM) to visualise Gram-positive and -negative bacterial biofilms immersed in aqueous solution. Biofilms cultured on electron-transparent film were directly imaged from below using the inverted SEM, allowing the formation of the region near the substrate to be studied at high resolution. We visualised intercellular nanostructures and the exocytosis of membrane vesicles, and linked the latter to the trafficking of cargos, including cytoplasmic proteins and the toxins hemolysin and coagulase. A thick dendritic nanotube network was observed between microbes, suggesting multicellular communication in biofilms. A universal immuno-labelling system was developed for biofilms and tested on various examples, including S. aureus biofilms. In the ECM, fine DNA and protein networks were visualised and the precise distribution of protein complexes was determined (e.g., straight curli, flagella, and excreted cytoplasmic molecular chaperones). Our observations provide structural insights into bacteria-substratum interactions, biofilm development and the internal microbe community.

Stochastic Micro-Pattern for Automated Correlative Fluorescence - Scanning Electron Microscopy

Studies of cellular surface features gain from correlative approaches, where live cell information acquired by fluorescence light microscopy is complemented by ultrastructural information from scanning electron micrographs. Current approaches to spatially align fluorescence images with scanning electron micrographs are technically challenging and often cost or time-intensive. Relying exclusively on open-source software and equipment available in a standard lab, we have developed a method for rapid, software-assisted alignment of fluorescence images with the corresponding scanning electron micrographs via a stochastic gold micro-pattern. Here, we provide detailed instructions for micro-pattern production and image processing, troubleshooting for critical intermediate steps, and examples of membrane ultra-structures aligned with the fluorescence signal of proteins enriched at such sites. Together, the presented method for correlative fluorescence – scanning electron microscopy is versatile, robust and easily integrated into existing workflows, permitting image alignment with accuracy comparable to existing approaches with negligible investment of time or capital.

Correlated light and electron microscopy: ultrastructure lights up!

Microscopy has gone hand in hand with the study of living systems since van Leeuwenhoek observed living microorganisms and cells in 1674 using his light microscope. A spectrum of dyes and probes now enable the localization of molecules of interest within living cells by fluorescence microscopy. With electron microscopy (EM), cellular ultrastructure has been revealed. Bridging these two modalities, correlated light microscopy and EM (CLEM) opens new avenues. Studies of protein dynamics with fluorescent proteins (FPs), which leave the investigator 'in the dark' concerning cellular context, can be followed by EM examination. Rare events can be preselected at the light microscopy level before EM analysis. Ongoing development-including of dedicated probes, integrated microscopes, large-scale and three-dimensional EM and super-resolution fluorescence microscopy-now paves the way for broad CLEM implementation in biology.

Observation of tissues in open aqueous solution by atmospheric scanning electron microscopy: applicability to intraoperative cancer diagnosis

In the atmospheric scanning electron microscope (ASEM), a 2- to 3-μm layer of the sample resting on a silicon nitride-film window in the base of an open sample dish is imaged, in liquid, at atmospheric pressure, from below by an inverted SEM. Thus, the time-consuming pretreatments generally required for biological samples to withstand the vacuum of a standard electron microscope are avoided. In the present study, various mouse tissues (brain, spinal cord, muscle, heart, lung, liver, kidney, spleen and stomach) were fixed, stained with heavy metals, and visualized in radical scavenger D-glucose solution using the ASEM. While some stains made the nuclei of cells very prominent (platinum-blue, phosphotungstic acid), others also emphasized cell organelles and membranous structures (uranium acetate or the NCMIR method). Notably, symbiotic bacteria were sometimes observed on stomach mucosa. Furthermore, kidney tissue could be stained and successfully imaged in <30 min. Lung and spinal cord tissue from normal mice and mice metastasized with breast cancer cells was also examined. Cancer cells present in lung alveoli and in parts of the spine tissue clearly had larger nuclei than normal cells. The results indicate that the ASEM has the potential to accelerate intraoperative cancer diagnosis, the diagnosis of kidney diseases and pathogen detection. Importantly, in the course of the present study it was possible to increase the observable tissue area by using a new multi-windowed ASEM sample dish and sliding the tissue across its eight windows.

Customized patterned substrates for highly versatile correlative light-scanning electron microscopy

Correlative light electron microscopy (CLEM) combines the advantages of light and electron microscopy, thus making it possible to follow dynamic events in living cells at nanometre resolution. Various CLEM approaches and devices have been developed, each of which has its own advantages and technical challenges. We here describe our customized patterned glass substrates, which improve the feasibility of correlative fluorescence/confocal and scanning electron microscopy.