Three dimensional mapping of Fe dopants in ceria nanocrystals using direct spectroscopic electron tomography

Imaging 3D chemistry at 1 nm resolution with fused multi-modal electron tomography

Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment is completed. Even larger doses are required to achieve high resolution. Thus, chemical mapping in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one-nanometer resolution in an Au-Fe3O4 metamaterial within an organic ligand matrix, Co3O4-Mn3O4 core-shell nanocrystals, and ZnS-Cu0.64S0.36 nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX/EELS) signals. We thus demonstrate that sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials.

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO2 Hydrogenation

The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce4+ surface sites to Ce3+ and the formation of oxygen vacancies are critical for CO2 hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO2 by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce3+ site formation and enhancement of the overall catalytic performance.

Multimode Electron Tomography Sheds Light on Synthesis, Structure, and Properties of Complex Metal-Based Nanoparticles

Electron tomography has become a cornerstone technique for the visualization of nanoparticle morphology in three dimensions. However, to obtain in-depth information about a nanoparticle beyond surface faceting and morphology, different electron microscopy signals must be combined. The most notable examples of these combined signals include annular dark-field scanning transmission electron microscopy (ADF-STEM) with different collection angles and the combination of ADF-STEM with energy-dispersive X-ray or electron energy loss spectroscopies. Here, the experimental and computational development of various multimode tomography techniques in connection to the fundamental materials science challenges that multimode tomography has been instrumental to overcoming are summarized. Although the techniques can be applied to a wide variety of compositions, the study is restricted to metal and metal oxide nanoparticles for the sake of simplicity. Current challenges and future directions of multimode tomography are additionally discussed.

Structure of Manganese Oxide Nanoparticles Extracted via Pair Distribution Functions

The structure of nanoparticles has been difficult to determine accurately because the traditional structure methods rely on large monocrystals. Here, we discuss the structure of nanoparticles based on real-space modeling of the pair distribution function obtained by a Fourier transformation of the high-energy X-ray scattering structure factor. In particular, we consider X-ray scattering data taken from colloidal manganese oxide nanoparticles used in Lithium-ion batteries, air-purification, and biomedical systems, which are known to exist in various nanometer-sized polymorphs. Insight is thus obtained into characterizing the structural relaxation of the MnO6 octahedra, which are the key building blocks of oxide nanoparticles, important in many technologies.

Electron Tomography: A Unique Tool Solving Intricate Hollow Nanostructures

Innovations in nanofabrication have expedited advances in hollow-structured nanomaterials with increasing complexity, which, at the same time, set challenges for the precise determination of their intriguing and complicated 3D configurations. Conventional transmission electron microscopy (TEM) analysis typically yields 2D projections of 3D objects, which in some cases is insufficient to reflect the genuine architectures of these 3D nano-objects, providing misleading information. Advanced analytical approaches such as focused ion beam (FIB) and ultramicrotomy enable the real slicing of nanomaterials, realizing the direct observation of inner structures but with limited spatial discrimination. Electron tomography (ET) is a technique that retrieves spatial information from a series of 2D electron projections at different tilt angles. As a unique and powerful tool kit, this technique has experienced great advances in its application in materials science, resolving the intricate 3D nanostructures. Here, the exceptional capability of the ET technique in the structural, chemical, and quantitative analysis of hollow-structured nanomaterials is discussed in detail. The distinct information derived from ET analysis is highlighted and compared with conventional analysis methods. Along with the advances in microscopy technologies, the state-of-the-art ET technique offers great opportunities and promise in the development of hollow nanomaterials.

Chemistry of Shape-Controlled Iron Oxide Nanocrystal Formation

Herein, we demonstrate that meticulous and in-depth analysis of the reaction mechanisms of nanoparticle formation is rewarded by full control of the size, shape, and crystal structure of superparamagnetic iron oxide nanocrystals during synthesis. Starting from two iron sources, iron(II) and iron(III) carbonate, a strict separation of oleate formation from the generation of reactive pyrolysis products and concomitant nucleation of iron oxide nanoparticles was achieved. This protocol enabled us to analyze each step of nanoparticle formation independently in depth. The progress of the entire reaction was monitored via matrix-assisted laser desorption ionization time-of-flight mass spectrometry and gas chromatography, thus providing insight into the formation of various iron oleate species prior to nucleation. Interestingly, due to the intrinsic strongly reductive pyrolysis conditions of the oleate intermediates and redox process in early stages of the synthesis, pristine iron oxide nuclei were composed exclusively from wüstite irrespective of the oxidation state of the iron source. Controlling the reaction conditions provided a very broad range of size- and shape-defined monodispersed iron oxide nanoparticles. Curiously, after nucleation, star-shaped nanocrystals were obtained that underwent metamorphism toward cubic-shaped particles. Electron energy loss spectroscopy tomography revealed ex post oxidation of the primary wustite nanocrystal, providing a full 3D image of Fe²⁺ and Fe³⁺ distribution within. Overall, we developed a highly flexible synthesis, yielding multi-gram amounts of well-defined iron oxide nanocrystals of different sizes and morphologies.

Recent advances in the rational synthesis and self-assembly of anisotropic plasmonic nanoparticles

The field of plasmonics has grown at an incredible pace in the last couple of decades, and the synthesis and self-assembly of anisotropic plasmonic materials remains highly dynamic. The engineering of nanoparticle optical and electronic properties has resulted in important consequences for several scientific fields, including energy, medicine, biosensing, and electronics. However, the full potential of plasmonics has not yet been realized due to crucial challenges that remain in the field. In particular, the development of nanoparticles with new plasmonic properties and surface chemistries could enable the rational design of more complex architectures capable of performing advanced functions, like cascade reactions, energy conversion, or signal transduction. The scope of this short review is to highlight the most recent developments in the synthesis and self-assembly of anisotropic metal nanoparticles, which are capable of bringing forward the next generation of plasmonic materials.

Multimode Electron Tomography as a Tool to Characterize the Internal Structure and Morphology of Gold Nanoparticles

Three dimensional (3D) characterization of structural defects in nanoparticles by transmission electron microscopy is far from straightforward. We propose the use of a dose-efficient approach, so-called multimode tomography, during which tilt series of low and high angle annular dark field scanning transmission electron microscopy projection images are acquired simultaneously. In this manner, not only reliable information can be obtained concerning the shape of the nanoparticles, but also the twin planes can be clearly visualized in 3D. As an example, we demonstrate the application of this approach to identify the position of the seeds with respect to the twinning planes in anisotropic gold nanoparticles synthesized using a seed mediated growth approach.

Direct Visualization and Control of Atomic Mobility at {100} Surfaces of Ceria in the Environmental Transmission Electron Microscope

Ceria is one of the world's most prominent material for applications in heterogeneous catalysis, as catalyst support or catalyst itself. Despite an exhaustive literature on the structure of reactive facets of CeO₂ in line with its catalytic mechanisms, the temporal evolution of the atomic surface structure exposed to realistic redox conditions remains elusive. Here, we provide a direct visualization of the atomic mobility of cerium atoms on {100} surfaces of CeO₂ nanocubes at room temperature in high vacuum, O₂, and CO₂ atmospheres in an environmental transmission electron microscope. Through quantification of the cationic mobility, we demonstrate the control of the surface dynamics under exposure to O₂ and CO₂ atmospheres, providing opportunities for a better understanding of the intimate catalytic mechanisms.

Sub-nanometer surface chemistry and orbital hybridization in lanthanum-doped ceria nano-catalysts revealed by 3D electron microscopy

Surface chemical composition, electronic structure, and bonding characteristics determine catalytic activity but are not resolved for individual catalyst particles by conventional spectroscopy. In particular, the nano-scale three-dimensional distribution of aliovalent lanthanide dopants in ceria catalysts and their effect on the surface electronic structure remains unclear. Here, we reveal the surface segregation of dopant cations and oxygen vacancies and observe bonding changes in lanthanum-doped ceria catalyst particle aggregates with sub-nanometer precision using a new model-based spectroscopic tomography approach. These findings refine our understanding of the spatially varying electronic structure and bonding in ceria-based nanoparticle aggregates with aliovalent cation concentrations and identify new strategies for advancing high efficiency doped ceria nano-catalysts.