Application of EELS and EFTEM to the life sciences enabled by the contributions of Ondrej Krivanek

Identifying and imaging polymer functionality at high spatial resolution with core-loss EELS

Electron energy loss spectroscopy (EELS) is a proven tool for probing materials chemistry at high spatial resolution. Core-loss EELS fine structure should allow measurement of local polymer chemistry. For organic materials, sensitivity to radiolysis is expected to limit the resolution achievable with EELS: but core-loss EELS has proven difficult at any resolution, yielding inconsistent spectra that compare unfavorably with theoretically analogous x-ray absorption spectra. Many of the previously identified shortcomings should not be limiting factors on modern equipment. This study establishes that EELS can generate identifiable carbon K-edge spectra for a range of common polymer types and chemistry, and demonstrates fine structure features matching prior x-ray absorption spectra. EELS fine structure features broaden intuitively with the instrument's energy resolution, and beam-induced features are readily differentiated by collecting spectra at a series of doses. The results are demonstrated with spectrum images of a model polymer blend, and used to estimate practical pixel sizes that can be used for mapping core-loss EELS as a function of electron dose.

Elemental mapping of labelled biological specimens at intermediate energy loss in an energy-filtered TEM acquired using a direct detection device

The technique of colour EM that was recently developed enabled localisation of specific macromolecules/proteins of interest by the targeted deposition of diaminobenzidine (DAB) conjugated to lanthanide chelates. By acquiring lanthanide elemental maps by energy-filtered transmission electron microscopy (EFTEM) and overlaying them in pseudo-colour over the conventional greyscale TEM image, a colour EM image is generated. This provides a powerful tool for visualising subcellular component/s, by the ability to clearly distinguish them from the general staining of the endogenous cellular material. Previously, the lanthanide elemental maps were acquired at the high-loss M4,5 edge (excitation of 3d electrons), where the characteristic signal is extremely low and required considerably long exposures. In this paper, we explore the possibility of acquiring the elemental maps of lanthanides at their N4,5 edge (excitation of 4d electrons), which occurring at a much lower energy-loss regime, thereby contains significantly greater total characteristic signal owing to the higher inelastic scattering cross-sections at the N4,5 edge. Acquiring EFTEM lanthanide elemental maps at the N4,5 edge instead of the M4,5 edge, provides ∼4× increase in signal-to-noise and ∼2× increase in resolution. However, the interpretation of the lanthanide maps acquired at the N4,5 edge by the traditional 3-window method, is complicated due to the broad shape of the edge profile and the lower signal-above-background ratio. Most of these problems can be circumvented by the acquisition of elemental maps with the more sophisticated technique of EFTEM Spectrum Imaging (EFTEM SI). Here, we also report the chemical synthesis of novel second-generation DAB lanthanide metal chelate conjugates that contain 2 lanthanide ions per DAB molecule in comparison with 0.5 lanthanide ion per DAB in the first generation. Thereby, fourfold more Ln3+ per oxidised DAB would be deposited providing significant amplification of signal. This paper applies the colour EM technique at the intermediate-loss energy-loss regime to three different cellular targets, namely using mitochondrial matrix-directed APEX2, histone H2B-Nucleosome and EdU-DNA. All the examples shown in the paper are single colour EM images only.

Exploring valence states of abnormal mineral deposits in biological tissues using correlative microscopy and spectroscopy techniques: A case study on ferritin and iron deposits from Alzheimer's disease patients

Abnormal accumulation of inorganic trace elements in a human brain, such as iron, zinc and aluminum, oftentimes manifested as deposits and accompanied by a chemical valence change, is pathologically relevant to various neurodegenerative diseases. In particular, Fe²⁺ has been hypothesized to produce free radicals that induce oxidative damage and eventually cause Alzheimer's disease (AD). However, traditional biomedical techniques, e.g. histology staining, are limited in studying the chemical composition and valence states of these inorganic deposits. We apply commonly used physical (phys-) science methods such as X-ray energy dispersive spectroscopy (EDS), focused-ion beam (FIB) and electron energy loss spectroscopy (EELS) in transmission electron microscopy in conjunction with magnetic resonance imaging (MRI), histology and optical microscopy (OM) to study the valence states of iron deposits in AD patients. Ferrous ions are found in all deposits in brain tissues from three AD patients, constituting 0.22-0.50 of the whole iron content in each specimen. Such phys-techniques are rarely used in medical science and have great potential to provide unique insight into biomedical problems.

Across the spectrum: integrating multidimensional metal analytics for in situ metallomic imaging

To know how much of a metal species is in a particular location within a biological context at any given time is essential for understanding the intricate roles of metals in biology and is the fundamental question upon which the field of metallomics was born. Simply put, seeing is powerful. With the combination of spectroscopy and microscopy, we can now see metals within complex biological matrices complemented by information about associated molecules and their structures. With the addition of mass spectrometry and particle beam based techniques, the field of view grows to cover greater sensitivities and spatial resolutions, addressing structural, functional and quantitative metallomic questions from the atomic level to whole body processes. In this perspective, I present a paradigm shift in the way we relate to and integrate current and developing metallomic analytics, highlighting both familiar and perhaps less well-known state of the art techniques for in situ metallomic imaging, specific biological applications, and their use in correlative studies. There is a genuine need to abandon scientific silos and, through the establishment of a metallomic scientific platform for further development of multidimensional analytics for in situ metallomic imaging, we have an incredible opportunity to enhance the field of metallomics and demonstrate how discovery research can be done more effectively.

A carefully designed nanoplatform based on multi walled carbon nanotube wrapped with aptamers

The interaction between carbon nanotubes (CNTs) and biological molecules of diagnostic and therapeutic interest, as well as the internalization of the CNTs-biomolecules complexes in different types of cell, has been extensively studied due to the potential use of these nanocomplexes as multifunctional nanoplatforms in a great variety of biomedical applications. The effective use of these nanobiotechnologies requires broad multidisciplinary studies of biocompatibility, regarding, for example, the in vitro and in vivo nanotoxicological assays, the capacity to target specific cells and the evaluation of their biomedical potential. However, the first step to be reached is the careful obtainment of the nanoplatform and the understanding of the actual surface composition and structural integrity of the complex system. In this work, we show the detailed construction of a nanoplatform created by the noncovalent interaction between oxidized multi walled carbon nanotubes (MWCNTs) and a DNA aptamer targeting tumor cells. The excess free aptamer was removed by successive washes, revealing the actual surface of the nanocomplex. The MWCNT-aptamer interaction by π-stacking was evidenced and shown to contribute in obtaining a stable nanocomplex compatible with aqueous media having good cell viability. The nucleotide sequence of the aptamer remained intact after the functionalization, allowing its use in further studies of specificity and binding affinity and for the construction of functional nanoplatforms.

The 2018 correlative microscopy techniques roadmap

Developments in microscopy have been instrumental to progress in the life sciences, and many new techniques have been introduced and led to new discoveries throughout the last century. A wide and diverse range of methodologies is now available, including electron microscopy, atomic force microscopy, magnetic resonance imaging, small-angle x-ray scattering and multiple super-resolution fluorescence techniques, and each of these methods provides valuable read-outs to meet the demands set by the samples under study. Yet, the investigation of cell development requires a multi-parametric approach to address both the structure and spatio-temporal organization of organelles, and also the transduction of chemical signals and forces involved in cell-cell interactions. Although the microscopy technologies for observing each of these characteristics are well developed, none of them can offer read-out of all characteristics simultaneously, which limits the information content of a measurement. For example, while electron microscopy is able to disclose the structural layout of cells and the macromolecular arrangement of proteins, it cannot directly follow dynamics in living cells. The latter can be achieved with fluorescence microscopy which, however, requires labelling and lacks spatial resolution. A remedy is to combine and correlate different readouts from the same specimen, which opens new avenues to understand structure-function relations in biomedical research. At the same time, such correlative approaches pose new challenges concerning sample preparation, instrument stability, region of interest retrieval, and data analysis. Because the field of correlative microscopy is relatively young, the capabilities of the various approaches have yet to be fully explored, and uncertainties remain when considering the best choice of strategy and workflow for the correlative experiment. With this in mind, the Journal of Physics D: Applied Physics presents a special roadmap on the correlative microscopy techniques, giving a comprehensive overview from various leading scientists in this field, via a collection of multiple short viewpoints.

ColorEM: analytical electron microscopy for element-guided identification and imaging of the building blocks of life

Nanometer-scale identification of multiple targets is crucial to understand how biomolecules regulate life. Markers, or probes, of specific biomolecules help to visualize and to identify. Electron microscopy (EM), the highest resolution imaging modality, provides ultrastructural information where several subcellular structures can be readily identified. For precise tagging of (macro)molecules, electron-dense probes, distinguishable in gray-scale EM, are being used. However, practically these genetically-encoded or immune-targeted probes are limited to three targets. In correlated microscopy, fluorescent signals are overlaid on the EM image, but typically without the nanometer-scale resolution and limited to visualization of few targets. Recently, analytical methods have become more sensitive, which has led to a renewed interest to explore these for imaging of elements and molecules in cells and tissues in EM. Here, we present the current state of nanoscale imaging of cells and tissues using energy dispersive X-ray analysis (EDX), electron energy loss spectroscopy (EELS), cathodoluminescence (CL), and touch upon secondary ion mass spectroscopy at the nanoscale (NanoSIMS). ColorEM is the term encompassing these analytical techniques the results of which are then displayed as false-color at the EM scale. We highlight how ColorEM will become a strong analytical nano-imaging tool in life science microscopy.