Confocal lens focused piezoelectric lithotripter

Higher harmonics dynamic focalization in single-element ring transducers using biaxial driving

Biaxial driving is a new driving technique that allows the steering of the ultrasound field generated by a single-element piezoceramic transducer. Because of their natural axisymmetric geometry, ultrasound generation with ring transducers can take advantage of the biaxial driving to change the focus of the beam generated by this type of transducer using only two driving signals. In this study, we applied the biaxial driving technique into a single-element PZT ring transducer operating at 500 kHz to produce a change in size and position of the focal spot while using the 1st (482 kHz), 3rd (1.362 MHz) and 5th (2.62 MHz) harmonic excitation. The transducer had a thickness of 2.85 mm, an inner diameter of 9.75 mm and a ring width of 2.0 mm, and two pairs of electrodes as required for biaxial driving. Simulation and experimental results showed that both the focal area and the distance at which the focal area centre was located changed as a function of the phase and power difference between the two driving signals. Experimental results showed that the focal area could be reduced from 31.6 mm² (conventional driving) to 3.4 mm² (89 % reduction) when using the first harmonic excitation. For the third harmonic, the focal area could be reduced from 4.0 mm² (conventional driving) to 3.3 mm² (17.5 % reduction). For the fifth harmonic, the focal area could be reduced from 1.7 mm² (conventional driving) to 1 mm² (41.7 % reduction). Results also demonstrated the centre of the focus could be displaced between 3.0 mm and 9.3 mm from the surface of the transducer when using the first harmonic, between 7.3 mm and 8.4 mm at the third harmonic, and between 4.9 mm and 8.2 mm at the fifth harmonic. The reduction in the focus area, as well as the possibility to displace the focus dynamically will be advantageous for preclinical applications of focused ultrasound, especially on drug delivery and neuromodulation studies in small rodents.

Prenylated Trans-Cinnamic Esters and Ethers against Clinical Fusarium spp.: Repositioning of Natural Compounds in Antimicrobial Discovery

Onychomycosis is a common nail infection mainly caused by species belonging to the F. oxysporum, F. solani, and F. fujikuroi species complexes. The aim of this study was to evaluate the in vitro susceptibility of six representative strains of clinically relevant Fusarium spp. toward a set of natural-occurring hydroxycinnamic acids and their derivatives with the purpose to develop naturally occurring products in order to cope with emerging resistance phenomena. By introducing a prenylated chain at one of the hydroxy groups of trans-cinnamic acids 1–3, ten prenylated derivatives (coded 4–13) were preliminarily investigated in solid Fusarium minimal medium (FMM). Minimal inhibitory concentration (MIC) and lethal dose 50 (LD₅₀) values were then determined in liquid FMM for the most active selected antifungal p-coumaric acid 3,3′-dimethyl allyl ester 13, in comparison with the conventional fungicides terbinafine (TRB) and amphotericin B (AmB), through the quantification of the fungal growth. Significant growth inhibition was observed for prenylated derivatives 4–13, evidencing ester 13 as the most active. This compound presented MIC and LD₅₀ values (62–250 µM and 7.8–125 µM, respectively) comparable to those determined for TRB and AmB in the majority of the tested pathogenic strains. The position and size of the prenylated chain and the presence of a free phenol OH group appear crucial for the antifungal activity. This work represents the first report on the activity of prenylated cinnamic esters and ethers against clinical Fusarium spp. and opens new avenues in the development of alternative antifungal compounds based on a drug repositioning strategy.