Wideband 2-D sparse array optimization combined with multiline reception for real-time 3-D medical ultrasound

Design and Evaluation of a Weighted Periodic Sparse Array for Low-Complexity 1-D Phased Array Ultrasound Imaging Systems

A sparse array offers a significant reduction in the complexity of ultrasonic imaging systems by decreasing the number of active elements and associated electrical circuits needed to form a focused beam. Consequently, for 1-D arrays, it has been adopted in the development of miniaturized systems such as portable, handheld, or smartphone-based systems. Previously, we developed an analytic method that can design a pair of 1-D periodic sparse arrays (PSAs) satisfying three specific constraints, which are the array size, desired grating lobe level, and sparseness factor (SF). In this study, we further developed our method by incorporating aperture weighting functions, which take the form of tapered rectangular functions to introduce null points on the beam pattern. These null points effectively suppress grating lobes generated by a matching pair of arrays. The design process commences with determining transmit and receive PSA patterns, followed by deriving corresponding aperture weighting functions. First, aperture functions of a base and weighting arrays are convolved, which is then upsampled to the targeted array size. Finally, the upsampled aperture is convolved to an aperture function of a subarray, resulting in weighted PSAs (wPSAs). Pulsed wave (PW) simulation confirmed improved grating lobe suppression with wPSAs compared to PSAs. Phantom imaging experiments using a 1-D phased array validated the enhanced contrast due to suppressed grating lobes but at the cost of small degradation in lateral resolution. The signal-to-noise ratio (SNR) also gradually declined with the greater SFs, but no significant difference in SNR was observed between wPSAs and PSAs. Finally, in vivo echocardiography imaging highlighted the clinical potential of wPSAs, particularly with high SFs. Overall, these results suggest that wPSAs can effectively enhance contrast compared to PSAs under the given SF or, alternatively, wPSA with greater SFs can achieve comparable image quality to PSAs with lower SFs. In conclusion, the wPSA approach holds promise for further reducing the complexity of ultrasound imaging systems.

Three-Dimensional Ultrasound Localization Microscopy with Bipartite Graph-Based Microbubble Pairing and Kalman-Filtering-Based Tracking on a 256-Channel Verasonics Ultrasound System with a 32 × 32 Matrix Array

Three-dimensional (3D) ultrasound localization microscopy (ULM) using a 2-D matrix probe and microbubbles (MBs) has been recently proposed to visualize microvasculature beyond the ultrasound diffraction limit in three spatial dimensions. However, 3D ULM suffers from several limitations: (1) high system complexity due to numerous channel counts, (2) complex MB flow dynamics in 3D, and (3) extremely long acquisition time. To reduce the system complexity while maintaining high image quality, we used a sub-aperture process to reduce received channel counts. To address the second issue, a 3D bipartite graph-based method with Kalman filtering-based tracking was used in this study for MB tracking. An MB separation approach was incorporated to separate high concentration MB data into multiple, sparser MB datasets, allowing better MB localization and tracking for a limited acquisition time. The proposed method was first validated in a flow channel phantom, showing improved spatial resolutions compared with the contrasted enhanced power Doppler image. Then the proposed method was evaluated with an in vivo chicken embryo brain dataset. Results showed that the reconstructed 3D super-resolution image achieved a spatial resolution of around 52 μm (smaller than the wavelength of around 200 μm). Microvessels that cannot be resolved clearly using localization only, can be well identified with the tailored 3D pairing and tracking algorithms. To sum up, the feasibility of the 3D ULM is shown, indicating the great possibility in clinical applications.

Design, Implementation, and Medical Applications of 2-D Ultrasound Sparse Arrays

An ultrasound sparse array consists of a sparse distribution of elements over a 2-D aperture. Such an array is typically characterized by a limited number of elements, which in most cases is compatible with the channel number of the available scanners. Sparse arrays represent an attractive alternative to full 2-D arrays that may require the control of thousands of elements through expensive application-specific integrated circuits (ASICs). However, their massive use is hindered by two main drawbacks: the possible beam profile deterioration, which may worsen the image contrast, and the limited signal-to-noise ratio (SNR), which may result too low for some applications. This article reviews the work done for three decades on 2-D ultrasound sparse arrays for medical applications. First, random, optimized, and deterministic design methods are reviewed together with their main influencing factors. Then, experimental 2-D sparse array implementations based on piezoelectric and capacitive micromachined ultrasonic transducer (CMUT) technologies are presented. Sample applications to 3-D (Doppler) imaging, super-resolution imaging, photo-acoustic imaging, and therapy are reported. The final sections discuss the main shortcomings associated with the use of sparse arrays, the related countermeasures, and the next steps envisaged in the development of innovative arrays.

Recent advances in vascular ultrasound imaging technology and their clinical implications

In this paper recent advances in vascular ultrasound imaging technology are discussed, including three-dimensional ultrasound (3DUS), contrast-enhanced ultrasound (CEUS) and strain- (SE) and shear-wave-elastography (SWE). 3DUS imaging allows visualisation of the actual 3D anatomy and more recently of flow, and assessment of geometrical, morphological and mechanical features in the carotid artery and the aorta. CEUS involves the use of microbubble contrast agents to estimate sensitive blood flow and neovascularisation (formation of new microvessels). Recent developments include the implementation of computerised tools for automated analysis and quantification of CEUS images, and the possibility to measure blood flow velocity in the aorta. SE, which yields anatomical maps of tissue strain, is increasingly being used to investigate the vulnerability of the carotid plaque, but is also promising for the coronary artery and the aorta. SWE relies on the generation of a shear wave by remote acoustic palpation and its acquisition by ultrafast imaging, and is useful for measuring arterial stiffness. Such advances in vascular ultrasound technology, with appropriate validation in clinical trials, could positively change current management of patients with vascular disease, and improve stratification of cardiovascular risk.