Ultrasonic irradiation assisted syntheses of one-dimensional di(azido)-dipyridylamine Cu(II) coordination polymer nanoparticles

Recent advances in metal-organic frameworks for stimuli-responsive drug delivery

After entering the human body, drugs for treating diseases, which are prone to delivery and release in an uncontrolled manner, are affected by various factors. Based on this, many researchers utilize various microenvironmental changes encountered during drug delivery to trigger drug release and have proposed stimuli-responsive drug delivery systems. In recent years, metal-organic frameworks (MOFs) have become promising stimuli-responsive agents to release the loaded therapeutic agents at the target site to achieve more precise drug delivery due to their high drug loading, excellent biocompatibility, and high stimuli-responsiveness. The MOF-based stimuli-responsive systems can respond to various stimuli under pathological conditions at the site of the lesion, releasing the loaded therapeutic agent in a controlled manner, and improving the accuracy and safety of drug delivery. Due to the changes in different physical and chemical factors in the pathological process of diseases, the construction of stimuli-responsive systems based on MOFs has become a new direction in drug delivery and controlled release. Based on the background of the rapidly increasing attention to MOFs applied in drug delivery, we aim to review various MOF-based stimuli-responsive drug delivery systems and their response mechanisms to various stimuli. In addition, the current challenges and future perspectives of MOF-based stimuli-responsive drug delivery systems are also discussed in this review.

State of the art on the ultrasonic-assisted removal of environmental pollutants using metal-organic frameworks

The environmental and health issues of drinking water and effluents released into nature are among the major area of contention in the past few decades. With the growth of ultrasound-based approaches in water and wastewater treatment, promising materials have also been considered to employ their advantages. Metal-organic frameworks (MOFs) are among the porous materials that have received great attention from researchers in recent years. Features such as high porosity, large specific surface area, electronic properties like semi-conductivity, and the capacity to coordinate with the organic matter have resulted in a substantial increase in scientific researches. This work deals with a comprehensive review of the application of MOFs for ultrasonic-assisted pollutant removal from wastewater. In this regard, after considering features and synthesis methods of MOFs, the mechanisms of several ultrasound-based approaches including sonocatalysis, sonophotocatalysis, and sono-adsorption are well assessed for removal of different organic compounds by MOFs. These methods are compared with some other water treatment processes with the application of MOFs in the absence of ultrasound. Also, the main concern about MOFs including environmental hazards and water stability is fully discussed and some techniques are proposed to reduce hazardous effects of MOFs and improve stability in humid/aqueous environments. Economic aspects for the preparation of MOFs are evaluated and cost estimates for ultrasonic-assisted AOP approaches were provided. Finally, the future outlooks and the new frontiers of ultrasonic-assisted methods with the help of MOFs in global environmental pollutant removal are presented.

Biomedical Applications of Metal-Organic Frameworks for Disease Diagnosis and Drug Delivery: A Review

Metal-organic frameworks (MOFs) are a novel class of porous hybrid organic-inorganic materials that have attracted increasing attention over the past decade. MOFs can be used in chemical engineering, materials science, and chemistry applications. Recently, these structures have been thoroughly studied as promising platforms for biomedical applications. Due to their unique physical and chemical properties, they are regarded as promising candidates for disease diagnosis and drug delivery. Their well-defined structure, high porosity, tunable frameworks, wide range of pore shapes, ultrahigh surface area, relatively low toxicity, and easy chemical functionalization have made them the focus of extensive research. This review highlights the up-to-date progress of MOFs as potential platforms for disease diagnosis and drug delivery for a wide range of diseases such as cancer, diabetes, neurological disorders, and ocular diseases. A brief description of the synthesis methods of MOFs is first presented. Various examples of MOF-based sensors and DDSs are introduced for the different diseases. Finally, the challenges and perspectives are discussed to provide context for the future development of MOFs as efficient platforms for disease diagnosis and drug delivery systems.

Developing a magnetic metal organic framework of copper bearing a mixed azido/butane-1,4-dicarboxylate bridge: magnetic and gas adsorption properties

A magnetic metal organic framework {[Cu(but-1,4-dc)0.5(N3)(H2O)]·H2O}n (MFUM-1(Cu)) (but-1,4-dc = butane-1,4-dicarboxylate) was synthesized and characterized structurally and magnetically. In MFUM-1(Cu), each CuII ion has a distorted octahedral geometry with an obvious Jahn-Teller distortion, where the coordination environment is composed of mixed EO-azido/aliphatic based carboxylate/H2O threefold bridges. These bridges extend the structure of MFUM-1(Cu) in two dimensions by covalent connectivity and form square-shaped channels. Also, a study was done to determine the effectiveness of sonochemical synthesis for the preparation of nano-sheets of MFUM-1(Cu) and subsequently the influence of particle size on physical properties such as magnetic behavior and thermal stability. The particles were characterized by elemental analyses, infrared spectroscopy (IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and powder X-ray diffraction (PXRD) analyses. The effects of parameters such as concentration, solvent, and reaction time on the size distribution, morphology, and yield of product were carefully studied. The magnetic properties of MFUM-1(Cu) and corresponding nano-structure were examined which indicated metamagnetism with strong intrachain ferromagnetic coupling versus the weak interchain antiferromagnetic coupling. Finally, the application of MFUM-1(Cu) in the separation of carbon dioxide from nitrogen and also from methane was theoretically investigated. High calculated selectivity of CO2 over N2 and CH4 reveals the potential application of MFUM-1(Cu) in practical systems of gas separation.

Ultrasound irradiation effect on morphological properties of a 3D nano zinc(II) supramolecular coordination polymer

Nano-structures of [Zn(L)(atpt)]_n (1) (L=1,2-bis(2-methylbenzimidazol-1-ylmethyl)benzene and H₂atpt=2-aminoterephthalic acid) were obtained by hydrothermal and sonochemical approaches, characterized by scanning electron microscopy (SEM), IR, powder X-ray diffraction (PXRD), and elemental analysis. CP 1 features a 2D (4,4) network with the point symbol {4⁴.6²}, the 3D supramolecular architecture in CP 1 is controlled through π⋯π stacking interactions. The influence of various concentrations of initial reagents, power of ultrasound irradiation, and ultrasound time on the morphology and size of nano-structured CP 1 were studied in detail. In addition, the luminescence and photocatalytic properties of the nanoparticles of CP 1 for the degradation of methyl blue (MB) have also been investigated.

Constructing two 1D coordination polymers and one mononuclear complex by pyrazine- and pyridinedicarboxylic acids under mild and sonochemical conditions: magnetic and CSD studies

Two 1D coordination polymers and one mononuclear complex were synthesized. Nanostructures of the CPs were prepared by a sonochemical method.

Ultrasound irradiation effect on morphology and size of two new potassium coordination supramolecule compounds

Two new potassium coordination supramolecular compounds (2D and 1D), [K(H₃L)(H₂L)(H₂O)]_n·H₂O (1) and [K(H₂L')(HL')(H₂O)₂]·H₂O (2), (L=1,3,5-tricarboxylic acid, L'=2,6-pyridinedicarboxylic acid), have been synthesized under different experimental conditions. Micrometric crystals (bulk) or nano-sized materials have been obtained depending on using the branch tube method or sonochemical irradiation. All materials have been characterized by field emission scanning electron microscopy (FE-SEM), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), FT-IR spectroscopy and elemental analyses. Single crystal X-ray analyses on compounds 1 and 2 show that K⁺ ions are 3- and 7-coordinated, respectively. Additionally, H-bonds incorporate the layers and chains in 1 and 2 into 3D and 2D (along (0,0,1) direction) frameworks. Topological analysis shows that the compound 1 and 2 are 3,6-coordinated kgd and 2,4-coordinated 2,4C4 net. The thermal stability of compounds 1 and 2 in bulk and nano-size has been studied by thermal gravimetric (TG) and differential thermal analyses (DTA) and compared each other. The role of different parameters like temperature, reaction time and ultrasound irradiation power on the growth and morphology of the nano-structures are studied. Results suggest that an increase of temperature, sonication power and reduction of reaction time led to a particle size decrease.

Sonochemical procedures; the main synthetic method for synthesis of coinage metal ion supramolecular polymer nano structures

During the last two decades, supramolecular polymers have received great attention and the number of their synthesized compounds is still growing. Although people have long been interested in their crystalline network form it was only until 2005 that the first examples of nano- or microscale coordination polymers particles be demonstrated. This review tries to give an overview of all nano supramolecular compounds which were reported from coinage metal ions, their attributed synthetic procedures and to investigate the relation between the dimensions of coinage metal ions (Cu, Ag and Au) coordination and supramolecular polymers with their nano-structural morphologies and dimensions. Eleven compounds (from twenty compounds) with nano-structure morphology were prepared by sonochemical process and Ag(I) coordination and supramolecular polymer nano-structures can be easily prepared by sonochemical procedures.

Multifunctional metal-organic frameworks: from academia to industrial applications

After three decades of intense and fundamental research on metal-organic frameworks (MOFs), is there anything left to say or to explain? The synthesis and properties of MOFs have already been comprehensively described elsewhere. It is time, however, to prove the nature of their true usability: technological applications based on these extended materials require development and implementation as a natural consequence of the up-to-known intensive research focused on their design and preparation. The current large number of reviews on MOFs emphasizes practical strategies to develop novel networks with varied crystal size, shape and topology, being mainly devoted to academic concerns. The present survey intends to push the boundaries and summarise the state-of-the-art on the preparation of promising (multi)functional MOFs in worldwide laboratories and their use as materials for industrial implementation. This review starts, on the one hand, to describe several tools and striking examples of remarkable and recent (multi)functional MOFs exhibiting outstanding properties (e.g., in gas adsorption and separation, selective sorption of harmful compounds, heterogeneous catalysis, luminescent and corrosion protectants). On the other hand, and in a second part, it intends to use these examples of MOFs to incite scientists to move towards the transference of knowledge from the laboratories to the industry. Within this context, we exhaustively review the many efforts of several worldwide commercial companies to bring functional MOFs towards the daily use, analysing the various patents and applications reported to date. Overall, this review goes from the very basic concepts of functional MOF engineering and preparation ending up in their industrial production on a large scale and direct applications in society.