Catalyst-free sonosynthesis of highly substituted propanamide derivatives in water

Isocyanide-based Multicomponent Reactions (IMCRs) in Water or Aqueous Biphasic Systems

BACKGROUND

Isocyanide is an intriguing one-carbon synthon that is frequently employed in a variety of carbon-carbon and carbon-heteroatom bond-forming reactions. Isocyanide-based multicomponent reactions (IMCRs) are effective synthetic tools in organic synthesis for the preparation of complex heterocyclic molecules. The IMCRs in water have become an attractive research direction, enabling simultaneous growth of both IMCRs and green solvents towards ideal organic synthesis.

OBJECTIVE

The goal of this review is to provide a general overview of IMCRs in water or biphasic aqueous systems for accessing various organic molecules, as well as an examination of their benefits and mechanistic insights.

CONCLUSION

High atom economies, mild reaction conditions, high yields, and catalyst-free processes are crucial features of these IMCRs in water or biphasic aqueous systems.

A Green and Efficient Solvent- and Catalyst-Free Ultrasonic Dibenzylation Procedure

A greener improvement was achieved for the synthesis of diverse N,N-dibenzylated compounds from the reaction of various aromatic amines with benzyl bromide using the ultrasound irradiation in solvent- and catalyst-free conditions. The dibenzylation reactions were carried out in different solvents and solvent-free conditions under ultrasound irradiation at various temperatures. The yields were very low in all applied solvents, while in the solvent-free condition and at room temperature, the yields were excellent. Due to obtaining the high reaction yields, the catalyst was not used.

Development of New Thiazole Complexes as Powerful Catalysts for Synthesis of Pyrazole-4-Carbonitrile Derivatives under Ultrasonic Irradiation Condition Supported by DFT Studies

In this study, we are interested in preparing Fe(III), Pd(II), and Cu(II) complexes from new thiazole derivatives. All syntheses were elaborately elucidated to estimate their molecular and structural formulae, which agreed with those of mononuclear complexes. The square-planer geometry of Pd(II) complex (MATYPd) was the starting point for its use as a heterocatalyst in preparing pyrazole-4-carbonitrile derivatives 4a-o using ultrasonic irradiation through a facile one-pot reaction. The simple operation, short-time reaction (20 min), and high efficiency (97%) were the special advantages of this protocol. Furthermore, this green synthesis strategy was advanced by examination of the reusability of the catalyst in four consecutive cycles without significant loss of catalytic activity. The new synthesis strategy presented remarkable advantages in terms of safety, simplicity, stability, mild conditions, short reaction time, excellent yields, and use of a H₂O solvent. This catalytic protocol was confirmed by the density functional theory (DFT) study, which reflected the specific characteristics of such a complex. Logical mechanisms have been suggested for the successfully exerted essential physical parameters that confirmed the superiority of the Pd(II) complex in the catalytic role. Optical band gap, electrophilicity, and electronegativity features, which are essential parameters for the catalytic behavior of the Pd(II) complex, are based mainly on the unsaturated valence shell of Pd(II).

Preparation of some chromeno[4,3-d]pyrido[1,2-a]pyrimidine derivatives by ultrasonic irradiation using NiFe2O4@SiO2 grafted di(3-propylsulfonic acid) nanoparticles

NiFe₂O₄@SiO₂ grafted di(3-propylsulfonic acid) was prepared by a facile method and characterized by XRD, FT-IR, SEM-EDX, TGA, and BET techniques.

Controllable Site-Selective Construction of 4- and 5-Hydroxyalkyl-Substituted Imidazoles from Amidines, Ynals, and Water

The first example of controllable site-selective pathways to construct 4- and 5-hydroxyalkyl-substituted imidazoles through a three-component reaction of amidines, ynals, and water has been documented. Particularly, the high regioselectivity of the reaction was simply switched by changing the additives. In addition, further ¹⁸O-labeled experiments to probe a plausible mechanism and the gram-scale synthesis were studied.

Synthesis of Core-Shell Magnetic Supramolecular Nanocatalysts based on Amino-Functionalized Calix[4]arenes for the Synthesis of 4H-Chromenes by Ultrasonic Waves

One of the most common phenol-formaldehyde cyclic oligomers from hydroxyalkylation reactions that exhibit supramolecular chemistry are calixarenes. These macrocyclic compounds are qualified to act as synthetic catalysts due to their specific features including being able to form host-guest complexes, having unique structural scaffolds and their relative ease of chemical modifications with a variety of functions on their upper rim and lower rim. Here, a functional magnetic nanocatalyst was designed and synthesized by using a synthetic amino-functionalized calix[4]arene. Its catalytic activity was evaluated in a one-pot synthesis of 2-amino-4H-chromene derivatives. Besides, this novel magnetic nanocatalyst was characterized by spectroscopic and analytical techniques such as FT-IR, EDX, FE-SEM, TEM VSM, XRD analysis.

Hantzsch-like synthesis of novel bis(hexahydroacridine-1,8-diones), bis(tetrahydrodipyrazolo[3,4-b:4′,3′-e]pyridines), and bis(pyrimido[4,5-b]quinolines) incorporating thieno[2,3-b]thiophenes

A novel series of bis(hexahydroacridine-1,8-diones), bis(tetrahydrodipyrazolo[3,4- b:4′,3′- e]pyridines), and bis(pyrimido[4,5- b]quinolines) incorporating a thieno[2,3- b]thiophene core via ether or ester linkages is prepared via a Hantzsch-like reaction.

Deep eutectic solvent for an expeditious sono-synthesis of novel series of bis-quinazolin-4-one derivatives as potential anti-cancer agents

To produce a new category of anti-cancer compounds, a facile and environmentally sustainable method for preparing diversified bis-quinazolinones was demonstrated using recyclable deep eutectic solvent (DES) under ultrasonic irradiation. The reactions were performed smoothly with a wide scope of substrates affording the desired derivatives in good-to-excellent yields under an atom-economical pathway. Particularly, halogen substituents that are amenable for further synthetic elaborations are well tolerated. Furthermore, the 'greenness' of the protocol was assessed within the scope of several green metrics and found to display an excellent score in the specified parameters. Cytotoxic activity of all novel bis-quinazolinones was investigated utilizing two cancer cell lines: breast (MCF-7) and lung (A549) cell lines and their IC50 values were determined. Most of the prepared derivatives displayed fascinating inhibitory activity with IC50 values in a low micromolar range. Remarkably, the derivative 7e [3,3'-(sulfonylbis(4,1-phenylene))bis(2-methyl-6-nitroquinazolin-4(3H)-one)] showed superior potency against MCF-7 and A549 cancer cell lines, with IC50 values of 1.26 µM and 2.75 µM, respectively. Moreover, this derivative was found to have low toxicity to the normal breast cell line (MCF-10A) and could serve as a promising lead candidate for further development.

Preparation of chitosan nanoparticles from shrimp shells and investigation of its catalytic effect in diastereoselective synthesis of dihydropyrroles

Preparation of chitosan nanoparticles (CS-NPs) was examined from shrimp shells for their catalytic activity. The yield of crude chitosan was 87.8%. The structure of chitosan nanoparticles was determined by FT-IR, SEM and XRD analysis. Then, diastereoselective synthesis of dihydropyrroles was done using chitosan nanoparticles in water under ultrasonic irradiation. This polymeric nanocatalyst could be used instead of the old toxic commercial organic basic catalysts and could be readily isolated from the reaction mixture and recycled several times without significant loss of catalytic activity.

Structures, luminescence and photocatalytic properties of two nanostructured cadmium(II) coordination polymers synthesized by sonochemical process

By varying the dicarboxylate coligands, two nano-sized cadmium(II) coordination polymers (CPs), [Cd(bix)(DCTP)]_n (1) and [Cd(bix)₂(BPDC)]_n (2) (bix=1,4-bis(imidazol-1-ylmethyl)benzene, H₂DCTP=2,5-dichloroterephthalic acid, H₂BPDC=biphenyl-4,4'-dicarboxylic acid) were synthesized hydrothermally and sonochemical irradiation. CPs 1-2 and their nanostructures have been characterized by elemental analysis, single-crystal X-ray diffraction, and scanning electron microscopy (SEM). CP 1 features a uninodal 4-connected 2D sql network consisting of two different helical arrays. Whilst, CP 2 displays 2D layer which constructed by the linear chains and M2L2 type discrete loops. The effect of ultrasonic power and temperature on the morphology and size of CPs 1-2 are investigated in detail. Nano-sized 1-2 show the relatively high photocatalytic performance for degradation of Methylene Blue (MB) under UV irradiation.

Ultrasonic accelerated Knoevenagel condensation by magnetically recoverable MgFe2O4 nanocatalyst: A rapid and green synthesis of coumarins under solvent-free conditions

The novel and green procedure to synthesis of 3-substituted coumarins was performed through the Knoevenagel condensation between various salicylaldehydes and 1,3-dicarbonyl compounds by MgFe₂O₄ nanoparticles as an efficient catalyst under solvent-free condition using ultrasound irradiation. The nano catalyst was easily recovered by an external magnet and reused for several times without significant loss of its catalytic performance. Compare to the previous works, this progressive protocol have advantages such as simple workup, high yields of coumarins, solvent free condition, environmentally benign and short reaction times.

Sonochemical synthesis and characterization of new nanostructures cobalt(II) metal-organic complexes derived from the azo-coupling reaction of 4-amino benzoic acid with anthranilic acid, salicylaldehyde and 2-naphtol

Nanostructures of three new cobalt(II) complexes, (CoL₁)·0.5DMF·1.5MeOH (1), [H₂L₁=5-(4-Carboxy phenyl azo) anthranilic acid], (Co(L₂)₂)·1.5MeOH (2), [HL₂=5-(4-Carboxy phenyl azo) salicylaldehyde] and (Co(L₃)₂)·0.5DMF·0.5MeOH (3), [HL₃=1-(4-Carboxy phenyl azo) 2-naphtol], have been synthesized by the reaction of H₂L₁, HL₂ and HL₃ with Co(OAc)₂·4H₂O through sonochemical process. Calcination of the nano-sized compounds 1-3 yield Co₃O₄ nanoparticles at 450°C under air atmosphere. These nanostructures were characterized by X-ray powder diffraction (XRD) and Scanning Electron Microscopy (SEM). Thermal stability of compounds 1-3 was studied by thermogravimetric (TG) and differential thermal analyses (DTA).

Recent developments on ultrasound-assisted one-pot multicomponent synthesis of biologically relevant heterocycles

Heterocycles are the backbone of organic compounds. Specially, N- &O-containing heterocycles represent privileged structural subunits well distributed in naturally occurring compounds with immense biological activities. Multicomponent reactions (MCRs) are becoming valuable tool for synthesizing structurally diverse molecular entities. On the other hand, the last decade has seen a tremendous outburst in modifying chemical processes to make them sustainable for the betterment of our environment. The application of ultrasound in organic synthesis is fulfilling some of the goals of 'green and sustainable chemistry' as it has some advantages over the traditional thermal methods in terms of reaction rates, yields, purity of the products, product selectivity, etc. Therefore the synthesis of biologically relevant heterocycles using one-pot multi-component technique coupled with the application of ultrasound is one of the thrusting areas in the 21st Century among the organic chemists. The present review deals with the "up to date" developments on ultrasound assisted one-pot multi-component synthesis of biologically relevant heterocycles reported so far.

Advances in Green Organic Sonochemistry

Over the past 15 years, sustainable chemistry has emerged as a new paradigm in the development of chemistry. In the field of organic synthesis, green chemistry rhymes with relevant choice of starting materials, atom economy, methodologies that minimize the number of chemical steps, appropriate use of benign solvents and reagents, efficient strategies for product isolation and purification and energy minimization. In that context, unconventional methods, and especially ultrasound, can be a fine addition towards achieving these green requirements. Undoubtedly, sonochemistry is considered as being one of the most promising green chemical methods (Cravotto et al. Catal Commun 63: 2-9, 2015). This review is devoted to the most striking results obtained in green organic sonochemistry between 2006 and 2016. Furthermore, among catalytic transformations, oxidation reactions are the most polluting reactions in the chemical industry; thus, we have focused a part of our review on the very promising catalytic activity of ultrasound for oxidative purposes.