An activated fluid stream--New techniques for cold water cleaning

Radiation force on a bubble located near an interface

The presence of a boundary produces marked changes in the oscillation amplitudes and types of bubble distortion modes excited by an external acoustic field. In the majority of cases, the radiation force can be determined based on the linearized equations of motion. Bispherical coordinates are used to obtain an analytical description of linearized bubble dynamics at distances from the interface comparable to those of the bubble size. In the limit of weak dissipation, explicit formulas have been derived that describe the dependence of the radiation force on the separation distance between the bubble and the interface, the material parameters of the contacting media, and the angle of incidence of the incoming wave. The component of the radiation force directed to the interface has been shown to exhibit qualitative changes when the direction of the incoming field passes through the angle of the total internal reflection.

Non-Immersion Ultrasonic Cleaning: An Efficient Green Process for Large Surfaces with Low Water Consumption

Ultrasonic cleaning is a developed and widespread technology used in the cleaning industry. The key to its success over other cleaning methods lies in its capacity to penetrate seemingly inaccessible, hard-to-reach corners, cleaning them successfully. However, its major drawback is the need to immerse the product into a tank, making it impossible to work with large or anchored elements. With the aim of revealing the scope of the technology, this paper will attempt to describe a more innovative approach to cleaning large area surfaces (walls, floors, façades, etc.) which involves applying ultrasonic cavitation onto a thin film of water, which is then deposited onto a dirty surface. Ultrasonic cleaning is an example of the proliferation of green technology, requiring 15 times less water and 115 times less power than conventional high-pressurized waterjet cleaning mechanisms. This paper will account for the physical phenomena that govern this new cleaning mechanism and the competition it poses towards more conventional pressurized waterjet technology. Being easy to use as a measure of success, specular surface cleaning has been selected to measure the degree of cleanliness (reflectance) as a function of the process’s parameters. A design of experiments has been developed in line with the main process parameters: amplitude, gap, and sweeping speed. Regression models have also been used to interpret the results for different degrees of soiling. The work concludes with the finding that the proposed new cleaning technology and process can reach up to 98% total cleanliness, without the use of any chemical product and with very low water and power consumption.

Improving livestock feed safety and infection prevention: Removal of bacterial contaminants from hay using cold water, bubbles and ultrasound

The ingestion of contaminated hay is detrimental to livestock wellbeing. In this study, the feasibility of using an ultrasonically activated stream (UAS) to clean bacterial contamination from hay was investigated. Hay samples were stained with SYTO-9 nucleic acid stain for the in-situ visualization of microbes on the surface using an episcopic differential interference contrast microscope coupled with epi-fluorescence. The total microbial load per sample was calculated by measuring the mean percentage area of SYTO-9 positive staining. The cleaning efficacy was evaluated by comparing the total microbial coverage before and after cleaning. The cleaning performance between an UAS and a non UAS were compared and results have shown that an exposure of 60 s to an UAS demonstrated an 87.94 ± 2.22% removal of the bacterial contaminants, exceeding that of non UAS (21.85 ± 13.63% removal). UAS is capable of removing bacterial contaminants without the use of antimicrobial agents, therefore its cleaning mechanism can potentially prevent infection and reduce antimicrobial resistance. The cleaning mechanism of UAS can be adapted for the development of a new hay cleaning strategy for effective removal of bacterial contaminant to improve feed safety.

Ultrasound-mediated therapies for the treatment of biofilms in chronic wounds: a review of present knowledge

Bacterial biofilms are an ever-growing concern for public health, featuring both inherited genetic resistance and a conferred innate tolerance to traditional antibiotic therapies. Consequently, there is a growing interest in novel methods of drug delivery, in order to increase the efficacy of antimicrobial agents. One such method is the use of acoustically activated microbubbles, which undergo volumetric oscillations and collapse upon exposure to an ultrasound field. This facilitates physical perturbation of the biofilm and provides the means to control drug delivery both temporally and spatially. In line with current literature in this area, this review offers a rounded argument for why ultrasound-responsive agents could be an integral part of advancing wound care. To achieve this, we will outline the development and clinical significance of biofilms in the context of chronic infections. We will then discuss current practices used in combating biofilms in chronic wounds and then critically evaluate the use of acoustically activated gas microbubbles as an emerging treatment modality. Moreover, we will introduce the novel concept of microbubbles carrying biologically active gases that may facilitate biofilm dispersal.

The in situ electrochemical detection of microbubble oscillations during motion through a channel

Bubble oscillation has many applications, from driving local fluid motion to cleaning. However, in order to exploit their action, a full understanding of this motion, particularly in confined spaces (such as crevices etc. which are important in ultrasonic decontamination) is important. To this end, here we show how a Coulter counter can be used to characterize microbubbles produced through the ultrasonication of electrolytes. These microbubbles are shown to exist in relatively high concentrations while bubble activity is driven by ultrasound. Detection of these microbubbles, and their oscillatory behaviour, is achieved via translocation through a cylindrical glass microchannel (GMC). The microbubbles oscillate within the 40 μm channel employed and this behaviour is observed to change over the translocation period. This is attributed to the acoustic environment present or changes to the physical conditions in the interior of the chamber compared to the exterior. High-speed imaging confirms the presence of microbubbles as they move or 'skate' across the surface of the structures present before translocating through the channel. The observations are useful as they show that microbubble oscillation occurs within small structures, is preceded by surface confined bubbles and could be enhanced through pressure driven flow through a structure.

Low-intensity ultrasound induced cavitation and streaming in oxygen-supersaturated water: Role of cavitation bubbles as physical cleaning agents

A number of acoustic and fluid-dynamic phenomena appear in ultrasonic cleaning baths and contribute to physical cleaning of immersed surfaces. Propagation and repeated reflection of ultrasound within cleaning baths build standing-wave-like acoustic fields; when an ultrasound intensity gradient appears in the acoustic fields, it can in principle induce steady streaming flow. When the ultrasound intensity is sufficiently large, cavitation occurs and oscillating cavitation bubbles are either trapped in the acoustic fields or advected in the flow. These phenomena are believed to produce mechanical action to remove contaminant particles attached at material surfaces. Recent studies suggest that the mechanical action of cavitation bubbles is the dominant factor of particle removal in ultrasonic cleaning, but the bubble collapse resulting from high-intensity ultrasound may be violent enough to give rise to surface erosion. In this paper, we aim to carefully examine the role of cavitation bubbles from ultrasonic cleaning tests with varying dissolved gas concentration in water. In our cleaning tests using 28-kHz ultrasound, oxygen-supersaturated water is produced by oxygen-microbubble aeration and used as a cleaning solution, and glass slides spin-coated with silica particles of micron/submicron sizes are used to define cleaning efficiency. High-speed camera recordings and Particle Image Velocimetry analysis with a pressure oscillation amplitude of 1.4 atm at the pressure antinode show that the population of cavitation bubbles increases and streaming flow inside the bath is promoted, as the dissolved oxygen supersaturation increases. The particle removal is found to be achieved mainly by the action of cavitation bubbles, but there exists optimal gas supersaturation to maximize the removal efficiency. Our finding suggests that low-intensity ultrasound irradiation under the optimal gas supersaturation in cleaning solutions allows for having mild bubble dynamics without violent collapse and thus cleaning surfaces without cavitation erosion. Finally, observations of individual bubble dynamics and the resulting particle removal are reported to further support the role of cavitation bubbles as cleaning agents.

Ultrasonic nano-emulsification - A review

The emulsions with nano-sized dispersed phase is called nanoemulsions having a wide variety of applications ranging from food, dairy, pharmaceutics to paint and oil industries. As one of the high energy consumer methods, ultrasonic emulsification (UE) are being utilized in many processes providing unique benefits and advantages. In the present review, ultrasonic nano-emulsification is critically reviewed and assessed by focusing on the main parameters such pre-emulsion processes, multi-frequency or multi-step irradiations and also surfactant-free parameters. Furthermore, categorizing aposematic data of experimental researches such as frequency, irradiation power and time, oil phase and surfactant concentration and also droplet size and stability duration are analyzed and conceded in tables being beneficial to indicate uncovered fields. It is believed that the UE with optimized parameters and stimulated conditions is a developing method with various advantages.

Acoustic radiation force on a parametrically distorted bubble

The subject of acoustic radiation pressure on a gas bubble is important in many applications because it controls how bubbles are moved by acoustic fields to target locations, and often how they act upon the target. Previous theoretical treatments assume a spherical bubble undergoing linear pulsations, but some (such as cleaning using Faraday waves on the bubble wall) require that the bubble be aspherical. Therefore, this paper derives ways to calculate the variation in the radiation pressure due to the non-spherical bubble oscillations. The magnitude and direction of the radiation force are determined by two factors: the amplitude of volume oscillations, V_m, and the phase relationship between those oscillations and the acoustic field which drives them. There are two key findings that correct for the predictions of a model accounting for only linear pulsations. First, the growth of the radiation force slows down as V_m ceases to increase linearly with increasing amplitude of the acoustic wave above the threshold. Second, although both models show that the direction of the force relative of the standing wave antinode can be attractive or repulsive depending on frequency, when distortion modes are included the frequency at which this force changes its sign is shifted.