Ultrasound assisted synthesis of Bi2NbO5F/rectorite composite and its photocatalytic mechanism insights

Sonochemically assisted the synthesis and catalytic application of bismuth-based photocatalyst: A mini review

Recently, bismuth (Bi)-based photocatalysts have been a well-deserved hotspot in the field of photocatalysis owning to their photoelectrochemical properties driven by the distortion of the Bi 6 s orbital, while their narrow band gap and poor quantum efficiency still restrict their application. With the development of ultrasonic technology, it is expected to become a broom to clear the application obstacles of Bi-based photocatalysts. The special forces and environmental conditions brought by ultrasonic irradiation play beneficial roles in the preparation, modification and performance releasement of Bi-based photocatalysts. In this review, the role and influencing factors of ultrasound in the preparation and modification of Bi-based photocatalysts were introduced. Crucially, the mechanism of the improving the performance for various types of Bi-based photocatalysts by ultrasound in the whole process of photocatalysis was deeply analyzed. Then, the application of ultrasonic synergistic Bi-based photocatalysts in contaminants treatment and energy conversion was briefly introduced. Finally, based on an unambiguous understanding of ultrasonic technology in assisting Bi-based photocatalysts, the future directions and possibilities for ultrasonic synergistic Bi-based photocatalysts are explored.

Harnessing ultrasound in photocatalysis: Synthesis and piezo-enhanced effect: A review

The photocatalytic technique has drawn far-ranging interests in addressing the current issues; however, its property suffers from the limited visible light response and rapid recombination of carriers. To address these issues, two specific approaches have been proposed to enhance the photocatalytic activity: (1) ultrasound-assisted synthesis has been utilized to prepare photocatalysts, resulting in refined grain size, increased specific surface area, and reduced photogenerated carrier recombination; (2) sonophotocatalysis and piezoelectric enhanced photocatalysis have been developed to accelerate the reaction, which utilizes the synergism between ultrasound and light. On one side, sonophotocatalysis generates cavitation bubbles which induce more reactive radicals for redox reactions. On the other side, ultrasound induces deformation of the piezoelectric material structure, which changes the internal piezoelectric potential and improves the photocatalytic performance. Currently, intensive efforts have been devoted to related research and great progress has been reached with applications in pollutant degradation, new energy production, and other fields. This work starts by elucidating the fundamental concept of ultrasound-assisted photocatalyst synthesis and photocatalysis. Then, the synergistic behavior between ultrasonic and light in ultrasonic-assisted photocatalysis has been thoroughly discussed, including pollutant degradation, water splitting, and bacterial sterilization. Finally, the challenge and outlook are investigated and proposed.

Co3O4@chitosan/La2O3 nanocomposites as innovative, powerful, and recyclable nanocatalysts for sonochemical treatment of benzyl alcohols to obtain the corresponding benzaldehyde derivatives

Ultrasonic (US) irradiation (100 W, 40 kHz) reactions, used as a safe and green technique, are often more efficient than traditional protocols. This leads us to introduce, for the first time, an efficient nanocatalyst and immobilization of La₂O₃ nanoparticles on Co₃O₄ nanoparticles for the selective oxidation of benzyl alcohol to the corresponding benzaldehyde at room temperature. The structural and morphological characteristics of the nanocatalysts were determined by FT-IR, XRD, FE-SEM, EDX, and VSM. The catalytic performance of the Co₃O₄@Cs/La₂O₃ composites used as heterogeneous nanocatalysts was investigated in the selective oxidation of benzylic alcohols to their corresponding benzaldehydes. Also, the performance of the oxidation parameters, including H₂O₂ concentration, time, effect of various solvents, and nanocatalyst dosage was checked. Significant benefits of this method can be named by using a non-toxic solvent, easy product isolation, excellent recoverability, low time of reaction, high yield, and ultrasound irradiation. Finally, a possible mechanism was proposed to show the nanocatalytic process.

A review of clay based photocatalysts: Role of phyllosilicate mineral in interfacial assembly, microstructure control and performance regulation

Over the past decades, inspired by the outstanding properties of clay minerals such as abundance, low-cost, environmental benignity, high stability, and regularly arranged silica-alumina framework, researchers put much efforts on the interface assembly and surface modification of natural minerals with bare photocatalysts, i.e. TiO₂, g-C₃N₄, ZnO, MoS₂, etc. The clay-based hybrid photocatalysts have resulted in a rich database for their tailor-designed microstructures, characterizations, and environmental-related applications. Therefore, in this study, we took a brief introduction of three representative minerals, i.e. kaolinite, montmorillonite and rectorite, and discussed their basic merits in photocatalysis applications. After that, we summarized the recent advances in construction of stable visible-light driven photocatalysts based on these minerals. The structure-activity relationships between the properties of clay types, pore structure, distribution/dispersion and light absorption, carrier separation efficiency as well as redox performance were illustrated in detail. Such representative information would provide theoretical basis and scientific support for the application of clay based photocatalysts. Finally, we pointed out the major challenges and future directions at the end of this review. Undoubtedly, control and preparation of novel photocatalysts based on clays will continue to witness many breakthroughs in the arena of solar-driven technologies.

Potential of a sonochemical approach to generate MRI-PPT theranostic agents for breast cancer

The production of nanomaterials integrating diagnostic and therapeutic roles within one nanoplatform is important for medical applications. Such theranostics nanoplatforms could provide information on imaging, accurate diagnosis and, at the same time, could eradicate cancer cells. Fe₃O₄@Au core@shell nanoparticles (Fe₃O₄@AuNPs) have gained broad attention due to their unique innovations in magnetic resonance imaging (MRI) and photothermal therapy (PTT). Seed-mediated growth procedures were used to produce the Fe₃O₄@AuNPs. In these processes, complicated surface modifications, resulted in unsatisfactory properties. This work used the ability of the sonochemical approach to synthesize highly efficient theranostics agent Fe₃O₄@AuNPs with a size of approximately 22 nm in 5 min. The inner core of Fe₃O₄ acts as an MRI agent, whereas the photothermal effect stands accomplished by near-infrared absorption of the gold shell (Au shell), which results in the eradication of cancer cells. We have shown that Fe₃O₄@AuNPs have great biocompatibility and no major cytotoxicity has been identified. Relaxivity value (r₂) of synthesized Fe₃O₄@Au NPs, measured at 233 mM^-1s^-1, is significantly higher than those reported previously. The as-synthesized NPs have shown substantial photothermal ablation ability on MCF-7 in vitro under near-infrared laser irradiation. Consequently, Fe₃O₄@AuNPs synthesized in this study have great potential as an ideal candidate for MR imaging and PTT.

Effect of ultrasonic irradiation power on sonochemical synthesis of gold nanoparticles

In this work, optimized size distribution and optical properties in the colloidal synthesis of gold nanoparticles (GNPs) were obtained using a proposed ultrasonic irradiation assisted Turkevich-Frens method. The effect of three nominal ultrasound (20 kHz) irradiation powers: 60, 150, and 210 W have been analyzed as size and shape control parameters. The GNPs colloidal solutions were obtained from chloroauric acid (HAuCl₄) and trisodium citrate (C₆H₅Na₃O₇·2H₂O) under continuous irradiation for 1 h without any additional heat or stirring. The surface plasmon resonance (SPR) was monitored in the UV-Vis spectra every 10 min to found the optimal time for localized SPR wavelength (λ_LSPR), and the 210 sample procedure has reduced the λ_LSPR localization at 20 min, while 150 and 60 samples have showed λ_LSPR at 60 min. The nucleation and growth of GNPs showed changes in shape and size distribution associated with physical (cavitation, temperature) and chemical (radical generation, pH) conditions in the aqueous solution. The results showed quasi-spherical GNPs as pentakis dodecahedron (λ_LSPR = 560 nm), triakis icosahedron (λ_LSPR = 535 nm), and tetrakis hexahedron (λ_LSPR = 525 nm) in a size range from 12 to 16 nm. Chemical effects of ultrasound irradiation were suggested in the disproportionation process, electrons of AuCl₂^- are rapidly exchanged through the gold surface. After AuCl₄^- and Cl^- were desorbed, a tetrachloroaurate complex was recycled for the two-electron reduction by citrate, aurophilic interaction between complexes AuCl₂^-, electrons exchange, and gold seeds, the deposition of new gold atoms on the surface promoting the growth of GNPs. These mechanisms are enhanced by the effects of ultrasound, such as cavitation and transmitted energy into the solution. These results show that the plasmonic response from the reported GNPs can be tuned using a simple methodology with minimum infrastructure requirements. Moreover, the production method could be easily scalable to meet industrial manufacturing needs.