State-of-the-art on the technique of dispersive liquid-liquid microextraction

From Preformulative Design to In Vivo Tests: A Complex Path of Requisites and Studies for Nanoparticle Ocular Application. Part 1: Design, Characterization, and Preliminary In Vitro Studies

Ocular pathologies are widely diffused worldwide, and their effective treatment, combined with a high patient compliance, is sometimes challenging to achieve due to the barriers of the eye; in this context, the use of nanoparticles for topical ophthalmic application could represent a successful strategy. Aiming to develop nanoplatforms with potential clinical applications, great attention has to be paid to their features, in relation to the route of administration and to the pharmacopoeial requirements. This review (part 1) thus embraces the preliminary steps of nanoparticle development and characterization. At the beginning, the main barriers of the eye and the different administration routes are resumed, followed by a general description of the advantages of the employment of nanoparticles for ocular topical administration. Subsequently, the preformulative steps are discussed, deepening the choice of raw materials and determining the quantitative composition. Then, a detailed report of the physicochemical and technological characterization of nanoparticles is presented, analyzing the most relevant tests that should be performed on nanoparticles to verify their properties and the requisites (both mandatory and suggested) demanded by regulatory agencies. In conclusion, some preliminary noncellular in vitro evaluation methods are described. Studies from in vitro cellular assays to in vivo tests will be discussed in a separate (part 2) review paper. Hence, this overview aims to offer a comprehensive tool to guide researchers in the choice of the most relevant studies to develop a nanoplatform for ophthalmic drug administration.

Food profiling goes green: Sustainable analysis strategies for food authentication

Omics technologies, such as genomics, proteomics, metabolomics, isotopolomics, and metallomics, are important tools for analytical verification of food authenticity. However, in many cases, their application requires the use of high-resolution technological platforms as well as careful consideration of sample collection, storage, preparation and, in particular, extraction. In this overview, the individual steps and disciplines are explained against the background of the term "Green Chemistry," and the various instrumental procedures for the respective omics disciplines are discussed. Furthermore, new approaches and developments are presented on how such analyses can be made sustainable in the future.

Simultaneous determination of 78 pesticide residues and 16 mycotoxins in tsampa by an improved QuEChERS method coupled with ultra performance liquid chromatography-tandem mass spectrometry

Tsampa may contain pesticide residues and mycotoxins, which may pose a risk to human health. Currently, pesticide detection and mycotoxin detection are two independent experiments. To improve the efficiency of the analysis, a method based on QuEChERS combined with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for the simultaneous determination of 78 pesticides and 16 mycotoxins in tsampa was developed. All the target compounds showed good linear correlation with correlation coefficients (R2) greater than 0.9990. The limits of detection (LODs) and limits of quantification (LOQs) were in the ranges of 0.10-3.00 μg kg-1 and 0.40-10.00 μg kg-1, respectively. The average recoveries of the pesticides and mycotoxins spiked at the 1, 2, and 10-fold LOQ were in the range of 73.0-115.2%, and the relative standard deviations (RSDs) were lower than 11.7%. This method was applied to 19 batches of real samples in which 32% of samples exceeded the maximum residue limits of the European Union involving aflatoxin G2, ochratoxin A, and hexaconazole. It proved to be excellent, efficient, greatly simplified, and highly applicable, which could reduce the workload and time significantly for the daily monitoring of the pesticides and mycotoxins in tsampa.

Dihydroxyl modified UiO-66 as dispersive solid-phase extraction sorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry for detection of neonicotinoid insecticides

The extensive usage of neonicotinoid insecticides (NIs) has raised many concerns about their potential harm to environment and human health. Thus, it is of great importance to develop an efficient and reliable method to determine NIs in food samples. In this work, three Zr4+-based metal-organic frameworks functionalized with various numbers of hydroxyl groups were fabricated with a facile one-pot solvothermal method. Among them, dihydroxy modified UiO-66 (UiO-66-(OH)2) exhibited best adsorption performance towards five target NIs. Then, a sensitive and efficient method for detection of NIs from vegetable and fruit samples was established based on dispersive solid phase extraction (dSPE) with UiO-66-(OH)2 as adsorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Key parameters affecting the dSPE procedure including amounts of adsorbent, adsorption time, eluent solvents and desorption time were investigated. Under the optimal conditions, rapid adsorption of NIs within five minutes was achieved due to the high affinity of UiO-66-(OH)2 towards NIs. The developed method exhibited high sensitivity with limits of detection (LODs) varied from 0.003 to 0.03 ng/mL and wide linearity range over 3-4 orders of magnitude from 0.01 to 500 ng/mL. Furthermore, the established method was applied for determining trace NIs from complex matrices with recoveries ranging from 74.6 to 99.6 % and 77.0-106.8 % for pear and tomato samples, respectively. The results indicate the potential of UiO-66-(OH)2 for efficient enrichment of trace NIs from complex matrices.

Preconcentration of Heterocyclic Aromatic Amines in Edible Fried Insects Using Surfactant-Assisted Hydrophobic Deep Eutectic Solvent for Homogeneous Liquid-Liquid Microextraction prior to HPLC

Thermal processing techniques are often accompanied by the production of many harmful compounds such as heterocyclic aromatic amines (HAAs). To protect human health, an efficient and environmentally friendly method, namely, homogeneous liquid-liquid microextraction (HLLME), was investigated. This method is based on a surfactant-assisted hydrophobic deep eutectic solvent for the determination of HAAs in edible fried insect samples prior to their analysis by high-performance liquid chromatography coupled with UV detection. A hydrophobic deep eutectic solvent (as extraction solvent) was synthesized using decanoic acid as a hydrogen bond donor and tetrabutylammonium bromide (TBABr) as a hydrogen bond acceptor and then characterized by Fourier transform infrared (FTIR) spectroscopy. The surfactant was used as the emulsifier and induces mass transfer, resulting in an increasing extraction efficiency of the proposed method. Various factors affecting the extraction performance were investigated and optimized. A matrix-match calibration method was used to analyze HAAs in high heat-treated edible fried insect samples. Under optimized conditions, the proposed method showed good linearity (R2 ≥ 0.99) with satisfactory limits of detection and satisfactory reproducibility with relative standard deviation of less than 10.0%. Furthermore, the procedure greenness was assessed using the Analytical Eco-Scale. This paper represents the first application of HLLME based on a surfactant-assisted hydrophobic deep eutectic solvent to analyze HAAs in edible fried insect samples.

Recent Advances in Dispersive Liquid-Liquid Microextraction for Pharmaceutical Analysis

Sample clean-up and pre-concentration are critical components of pharmaceutical analysis. The dispersive liquid-liquid microextraction (DLLME) technique is widely recognized as the most effective approach for enhancing overall detection sensitivity. While various DLLME modes have been advanced in pharmaceutical analysis, there need to be more discussions on pre-concentration techniques specifically developed for this field. This review presents a comprehensive overview of the different DLLME modes used in pharmaceutical analysis from 2017 to May 2023. The review covers the principles of DLLME, the factors affecting microextraction, the selected applications of different DLLME modes, and their advantages and disadvantages. Additionally, it focuses on multi-extraction strategies employed for pharmaceutical analysis.

Purification processes of polymeric nanoparticles: How to improve their clinical translation?

Polymeric nanoparticles, as revolutionary nanomedicines, have offered a new class of diagnostic and therapeutic solutions for a multitude of diseases. With its immense potential, the world witnesses the new age of nanotechnology after the COVID-19 vaccines were developed based on nanotechnology. Even though there are countless benchtop research studies in the nanotechnology world, their integration into commercially available technologies is still restricted. The post-pandemic world demands a surge of research in the domain, which leaves us with the fundamental question: why is the clinical translation of therapeutic nanoparticles so restricted? Complications in nanomedicine purification, among other things, are to blame for the lack of transference. Polymeric nanoparticles, owing to their ease of manufacture, biocompatibility, and enhanced efficiency, are one of the more explored domains in organic-based nanomedicines. Purification of nanoparticles can be challenging and necessitates tailoring the available methods in accordance with the polymeric nanoparticle and impurities involved. Though a number of techniques have been described, there are no available guidelines that help in selecting the method to better suit our requirements. We encountered this difficulty while compiling articles for this review and looking for methods to purify polymeric nanoparticles. The currently accessible bibliography for purification techniques only provides approaches for a specific type of nanomaterial or sometimes even procedures for bulk materials, that are not fully relevant to nanoparticles. In our research, we tried to summarize the available purification techniques using the approach of A.F. Armington. We divided the purification systems into two major classes, namely: phase separation-based techniques (based on the physical differences between the phases) and matter exchange-based techniques (centered on physicochemical induced transfer of materials and compounds). The phase separation methods are based on either using nanoparticle size differences to retain them on a physical barrier (filtration techniques) or using their densities to segregate them (centrifugation techniques). The matter exchange separation methods rely on either transferring the molecules or impurities across a barrier using simple physicochemical phenomena, like the concentration gradients (dialysis method) or partition coefficients (extraction technique). After describing the methods in detail, we highlight their advantages and limitations, mainly focusing on preformed polymer-based nanoparticles. Tailoring a purification strategy takes into account the nanoparticle structure and its integrity, the method selected should be suited for preserving the integrity of the particles, in addition to conforming to the economical, material and productivity considerations. In the meantime, we advocate the use of a harmonized international regulatory framework to define the adequate physicochemical and biological characterization of nanomedicines. An appropriate purification strategy serves as the backbone to achieving desired characteristics, in addition to reducing variability. As a result, the present review aspires to serve as a comprehensive guide for researchers, who are new to the domain, as well as a synopsis of purification strategies and analytical characterization methods used in preclinical studies.

Quantitative determination of bromochloroacetamide in mice urine by gas chromatography combined with salting-out assisted dispersive liquid-liquid microextraction

Bromochloroacetamide (BCAcAm) is the main haloacetamide (HAcAm) detected in drinking water in different regions and exhibits strong cytotoxicity and genotoxicity. However, there is no appropriate method for detecting BCAcAm in urine or other biological samples, and thus, the internal exposure level in the population cannot be accurately assessed. In this study, a gas chromatography-electron capture detector (GC-ECD) was combined with salting-out assisted dispersive liquid-liquid microextraction (SA-DLLME) to develop a rapid and robust method for BCAcAm detection in urine of mice continuously exposed to BCAcAm. The factors influencing the pre-treatment procedure, including the type and volume of extraction and disperser solvents, extraction and standing time, and the amount of salt, were evaluated systematically. Under the optimised conditions, the analyte achieved good linearity in the spiked concentration range of 1.00-400.00 μg L^-1, and the correlation coefficient was higher than 0.999. The limit of detection (LOD) and the limit of quantification (LOQ) were 0.17 μg L^-1 and 0.50 μg L^-1, respectively. The recoveries ranged from 84.20% to 92.17%. The detection of BCAcAm at three different calibration levels using this method afforded an intra-day precision of 1.95-4.29%, while the inter-day precision range was 5.54-9.82% (n = 6). This method has been successfully applied to monitor the concentration of BCAcAm in mouse urine in toxicity experiments and can provide technical support for assessing human internal exposure levels and health risks in later studies.

Room temperature fabrication of magnetic covalent organic frameworks for efficient enrichment of parabens in water

A novel 4 + 2 covalent magnetic organic framework (COF) with core-shell structure was synthesized for the first time with N, N, N', N'-Tetrakis (4-aminophenyl)-1, 4- benzenediamine (TPDA) and 2, 6-Pyridinedicarboxaldehyde (PCBA) at room temperature. The synthesized magnetic TPDA-PCBA-COF has a large specific surface area and superparamagnetism, which makes it an ideal sorbent for trace analytes enrichment. To this end, we combined it with magnetic solid phase extraction (MSPE) to enrich trace parabens in environmental water. The parameters affecting the enrichment efficiency of magnetic solid phase extraction, such as the amount of Fe₃O₄@TPDA-PCBA-COF, extraction time, pH of samples, salt concentration, desorption solvent volume and desorption time, were optimized. A simple method for extraction and determination of parabens in water samples by MSPE combined with high performance liquid chromatography (HPLC) was established under optimized conditions. The validation results revealed that the linear ranges were at 1.0-5.0 × 10² ng mL^-1 with R value between 0.9915 and 0.9999, the spiked recoveries were in the range of 82.8% to 99.9% and RSDs were lower than 10%. The method was further applied to the determination of parabens in water samples, with recoveries in the range of 82.2% to 110.0% and RSDs ≤ 7.7%. These results suggest that the magnetic TPDA-PCBA-COF could be used as a promising adsorbent for efficient extraction and quantitation of parabens in environmental water samples.

Quantitative Analysis of Camellia oleifera Seed Saponins and Aqueous Two-Phase Extraction and Separation

At present, the technology used for the extraction and purification of Camellia oleifera saponins generally has the problems of high cost and low purity, and the quantitative detection of Camellia oleifera saponins also has the problems of low sensitivity and easy interference from impurities. To solve these problems, this paper aimed to use liquid chromatography for the quantitative detection of Camellia oleifera saponins, and to adjust and optimize the related conditions. In our study, the average recovery of Camellia oleifera saponins obtained was 100.42%. The RSD of precision test was 0.41%. The RSD of the repeatability test was 0.22%. The detection limit of the liquid chromatography was 0.06 mg/L, and the quantification limit was 0.2 mg/L. In order to improve the yield and purity, the Camellia oleifera saponins were extracted from Camellia oleifera Abel. seed meal by methanol extraction. Then, the extracted Camellia oleifera saponins were extracted with an ammonium sulfate/propanol aqueous two-phase system. We optimized the purification process of formaldehyde extraction and aqueous two-phase extraction. Under the optimal purification process, the purity of Camellia oleifera saponins extracted by methanol was 36.15%, and the yield was 25.24%. The purity of Camellia oleifera saponins obtained by aqueous two-phase extraction was 83.72%. Thus, this study can provide a reference standard for rapid and efficient detection and analysis of Camellia oleifera saponins for industrial extraction and purification.

Supported liquid extraction and ultra-high performance liquid chromatography-tandem mass spectrometry for the determination of urinary polycyclic aromatic hydrocarbon metabolites and their application for human biomonitoring

Polycyclic aromatic hydrocarbons (PAHs) are a class of highly lipophilic and ubiquitous, persistent organic pollutants with carcinogenic and mutagenic toxicities. They are a great public health concern, and avoiding exposure to them is a high priority. Human biomonitoring is critical for the evaluation of exposure levels to PAHs by the general population. In this work, we demonstrated the biomonitoring of eleven hydroxylated PAHs (OHPAHs) in urine samples from 226 volunteers from Guangzhou, and evaluated the health risks. The urinary PAH metabolites were released by enzymatic deconjugation, separated, and enriched by supported liquid extraction, and then quantified by ultra-high performance liquid chromatography-tandem mass spectrometry. The limit of quantification of the individual OHPAHs ranged from 10 ng/L to 40 ng/L, and satisfactory recoveries were obtained, ranging from 92.6% to 97.6%. The detection frequencies of the OHPAHs were 100%, and naphthalene metabolites were found at the highest concentrations with a geometric mean of 8.61 μg/L. The mean total OHPAH level in the urine samples of males (13.2 μg/L) was significantly higher than that of females (5.84 μg/L). Pearson correlation analyses indicated significant and positive correlations among urinary OHPAHs. The total estimated daily intake of PAHs was calculated, and a low health risk was obtained by evaluating their hazard quotients and hazard indexes.

A critical review of selected preconcentration techniques used for selenium determination in analytical samples

Selenium (Se) is considered to be an essential trace element needed for all living organisms. The importance, deficiency, and toxic effects of Se mainly depend on its quantity and chemical nature. It has been observed that the inorganic versions of Se are more hazardous than the organic versions. This review is mainly focused on the application of different extraction methods used for Se extraction and determination such as microextraction, solid-phase extraction (SPE), and their modified modes in the last 12 years. The use of different dispersive medium (magnetic field, ultrasonic radiation, and vortex agitator) to enhance Se separation is also part of this review. The usage of environmentally friendly solvents such as supramolecular solvents, hydrophobic deep eutectic solvents (DESs), and ionic liquids (ILs) are also the focus of attention in this review. This review is also emphasized the application of advanced microextraction methods, particularly liquid-phase microextraction (LPME). The most recent advances in LPME extraction techniques for Se in various environmental samples, as well as their prospects, are reviewed. Additionally, a summary of cheap, simple, and accurate techniques that have not yet been used to determine small amounts of Se has been provided.

Simultaneous Dispersive Liquid-Liquid Microextraction and Determination of Different Polycyclic Aromatic Hydrocarbons in Surface Water

Polycyclic aromatic hydrocarbons (PAHs) are a class of persistent organic pollutants of water, and their determination at trace levels in the aquatic ecosystems is essential. In this work, an ultrasound-assisted dispersive liquid-liquid microextraction (DLLME) procedure was suggested utilizing a binary dispersive agent for recovery of different molecular weight polycyclic aromatic hydrocarbons (PAHs) from waters. The detection was carried out by gas chromatography-mass spectrometry (GC-MS) as well as high-performance liquid chromatography with fluorescence and diode-array detection (HPLC-FD/PDA). The method was optimized for the extraction of analytes with respect to the mixture composition, ratios of components, ultrasonication time and centrifugation parameters. The analytical schemes for PAHs extraction from water samples using different ratios of extraction and dispersive solvents are reported. The mixture consisting of chloroform and methanol was applied for the extraction of PAHs containing two or three fused aromatic rings; the mixture of chloroform and acetonitrile is suitable for PAHs containing more than four aromatic rings. The mixture of chloroform:acetone + acetonitrile was applied in the universal scheme and allowed for the simultaneous extraction of 20 PAHs with different structures. The developed sample preparation schemes were combined with GC-MS and HPLC-FD/PDA, which allowed us to determine the analytes at low concentrations (from 0.0002 µg/L) with the recoveries exceeding 80% and relative standard deviations of about 8%. The developed methods for the determination of 20 PAHs were applied to the analysis of water samples from the Karasun Lake (Krasnodar), Azov Sea (Temryuk) and Black Sea (Sochi).

Rapid and reliable detection and quantification of organophosphorus pesticides using SERS combined with dispersive liquid-liquid microextraction

Rapid and reliable detection and quantification of pesticide residues in complex matrices by surface enhanced Raman spectroscopy (SERS) remain challenging due to the low level of target molecules and the interference of nontarget components. In this study, SERS was combined with dispersive liquid-liquid microextraction (DLLME) to develop a rapid and reliable method for the detection of organophosphorus pesticides (OPPs). In this method, DLLME was used to extract and enrich two representative OPPs (triazophos and parathion-methyl) from a liquid sample, and a portable Raman spectrometer was used to analyze the separated sediment using homemade gold nanoparticles colloids as enhancing substrates. The results showed that the developed method displayed good sensitivity and stability for the detection and quantification of triazophos and parathion-methyl with R² ≥ 0.98. The calculated limits of detection (LODs) in the simultaneous detection of triazophos and parathion-methyl were 2.17 × 10^-9 M (0.679 ppb) and 2.28 × 10^-8 M (5.998 ppb), and the calculated limits of quantification (LOQs) were 7.23 × 10^-9 M (2.26 ppb) and 7.62 × 10^-8 M (19.098 ppb), respectively. Furthermore, the developed SERS method was successfully applied to the detection of triazophos and parathion-methyl in apple juice with recoveries between 78.07% and 110.87% and relative standard deviations (RSDs) ≤ 2.06%. Therefore, the developed DLLME facilitated liquid SERS method exhibited good sensitivity and stability for the rapid detection and quantification of OPPs and had the potential to be applied to the rapid detection of OPPs in complex matrices.

Recent modified air-assisted liquid–liquid microextraction applications for medicines and organic compounds in various samples: A review

Air-assisted liquid–liquid microextraction (AALLME) is a procedure for sample preparation that has high recoveries and high preconcentration factors while using a small amount of extractants. This procedure has gained widespread acceptance among scientists due to a variety of advantages, including its easiness, being cheap, green, and available in most laboratories. The current review has focused on the analysis of medicines and organic compounds using various modes of AALLME. The use of various extractants and support factors were developed in many modes of AALLME. A review of literature revealed that the procedure is used as a powerful and efficient approach for extracting medicals and organic compounds. This review explained 12 different types of AALLME methods. The findings on the modifications of AALLME modes that have been published are summarized. Future directions are also being discussed.

Popping candy-assisted dispersive liquid-liquid microextraction for enantioselective determination of prothioconazole and its chiral metabolite in water, beer, Baijiu, and vinegar samples by HPLC

To simultaneously determine the enantiomers of prothioconazole and its chiral metabolite prothioconazole-desthio in water, beer, Baijiu, and vinegar samples by HPLC, a simple, fast, environmentally-friendly popping candy-assisted dispersive liquid-liquid microextraction technique was developed. A green medium-chain fatty acid (decanoic acid) and popping candy could be used as the extractant and solid dispersant respectively to avoid the use of toxic organic solvents. Decanoic acid was collected after extraction by solidification at room temperature. The linear range of this technique was from 27.1 to 1000 µg L^-1. The limits of detection and quantification were within the ranges of 8.1-11.2 μg L^-1 and 27.1-37.3 μg L^-1, respectively. The extraction recovery was 80.8% to 102.5% with the relative standard deviation ranged from 1.1 to 7.1%. This technique has been successfully applied to enantioselectively determine the residues of prothioconazole and prothioconazole-desthio in water, beer, Baijiu, and vinegar samples.

Hydrophobic deep eutectic solvent-based ultrasonic-assisted liquid-liquid micro-extraction combined with HPLC-FLD for diphenylamine determination in fruit

In this paper, novel high extraction efficiency hydrophobic eutectic solvents (DESs), n-octanoic acid as a hydrogen bond donor (HBD) and menthol as a hydrogen bond acceptor (HBA), were selected from five hydrophobic DESs to extract trace diphenylamine (DPA) in fruits apple, pear and orange under ultrasonic-assisted liquid-liquid micro-extraction (UA-LLME) technology before high-performance liquid chromatography (HPLC) analysis. Working parameters such as the DESs type, molar ratio, extractant volume, and ultrasonic time of the LLME hydrophobic DESs technology were optimised. Average recoveries between 96% and 108% were obtained on actual samples. This method gave lower detection limit (LOD) than other existing methods due to combining the high-efficiency extraction of hydrophobic DES and high sensitivity of fluorescence detector. This method was sensitive and eco-friendly, and can be used for the determination of trace components in fruits.

A new derivatization method for the determination of propineb in black tea and infant formula samples using dispersive liquid-liquid microextraction followed by gas chromatography-mass spectrometry

A novel derivatization method for the determination of propineb by gas chromatography-mass spectrometry (GC-MS) was developed in this study. This was achieved by isothiocyanate derivatization of the analyte by potassium persulfate and potassium carbonate in water medium. Dispersive liquid-liquid microextraction (DLLME) was employed to isolate and preconcentrate the derivatized analyte into an organic phase. All method parameters including concentration/volume of potassium persulfate and potassium carbonate salts, type/period of mixing for derivatization reaction and microextraction process were systematically optimized to lower the detection limit. Under the optimum experimental conditions, the limit of detection (LOD) and limit of quantitation (LOQ) values were calculated as 0.15 mg/kg and 0.52 mg/kg, respectively. The developed method was checked for its accuracy and applicability by spiking black tea and infant formula samples, and the respective percent recovery results were found to be in the range of 99-102% and 98-103%, respectively.

Sequential extraction and enrichment of pesticide residues in Longan fruit by ultrasonic-assisted aqueous two-phase extraction linked to vortex-assisted dispersive liquid-liquid microextraction prior to high performance liquid chromatography analysis

A simple, green and efficient method for extraction, purification and enrichment of pesticide residues of triazoles and pyrethroids in Longan fruit was developed by ultrasonic-assisted aqueous two-phase extraction (UAATPE) coupled to vortex-assisted dispersive liquid-liquid microextraction (VADLLME). Using an aqueous two-phase system (ATPS) of ethanol/K₂HPO₄ as extraction solvent, the composition of the ATPS, extraction temperature and time were investigated, respectively. Then VADLLME process also was optimized by investigating type and volume of extracting and dispersive solvents, vortex-assisted time and salt addition. The optimum conditions were as follows: the ATPS composition of ethanol concentration 30.0% (w/w) and K₂HPO₄ concentration 25% (w/w), extraction temperature 70 °C and extraction time 15 min for UAATPE; 1-dodecanol 200 μL as extraction solvent, ethanol 1.25 mL as dispersive solvent, vortex-assisted time 1.5 min and addition of NaCl 4% (w/v) for VADLLME. Ethanol as extraction solvent and dispersive solvent could directly connect UAATPE with VADLLME without extra steps. By means of HPLC-DAD detection, nine pesticides had good linearity ranged from 0.0200 to 13.59 μg/mL (R² ≥ 0.9957). LODs and LOQs were in the range of 0.005576-0.01740 μg/mL and 0.01859-0.05010 μg/mL, respectively. UAATPE-VADLLME coupled to HPLC was successfully applied to simultaneous determination of multiple pesticides in Longan fruit, and mean recoveries and RSDs were between 76.95% and 98.63%, 1.2% and 9.8%, respectively. Furthermore, myclobutanil, fenpropathrin and deltamethrin were detected in pericarp and pulp of Longan samples from different districts, respectively.

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplets for HPLC determination of three strobilurin fungicides in cereals

In this paper, a dispersive liquid-liquid microextraction method based on the solidification of floating organic droplets, combined with high-performance liquid chromatography (DLLME-SFOD-HPLC), was developed for the detection of strobilurin fungicides (azoxystrobin, pyraclostrobin, and trifloxystrobin) in cereals. Natural fatty acids were used as an extractant and have low toxicity, density, and freezing point. The extractant nonanoic acid was evenly dispersed as droplets in sample solution and was then solidified in the upper layer of sample solution after centrifugation and ice bath, which improved the extraction and collection efficiency. The dispersive liquid-liquid microextraction procedure was optimised by univariate analysis and the Box-Behnken response surface methodology. Optimum conditions were as follows: the volume of nonanoic acid was 82 μL, the volume of acetonitrile was 620 μL, and the amount of salt was 256 mg. Under optimised conditions, the method had good linearity with a correlation coefficient higher than 0.997, and the limit of detection was 2.57-4.87 μg kg^-1. The recoveries of azoxystrobin, pyraclostrobin, and trifloxystrobin in rice, corn, and wheat were 82.0%-93.2%, and the relative standard deviations were 1.6%-7.4%. Therefore, the method was successfully applied to detect target fungicides in cereals.

Hydrophilic interaction chromatography combined with ultrasound-assisted ionic liquid dispersive liquid-liquid microextraction for determination of underivatized neurotransmitters in dementia patients' urine samples

A sensitive, rapid, precise and specific analytical method of hydrophilic interaction ultra-performance liquid chromatography coupled with triple-quadrupole linear ion-trap tandem mass spectrometry (HILIC-UHPLC-QTRAP®/MS²) combined with a high-efficiency and easy sample preparation technology of ultrasound-assisted ionic liquid dispersive liquid-liquid microextraction (UA-IL-DLLME) was developed to investigate neurotransmitters (NTs) in mild cognitive impairment, mild dementia and moderate dementia patients' urine samples. Firstly, the UA-IL-DLLME parameters were optimized using Plackett-Burman screening and rotatable central composite design, and the main optimal conditions were obtained: ultrasound power of 307 W, ultrasound time of 4.3 min and agitation time of 4.8 min. Secondly, HILIC-UHPLC-QTRAP®/MS² method was developed to simultaneously determine 15 underivatized NTs in urine samples. The analysis results of clinical samples showed that some NTs such as γ-aminobutyric acid (GABA), acetylcholine (Ach) and glutamic acid (Glu) presented significant differences in different dementia stages. Finally, multivariate analysis based on the combination of principal component analysis and supervised counter propagation artificial neural network was developed for comprehensive analysis of the obtained clinical data sets. As a result, GABA and Glu were simultaneously presented meaningful contribution for classification of samples, and might be considered as potential differential compounds to the urine samples from cluster patients with different dementia stages. In summary, the presented strategy of preparation, analysis and statistics might be used to investigate NTs in different clinical biological fluids.