Ultrasonically-assisted surface modified TiO2/rGO/CeO2 heterojunction photocatalysts for conversion of CO2 to methanol and ethanol

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

High Selectivity Fuel from Efficient CO2 Conversion by Zn-Modified rGO and Amine-Functionalized CuO as a Photocatalyst

Reduced graphene oxide (rGO) has been used in copper (II) oxide (CuO)-based photocatalysts as an additive material. An application of this CuO-based photocatalyst is in the CO₂ reduction process. The preparation of rGO by a Zn-modified Hummers' method has resulted in a high quality of rGO in terms of excellent crystallinity and morphology. However, implementing Zn-modified rGO in CuO-based photocatalysts for the CO₂ reduction process has yet to be studied. Therefore, this study explores the potential of combining Zn-modified rGO with CuO photocatalysts and performing these rGO/CuO composite photocatalysts to convert CO₂ into valuable chemical products. The rGO was synthesized by using a Zn-modified Hummers' method and covalently grafted with CuO by amine functionalization with three different compositions (1:10, 1:20, and 1:30) of rGO/CuO photocatalyst. XRD, FTIR, and SEM were used to investigate the crystallinity, chemical bonds, and morphology of the prepared rGO and rGO/CuO composites. The performance of rGO/CuO photocatalysts for the CO₂ reduction process was quantitively measured by GC-MS. We found that the rGO showed successful reduction using a Zn reducing agent. The rGO sheet could be grafted with CuO particles and resulted in a good morphology of rGO/CuO, as shown from the XRD, FTIR, and SEM results. The rGO/CuO material showed photocatalytic performance due to the advantages of synergistic components and resulted in methanol, ethanolamine, and aldehyde as fuel with amounts of 37.12, 8730, and 17.1 mmol/g catalyst, respectively. Meanwhile, adding CO₂ flow time increases the resulting quantity of the product. In conclusion, the rGO/CuO composite could have potential for large-scale CO₂ conversion and storage applications.

Recent Progress in Metal Oxide-Based Photocatalysts for CO2 Reduction to Solar Fuels: A Review

One of the challenges in developing practical CO₂ photoconversion catalysts is the design of materials with a low cost, high activity and good stability. In this paper, excellent photocatalysts based on TiO₂, WO₃, ZnO, Cu₂O and CeO₂ metal oxide materials, which are cost-effective, long-lasting, and easy to fabricate, are evaluated. The characteristics of the nanohybrid catalysts depend greatly on their architecture and design. Thus, we focus on outstanding materials that offer effective and practical solutions. Strategies to improve CO₂ conversion efficiency are summarized, including heterojunction, ion doping, defects, sensitization and morphology control, which can inspire the future improvement in photochemistry. The capacity of CO₂ adsorption is also pivotal, which varies with the morphological and electronic structures. Forms of 0D, 1D, 2D and 3DOM (zero/one/two-dimensional- and three-dimensional-ordered macroporous, respectively) are involved. Particularly, the several advantages of the 3DOM material make it an excellent candidate material for CO₂ conversion. Hence, we explain its preparation method. Based on the discussion, new insights and prospects for designing high-efficient metallic oxide photocatalysts to reduce CO₂ emissions are presented.

Constructing Active Sites on Self-Supporting Ti3C2Tx (T = OH) Nanosheets for Enhanced Photocatalytic CO2 Reduction into Alcohols

Ti3C2Tx (T = OH) was first prepared from Ti3AlC2 by HF etching and applied into a photocatalytic CO2 reduction. Then, the Ti3C2Tx nanosheets present interbedded a self-supporting structure and extended interlayer spacing. Meanwhile, the Ti3C2Tx nanosheets are decorated with abundant oxygen-containing functional groups in the process of etching, which not only serve as active sites but also show efficient charge migration and separation. Among Ti3C2Tx materials prepared by etching for different times, Ti3C2Tx-36 (Etching time: 36 h) showed the best performance for photoreduction of CO2 into alcohols (methanol and ethanol), giving total yield of 61 μmol g catal.−1, which is 2.8 times than that of Ti3AlC2. Moreover, excellent cycling stability for CO2 reduction is beneficial from the stable morphology and crystalline structure. This work provided novel sights into constructing surface active sites controllably.

Photocatalytic CO2 Conversion to Ethanol: A Concise Review

Photo-catalytically converting the greenhouse gas CO2 into ethanol is an important avenue for the mitigation of climate issues and the utilization of renewable energies. Catalysts play critical roles in the reaction of photocatalytic CO2 conversion to ethanol, and a number of catalysts have been investigated, including semiconductors and plasmonic metal-based catalysts, as well as several other catalysts. In this review, the progress in the development of each category of catalysts is summarized, the current status is reviewed, the remaining challenges are pointed out, and the future research directions are prospected, with the aim being to pave pathways for the rational design of better catalysts.

Ultrasonically assisted surface modified CeO2 nanospindle catalysts for conversion of CO2 and methanol to DMC

This study developed a facile and effective approach to engineer the surface properties of cerium oxide (CeO₂) nanospindle catalysts for the direct synthesis of dimethyl carbonate (DMC) from CO₂ and methanol. CeO₂ nanospindles were first prepared by a simple precipitation method followed by wet chemical redox etching with sodium borohydride (NaBH₄) under high intensity ultrasonication (ultrasonic horn, 20 kHz, 150 W/cm²). The ultrasonically assisted surface modification of the CeO₂ nanospindles in NaBH₄ led to particle collisions and surface reduction that resulted in an increase in the number of surface-active sites of exposed Ce³⁺ and oxygen vacancies. The surface modified CeO₂ nanospindles showed an improvement of catalytic activity for DMC formation, yielding 17.90 mmol·g_cat^-1 with 100 % DMC selectivity. This study offers a simple and effective method to modify a CeO₂ surface, and it can further be applied for other chemical activities.

Recent Advances of Photocatalytic Hydrogenation of CO2 to Methanol

Constantly increasing hydrocarbon fuel combustion along with high levels of carbon dioxide emissions has given rise to a global energy crisis and environmental alterations. Photocatalysis is an effective technique for addressing this energy and environmental crisis. Clean and renewable solar energy is a very favourable path for photocatalytic CO2 reduction to value-added products to tackle problems of energy and the environment. The synthesis of various products such as CH4, CH3OH, CO, EtOH, etc., has been expanded through the photocatalytic reduction of CO2. Among these products, methanol is one of the most important and highly versatile chemicals widely used in industry and in day-to-day life. This review emphasizes the recent progress of photocatalytic CO2 hydrogenation to CH3OH. In particular, Metal organic frameworks (MOFs), mixed-metal oxide, carbon, TiO2 and plasmonic-based nanomaterials are discussed for the photocatalytic reduction of CO2 to methanol. Finally, a summary and perspectives on this emerging field are provided.

One-Step Hydrothermal Synthesis of Precious Metal-Doped Titanium Dioxide-Graphene Oxide Composites for Photocatalytic Conversion of CO2 to Ethanol

We utilized a one-step hydrothermal process for the synthesis of precious metal-doped titanium dioxide (TiO₂)/graphene oxide (GO) composites. The metal-doped TiO₂/GO composites, including silver-TiO₂/GO (Ag-TiO₂/GO), palladium-TiO₂/GO (Pd-TiO₂/GO), and copper-TiO₂/GO (Cu-TiO₂/GO), were synthesized by mixing a metal precursor, titanium butoxide, and graphene oxide in a water-ethanol mixture in an autoclave hydrothermal reactor. The photocatalytic performance of the composites was tested in the photoreduction of carbon dioxide (CO₂) to ethanol. Ag-TiO₂/GO, Pd-TiO₂/GO, and Cu-TiO₂/GO exhibited an ethanol production rate of 109, 125, and 233 μmol/g_cat h, respectively. The outstanding performances of Cu-TiO₂/GO can be attributed to a combined effect of key parameters, including optical band gap, crystallite size, and BET surface area.

An Insight into Geometries and Catalytic Applications of CeO2 from a DFT Outlook

Rare earth metal oxides (REMOs) have gained considerable attention in recent years owing to their distinctive properties and potential applications in electronic devices and catalysts. Particularly, cerium dioxide (CeO2), also known as ceria, has emerged as an interesting material in a wide variety of industrial, technological, and medical applications. Ceria can be synthesized with various morphologies, including rods, cubes, wires, tubes, and spheres. This comprehensive review offers valuable perceptions into the crystal structure, fundamental properties, and reaction mechanisms that govern the well-established surface-assisted reactions over ceria. The activity, selectivity, and stability of ceria, either as a stand-alone catalyst or as supports for other metals, are frequently ascribed to its strong interactions with the adsorbates and its facile redox cycle. Doping of ceria with transition metals is a common strategy to modify the characteristics and to fine-tune its reactive properties. DFT-derived chemical mechanisms are surveyed and presented in light of pertinent experimental findings. Finally, the effect of surface termination on catalysis by ceria is also highlighted.

CeO2/CuO/TiO2heterojunction photocatalysts for conversion of CO2to ethanol

An attempt to reduce CO₂emissions has led to the development of CeO₂/CuO/TiO₂heterojunction photocatalysts for photoconversion of CO₂to useful products, e.g. ethanol. Composite photocatalysts were simply prepared by mixing TiO₂(P25) with different mass ratios of CeO₂(1 wt%) and CuO (2 or 3 wt%) by ball milling. The prepared photocatalysts had uniformly distributed CeO₂and CuO phases, throughout the TiO₂phase. The integration of CeO₂and CuO into TiO₂at 1 wt% CeO₂and 3 wt% CuO produced a composite, with a reduced band gap of 2.88 eV, allowing absorption of lower energy light and a lower electron-hole recombination rate. The 1%CeO₂/3%CuO/TiO₂photocatalysts yielded ethanol at 30.5μmol g_cat^-1h^-1, almost three times higher than the yield from pure TiO₂. This improved CO₂conversion efficiency was due to contributions from properties of both additives: CeO₂increased light absorption, while CuO acted as an electron trap and enhanced CO₂adsorption. In addition, the heterojunction at the interfaces facilitated the photogenerated charge separation, which, in turn, increased the charge participation in the catalyzed conversion reactions.

Visible light assisted production of methanol from CO2 using CdS@CeO2 heterojunction

The production of methanol from CO₂ is highly desirable in present scenario due to the excessive CO₂ emission. Several photocatalytic materials have been developed for reduction of CO₂ into methanol under mild conditions, but things need to be developed soon. In the present work, the solvothermal process had synthesized high surface area CeO₂ supported CdS nanocomposite. The catalytic amount of CdS@CeO₂ heterojunction materials was highly active to produce methanol and CO from CO₂. CdS@CeO₂ heterojunction demonstrated a good formation of methanol (1534 μmol-g^-1) and CO (213 μmol-g^-1) under similar conditions. CdS@CeO₂ heterojunction materials were studied using several characteristic techniques, such as XRD, XPS, HR-TEM, UV-vis, FTIR, PL, and Raman spectroscopy, physisorption and EIS analysis. CdS@CeO₂ nanocomposite demonstrated excellent activity and stability with no leaching of metal content at the end of the sixth run.

Tale of Two Layered Semiconductor Catalysts toward Artificial Photosynthesis

The ever-increasing reliance on nonrenewable fossil fuels due to massive urbanization and industrialization created problems such as depletion of the primary feedstock and raised the atmospheric CO₂ levels causing global warming. A smart and promising approach is artificial photosynthesis that photocatalytically valorizes CO₂ into high-value chemicals. The inexpensive layered semiconductors like g-C₃N₄ and rGO or GO have the potential to make the process practically feasible for real applications. The suitable band positions with respect to the reduction potentials coupled with the typical surface properties of these layered semiconductors play a beneficial role in photoreduction of CO₂. Additionally, the creation of heterojunction interfaces to achieve the Z-scheme by anchoring g-C₃N₄ and rGO with another semiconductor with proper band alignment and dispersing plasmonic nano metals to obtain Schottky barriers on the layered surfaces also help retarding the electron-hole recombination and boost up the catalytic efficacy. Extensive exploration happened in recent years toward artificial photosynthesis over these materials, which needs a critical compendium. Surprisingly, in spite of the recent explosion of studies on photocatalytic reduction of CO₂ over metal-free semiconductors, there is not a single review on comparing the mechanistic aspects of photoreduction of CO₂ over the layered semiconductors g-C₃N₄ and rGO. This review stands out as a unique documentation, where the mechanism of photocatalytic reduction of CO₂ over this set of materials is critically examined in the context of band and surface modifications. An overall conclusion and outlook at the end indicates the need to develop prototypes for artificial photosynthesis with these well-studied semiconducting layered materials to yield solar fuels.