Ultrasonication and hydrothermal assisted synthesis of cloud-like zinc molybdate nanospheres for enhanced detection of flutamide

2D sheet structure of zinc molybdate decorated on MXene for highly selective and sensitive electrochemical detection of the arsenic drug Roxarsone in water samples

Water contamination is a serious environmental issue posing a significant global challenge. Roxarsone (ROX), a widely used anticoccidial drug is excreted in urine and feces, potentially disrupting natural habitats. Therefore, rapid and cost-effective ROX detection is essential. In this study, we developed a 2D sheet structure of zinc molybdate decorated on MXene (ZnMoO4/MXene) for detecting ROX using electrochemical methods. The materials were characterized using appropriate spectrophotometric and voltammetric techniques. The ZnMoO4/MXene hybrid exhibited excellent electrocatalytic performance due to its rapid electron transfer rate and higher electrical conductivity. The ZnMoO4/MXene-modified GCE (ZnMoO4/MXene/GCE) showed a broad linear range with high sensitivity (10.413 μA μМ-1 cm-2) and appreciable limit of detection (LOD) as low as 0.0081 μM. It also demonstrated significant anti-interference capabilities, excellent storage stability, and remarkable reproducibility. Furthermore, the feasibility of utilizing ZnMoO4/MXene/GCE for monitoring ROX in water samples was confirmed, achieving satisfactory recoveries.

A Thiophene Functionalized Hf(IV)-Organic Framework for the Detection of Anti-Neoplastic Drug Flutamide and Biomolecule Hemin and Catalysis of Friedel-Crafts Alkylation

Development, rapid detection and quantification of anticancer drugs in biological samples are crucial for effective drug monitoring. The present work describes the design of a Hf(IV)-based metal-organic framework (MOF) (1) by the reaction between Hf(IV) ion and 2-(thiophene-2-carboxamido)terephthalic acid linker with the surface area of 571 m2 g-1. Desolvated MOF (1') displayed highly discriminative fluorescence sensing properties for the antineoplastic drug flutamide and biomolecule hemin in an aqueous medium in the presence of co-existing biomolecules and ions. The MOF's response time for sensing flutamide and hemin was less than 5 s with low detection limits of 1.5 and 0.08 nM, respectively. Additionally, 1' also demonstrated recyclability up to five cycles and maintained its sensing ability across different pH media, various water samples, and biological fluids. Experimental and theoretical analyses suggested photoinduced electron transfer and inner-filter effect in the presence of flutamide and Förster resonance energy transfer in the presence of hemin are most likely reasons behind the fluorescence quenching of MOF. Furthermore, the MOF demonstrated catalytic activity in Friedel-Crafts alkylation reactions, providing a 96 % yield with slight decay in its activity over four uses. The enhanced activity of 1' compared to Hf-BDC and Hf-BDC-NH2 (BDC: 1,4-benzenedicarboxylic acid) is due to the functionalized thiophene moieties through hydrogen bond donating sites, confirmed by a series of control experiments.

Follow up of the prostate cancer treatment based on a novel sensing method for anti-prostate cancer drug (flutamide)

In this work, novel modified electrode (MXene/MIL-101(Cr)/GCE) are manufactured through simple layer-by-layer immobilization procedure. The fabricated electrochemical sensor was utilized for electrochemical sensing of flutamide in biological fluids. The immobilization of both MXene and metal-organic framework (MOF) materials on the electrode surface could improve the electrochemical performance of the modified glassy carbon electrode (GCE) towards flutamide due to the synergic effects. The established sensor illustrated the significant sensing ability for the determination of flutamide. The influence of solution pH and volume ratio of MXene/MIL-101(Cr) on electrochemical performance of the modified GCE was researched and optimized. The sensor demonstrated a favorable detection limit of 0.009 μM and a linear range of 0.025-100 μM using differential pulse voltammetry (DPV) technique. The suggested assay illustrated an excellent sensing efficiency towards flutamide in body fluids with recoveries ranging from 97.7% to 102.5%, which indicates its potential in real matrices. In addition, the MXene/MIL-101(Cr)/GCE was illustrated some advantages including simple preparation, good selectivity and reproducibility, and rapid flutamide detection.

Recent Advancements in TiO2 Nanostructures: Sustainable Synthesis and Gas Sensing

The search for sustainable technology-driven advancements in material synthesis is a new norm, which ensures a low impact on the environment, production cost, and workers' health. In this context, non-toxic, non-hazardous, and low-cost materials and their synthesis methods are integrated to compete with existing physical and chemical methods. From this perspective, titanium oxide (TiO₂) is one of the fascinating materials because of its non-toxicity, biocompatibility, and potential of growing by sustainable methods. Accordingly, TiO₂ is extensively used in gas-sensing devices. Yet, many TiO₂ nanostructures are still synthesized with a lack of mindfulness of environmental impact and sustainable methods, which results in a serious burden on practical commercialization. This review provides a general outline of the advantages and disadvantages of conventional and sustainable methods of TiO₂ preparation. Additionally, a detailed discussion on sustainable growth methods for green synthesis is included. Furthermore, gas-sensing applications and approaches to improve the key functionality of sensors, including response time, recovery time, repeatability, and stability, are discussed in detail in the latter parts of the review. At the end, a concluding discussion is included to provide guidelines for the selection of sustainable synthesis methods and techniques to improve the gas-sensing properties of TiO₂.

Self assembled three dimensional β-Cu2V2O7 hierarchical flower decorated porous carbon: An efficient electrocatalyst for flutamide detection in biological and environmental samples

The serious situation mandates the use of anticancer drugs, which protect people all over the world from the growth of prostate cancer. In particular, excessive dosage and erroneous discharge of flutamide concentration cause make environmental pollution on the surface of the wastewater. In this study, the highly sensitive and selective electrochemical approach based on copper vanadium oxide decorated porous carbon (denoted as β-Cu₂V₂O₇/PC) composite modified glassy carbon electrode (GCE) has been developed and it was applied for sensitive detection of anticancer drug flutamide (FTM). Moreover, using the co-precipitation method, the flower-like β-Cu₂V₂O₇ hierarchical microstructure was synthesized, and through the wet chemical process, the β-Cu₂V₂O₇/PC composite was obtained. The resultant product was characterized by XRD, FTIR, RAMAN, XPS and structural morphology established by FESEM analysis. Besides that, the electrochemical characterization and properties were analyzed by cyclic voltammetry (CV) and amperometric (i-t) techniques. The β-Cu₂V₂O₇/PC/RDGCE had two linear ranges at 0.01-2.11 μM and 2.31-30.81 μM. The lower limits of detection and sensitivity were found at 0.62 nM (S/N = 3), and 24.33 μA μM^-1 cm^-2 respectively. The practicability test was applied for the determination of FTM in urine, blood serum and environmental aquatic fluid with satisfactory recovery obtained.

Ultrasound-assisted preparation of calcium malate and its absorption

In this experiment, response surface methodology was used to study the preparation of malic acid calcium salt from bovine bones assisted by ultrasonication. The results showed that the optimum conditions for ultrasound-assisted preparation of calcium malate from bovine bone were as follows: solid-liquid ratio 1:15, solid-acid ratio 1:1.5, ultrasonic power 200 W, ultrasonic temperature 35°C, and ultrasonication time 17 min. The efficiency of calcium recovery was 66.16%, and the purity was 92.54%. After three ultrasonic treatments of 17 min each, the calcium malate conversion rate of bovine bone reached 95.73%. Animal experiments showed that feeding bovine bone-derived calcium malate significantly increased alkaline phosphatase (ALP) activity and bone calcium content, reduced tartrate-resistant acid phosphatase (TRAP) activity, and maintained the balance of serum calcium and phosphorus. These results indicated that the ultrasonic method effectively ionized calcium in bovine bone, which provides a reference point for the industrial production of calcium products with bovine bone as the raw material.

Nanomolar level detection of non-steroidal antiandrogen drug flutamide based on ZnMn2O4 nanoparticles decorated porous reduced graphene oxide nanocomposite electrode

Flutamide is a non-steroidal antiandrogen drug and widely used in the treatment of prostatic carcinoma. Nevertheless, the excessive intake and improper disposal could affect the living organisms. In this work, we have synthesized a new nanocomposite based on ZnMn₂O₄ nanoparticles and porous reduced graphene oxide nanosheets (ZnMn₂O₄-PGO) for the electrocatalytic detection of flutamide (FLU) drug. The crystallinity and morphological properties of ZnMn₂O₄-PGO composite examined by different characterization techniques such as X-ray diffraction, Raman spectroscopy and so on. The fabricated ZnMn₂O₄-PGO nanocomposite modified electrode exhibited superior electrocatalytic performance to FLU drug in an optimized pH electrolyte. Fascinatingly, the electrode received a wide linear range (0.05-3.5 µM) with limit of detection of 8 nM. Besides, the developed ZnMn₂O₄-PGO nanocomposite electrode showed good sensitivity 1.05 µAµM^-1 cm^-2 and excellent selectivity for FLU detection in presence of various interfering species. A developed disposable electrode was scrutinized to determine FLU level in human urine samples by spiking method and the results achieved good recoveries in real sample analysis.

Bismuth molybdate incorporated functionalized carbon nanofiber as an electrocatalytic tool for the pinpoint detection of organic pollutant in life samples

Herein, we fabricated a feasible and accurate sensing platform for the quantification of toxic organic pollutant 2-nitroaniline (2-NA) in water samples through electrocatalyst made up of bismuth molybdate (Bi₂MoO₆, BMO) functionalized carbon nanofiber (f-CNF) modified electrode. The preparation of BMO/f-CNF composite is of two methods, such as co-precipitation (C-BMO/f-CNF) and ultrasonication method (U-BMO/f-CNF). The physicochemical properties of the composites were characterized by XRD, FTIR, Raman, BET, FE-SEM, and HR-TEM techniques. At U-BMO/f-CNF, the charge transfer resistance was low (R_ct = 12.47 Ω) compared to C-BMO/f-CNF because nanosized U-BMO particles correctly aim at the defective sites of the f-CNF surface wall. Further, the electrocatalytic activity of C&U-BMO/f-CNF composites was examined by cyclic voltammetry (CV) and differential pulse voltammetry techniques (DPV) for the electrochemical detection of 2-nitroaniline (2-NA). The U-BMO/f-CNF/GCE shows a higher cathodic current, wide dynamic linear range of 0.01-168.01 µM, and superior electrocatalytic activity with a low detection limit (0.0437 µM) and good sensitivity (0.6857 μA μM^-1 cm^-2). The excellent selectivity nature of U-BMO/f-CNF/GCE was observed in the presence of various organic pollutants and a few toxic metal cations. The practical applicability such as stability, repeatability towards 2-NA outcomes with accepted results. Besides, the practical viability of as proposed U-BMO/f-CNF sensor was investigated in soil and lake water samples delivers good recovery results. Hence from these analyses, we conclude that U-BMO/f-CNF/GCE potential for the determination of hazardous environmental pollutant 2-NA.

A molecularly imprinted poly 2-aminophenol-gold nanoparticle-reduced graphene oxide composite for electrochemical determination of flutamide in environmental and biological samples

A selective and sensitive electrochemical sensor based on reduced graphene oxide, gold nanoparticles, and molecularly imprinted poly 2-aminophenol was developed for electrochemical determination of flutamide in environmental and biological samples. The composite fabrication was electrochemically carried out and the composite was characterized by Fourier transform infrared, proton and carbon nuclear magnetic resonance, field emission scanning electron microscopy, and energy-dispersive X-ray spectrometry. The spectroscopic results showed that polymerization of molecularly imprinted poly 2-aminophenol took place through a ladder structure system. After optimization of effective parameters on the response of the sensor, the obtained linear range, relative standard deviation (for a concentration of 50 μg L^-1 with five replicates) and limit of quantification for flutamide determination were determined to be 2-375 μg L^-1, 1.54% and 0.8 μg L^-1, respectively. The results showed that the application of poly 2-aminophenol in the structure of the proposed sensor using a molecular imprinting approach made the sensor highly selective toward flutamide, distinguishing it from similar nitro-containing compounds. The prepared sensor was successfully utilized to analyze environmental water and urine samples. The obtained results showed that the proposed method is in agreement with the HPLC method and can be used as a reliable alternative method for the analysis of flutamide.

Heterostructured bismuth oxide/hexagonal-boron nitride nanocomposite: A disposable electrochemical sensor for detection of flutamide

Aquatic contamination from the accumulation of pharmaceuticals has induced severe toxicological impact to the ecological environment, especially from non-steroidal anti-inflammatory drugs (NSAIDs). Real-time monitoring of flutamide, which is a class of NSAIDs, is very significant in environmental protection. In this work, we have synthesized the hexagonal-h boron nitride decorated on bismuth oxide (Bi₂O₃/h-BN) based nanocomposite for the effective electrochemical detection of flutamide (FTM). The structural and morphological information of the heterostructured Bi₂O₃/h-BN nanocomposite was analyzed by using a sequence of characterization methods. Voltammetric techniques were used to evaluate the analytical performance of the Bi₂O₃/h-BN modified screen-printed carbon electrode (SPCE) for the FTM detection. The Bi₂O₃/h-BN modified SPCE displays a synergetic catalytic effect for the reduction of FTM due to large surface area, numerous active sites, fast charge transfer and abundant defects. The proposed electrochemical sensing platform demonstrates high selectivity, low detection limit (9.0 nM), good linear ranges (0.04-87 μM) and short response time for the detection of FTM. The feasibility of the electrochemical sensor has been proved by the successful application to determine FTM in environmental samples.