Pickering emulsion prepared by nano-silica particles - A comparative study for exploring the effect of various mechanical methods

Deep-Eutectic-Solvent-in-Water Pickering Emulsions Stabilized by Starch Nanoparticles

Deep eutectic solvents (DESs) have received extensive attention in green chemistry because of their ease of preparation, cost-effectiveness, and low toxicity. Pickering emulsions offer advantages such as long-term stability, low toxicity, and environmental friendliness. The oil phase in some Pickering emulsions is composed of solvents, and DESs can serve as a more effective alternative to these solvents. The combination of DESs and Pickering emulsions can improve the applications of green chemistry by reducing the use of harmful chemicals and enhancing sustainability. In this study, a Pickering emulsion consisting of a DES (menthol:octanoic acid = 1:1) in water was prepared and stabilized using starch nanoparticles (SNPs). The emulsion was thoroughly characterized using various techniques, including optical microscopy, transmission microscopy, laser particle size analysis, and rheological measurements. The results demonstrated that the DES-in-water Pickering emulsion stabilized by the SNPs had excellent stability and retained its structural integrity for more than 200 days at room temperature (20 °C). This prolonged stability has significant implications for many applications, particularly in the field of storage and transportation. This Pickering emulsion based on DESs and SNPs is sustainable and stable, and it has great potential to improve green chemistry practices in various fields.

Ultrasound-assisted intensification of Pickering interfacial biocatalysis preparation of vitamin A aliphatic esters

A novel approach to ultrasound-assisted Pickering interfacial biocatalysis (PIB) has been proposed and implemented for the efficient enzymatic transesterification production of vitamin A fatty acid esters. This is the first instance of exploiting the synergistic effect of ultrasound and the bifunctional modification of enzyme supports to accelerate biocatalytic performance in PIB systems. The optimal conditions were determined to be ultrasound power of 70 W, on/off time of 5 s/5 s, substrate molar ratio of 1:1, enzyme addition of 2 %, and a volume ratio of n-hexane to PBS of 3:1, a temperature of 40 °C, and a time of 30 min. The application of ultrasound technology not only improved lipase activity but also allowed for a reduction in emulsion droplet size to enhance interfacial mass transfer.Bifunctional modification of silica-based supports enhanced stability of immobilized enzymes by increasing hydrogen bonding while maintaining the active interface microenvironment. Compared with a non-ultrasound-assisted PIB system stabilized by mono-modified immobilized enzyme particles, the catalytic efficacy (CE) of the novel system reached 8.18 mmol g-1 min-1, which was enhanced by 3.33-fold, while the interfacial area was found to have increased by 17.5-fold. The results facilitated the conversion of vitamin A palmitate (VAP), vitamin A oleate (VAO), vitamin A linoleate (VAL), and vitamin A linolenate (VALn), with conversion rates of approximately 98.2 %, 97.4 %, 96.1 %, and 94.7 %, respectively. This represents the most efficient example that has been reported to our knowledge. Furthermore, the system demonstrated improved reusability, with a conversion rate of 62.1 % maintained even after 10 cycles. The findings presented in this paper provide valuable insights into an efficient and conveniently promising protocol for the development of PIB systems.

Modified Amber Particles as a Stabilizer to Construct Oil-in-Water Pickering Emulsions for Improved Thermal Stability of Acorus tatarinowii Essential Oil

Lingzhu Pulvis is a classic formulation for treating febrile convulsions in children. However, Acorus tatarinowii essential oil (AT-EO) in this prescription is prone to volatilization and oxidation, compromising the efficacy and quality control of this formulation. Herein, based on the concept of "combination of medicine and adjuvant", Pickering emulsion technology was applied to enhance the stability of AT-EO using modified amber as a stabilizer. Amber was a resinous medicinal powder in Lingzhu Pulvis and was modified into a suitable stabilizer for Pickering emulsion through surface modification. A thermal stability study indicated that Pickering emulsion, stabilized by modified amber, exhibited a higher retention rate of AT-EO and lower levels of peroxide value and malondialdehyde content compared to those of the pure AT-EO group after heat treatment at 40 °C for 1, 3, and 8 h. Additionally, component analysis in content and composition revealed that the volatile components of AT-EO in the Pickering emulsion were more stable during the thermal treatment process. This study convincingly illustrates the potential of a Pickering emulsion stabilized with modified medicinal powders to improve the thermal stability of the essential oil.

Ultrasound Pretreatment for Enhancing Fine and Ultrafine Flake Graphite Flotation Beneficiation

With the severe depletion of coarse flake graphite (a critical raw material) resources, developing and utilizing fine and ultrafine graphite resources have recently attracted attention. Froth flotation is a widely used technique for the initial enrichment of graphite; however, the flotation selectivity decreases significantly along with particle size reduction. Ultrasound pretreatment would be a promising method to improve the flotation of fine particles. As an innovative approach to understand better the flotation response of different flake graphite sizes, this study conducted a comparative analysis based on flotation concentrate yield and ash as well as ash removal rate between the flake graphite with various particle sizes after ultrasound pretreatment. Particle size, X-ray powder diffraction, and scanning electron microscopy and energy dispersive X-ray spectroscopy analyses were used to investigate the effect of ultrasound treatment on mineralogical properties of the flake graphite with varied particle sizes. Process outcomes indicated that the flotation performance of fine flake graphite (mean chord length: 62.63 μm) was significantly enhanced after ultrasound pretreatment. However, flotation of the ultrafine flake graphite (mean chord length: 24.97 μm) after ultrasound treatment was limited due to the difficulty of generating sufficient fragmentation and dissociation by microjets and shock waves formed by the cavitation effect. Compared with conventional flotation, the concentrate yield of ultrasound flotation increased from 88.95 to 94.98%, ash content decreased from 5.72 to 4.87%, and ash removal rate enhanced from 36.94 to 42.61%. Particle size and mineral property analyses confirmed that further crushing and dissociation of the larger flake graphite after ultrasound pretreatment would be the main factors contributing to improved flotation performance. Additionally, the formation of air flocs in the coarse flake graphite during the ultrasound pretreatment process facilitated the flotation recovery of the crushed graphite particles.

Ultralight, Robust, Thermal Insulating Silica Nanolace Aerogels Derived from Pickering Emulsion Templates

Synthesis of silica aerogel insulators with ultralight weight and strong mechanical properties using a simplified technique remains challenging for functional soft materials. This study introduces a promising method for the fabrication of mechanically reinforced ultralight silica aerogels by employing attractive silica nanolace (ASNLs)-armored Pickering emulsion templates. For this, silica nanolaces (SiNLs) are fabricated by surrounding a cellulose nanofiber with necklace-shaped silica nanospheres. In order to achieve amphiphilicity, which is crucial for the stabilization of oil-in-water Pickering emulsions, hydrophobic alkyl chains and hydrophilic amine groups are grafted onto the surface of SiNLs by silica coupling reactions. Freeze-drying of ASNLs-armored Pickering emulsions has established a new type of aerogel system. The ASNLs-supported mesoporous aerogel shows 3-fold greater compressive strength, 4-fold reduced heat transfer, and a swift heat dissipation profile compared to that of the bare ASNL aerogel. Additionally, the ASNL aerogel achieves an ultralow density of 8 mg cm-3, attributed to the pore architecture generated from closely jammed emulsion drops. These results show the potential of the ASNL aerogel system, which is ultralight, mechanically stable, and thermally insulating and could be used in building services, energy-saving technologies, and the aerospace industry.

Enhancing both oral bioavailability and anti-ischemic stroke efficacy of ginkgolide B by preparing nanocrystals self-stabilized Pickering nano-emulsion

Ginkgolide B (GB), which has been demonstrated as the most efficacious naturally occurring platelet-activating factor (PAF) antagonist, is extensively utilized for the management of cardiovascular and cerebrovascular ailments. Nevertheless, its limited oral bioavailability is hindered by its low solubility in gastric acid and inadequate stability in intestinal fluid, thereby constraining its practical application. This study aimed to develop GB nanocrystals (GB-NCs) and GB nanocrystals self-stabilized Pickering nano-emulsion (GB-NSSPNE) using a miniaturized wet bead milling method. Comparative evaluations were conducted in vivo and in vitro to assess their effectiveness. The findings revealed that GB-NSSPNE, with its intact nanoparticle slow release and absorption, was more effective in enhancing the oral bioavailability of GB compared to the rapid release and absorption of GB-NCs. This finding suggests a potential novel strategy for the oral delivery of GB.

Synergistic stabilization of emulsion gel by nanoparticles and surfactant enables 3D printing of lipid-rich solid oral dosage forms

Pharmaceutical formulation of oral dosage forms is continuously challenged by the low solubility of new drug candidates. Pickering emulsions, emulsions stabilized with solid particles, are a promising alternative to surfactants for developing long-term stable emulsions that can be tailored for controlled release of lipophilic drugs. In this work, a non-emulsifying lipid-based formulation (LBF) loaded with fenofibrate was formulated into an oil-in-water (O/W) emulsion synergistically stabilized by stearic acid and silica (SiO2) nanoparticles. The emulsion had a droplet size of 341 nm with SiO2 particles partially covering the oil-water interface. In vitro lipid digestion was faster for the emulsion compared to the corresponding LBF due to the larger total surface area available for digestion. Cellulose biopolymers were added to the emulsion to produce a gel for semi-solid extrusion (SSE) 3D printing into tablets. The emulsion gel showed suitable rheological attributes for SSE, with a trend of higher viscosity, yield stress, and storage modulus (G'), compared to a conventional self-emulsifying lipid-based emulsion gel. The developed emulsion gel allows for a non-emulsifying LBF to be transformed into solid dosage forms for rapid lipid digestion and drug release of a poorly water-soluble drug in the small intestine.

CO2 responsive self-standing Pickering emulsion gel stabilized with rosin-based surfactant modified cellulose nanofibrils

Emulsion gel was developed to provide desirable texture, palatability and functionality to food products. Tunable stability of emulsions is often desired, as in certain situations, the chemical content release usually relies on emulsion induced destabilization of the droplet. However, the destabilization for emulsion gel is difficult because of the formation of highly entangled networks. To address this issue, a fully biobased Pickering emulsion gel stabilized by cellulose nanofibrils (CNF) modified with a CO2 responsive rosin-based surfactant, maleopimaric acid glycidyl methacrylate ester 3-dimethylaminopropylamine imide (MPAGN) was reported. The emulsification/de-emulsification can be reversibly regulated because this surfactant has sensitive CO2 responsive property. MPAGN can be reversibly between active cationic (MPAGNH+) and inactive nonionic (MPAGN) responsive to CO2 and N2. The microstructure of the emulsion gel was observed and compared before and after the response. The rheological properties of emulsion gel stabilized by different concentrations of MPAGNH+ and different contents of CNF were studied separately. As 0.2 wt% CNF was dispersed in 1 mM MPAGNH+ solution, the obtained emulsion can be self-standing for long duration. The rheology study indicated that these emulsions show typical gel characteristics with shear-thinning behavior. The stabilization mechanism of these gel emulsion is a synergistic effect caused by the combination of CO2 responsive Pickering emulsion and intertwined network caused by the hydrogen-bond interaction among CNF.

Pickering Emulsion Stabilized by β-Cyclodextrin and Cinnamaldehyde/β-Cyclodextrin Composite

A Pickering emulsion was prepared using β-cyclodextrin (β-CD) and a cinnamaldehyde (CA)/β-CD composite as emulsifiers and corn oil, camellia oil, lard oil, and fish oil as oil phases. It was confirmed that Pickering emulsions prepared with β-CD and CA/β-CD had good storage stability. The rheological experiments showed that all emulsions had G' values higher than G″, thus confirming their gel properties. The results of temperature scanning rheology experiments revealed that the Pickering emulsion prepared with β-CD and CA/β-CD composites had high stability, in the range of 20-65 °C. The chewing properties of Pickering emulsions prepared by β-CD and corn oil, camellia oil, lard, and herring oil were 8.02 ± 0.24 N, 7.94 ± 0.16 N, 36.41 ± 1.25 N, and 5.17 ± 0.13 N, respectively. The chewing properties of Pickering emulsions made with the CA/β-CD composite and corn oil, camellia oil, lard, and herring oil were 2.51 ± 0.05 N, 2.56 ± 0.05 N, 22.67 ± 1.70 N, 3.83 ± 0.29 N, respectively. The texture properties confirmed that the CA/β-CD-composite-stabilized-emulsion had superior palatability. After 28 days at 50 °C, malondialdehyde (MDA) was detected in the emulsion. Compared with the β-CD and CA + β-CD emulsion, the CA/β-CD composite emulsion had the lowest content of MDA (182.23 ± 8.93 nmol/kg). The in vitro digestion results showed that the free fatty acid (FFA) release rates of the CA/β-CD composite emulsion (87.49 ± 3.40%) were higher than those of the β-CD emulsion (74.32 ± 2.11%). This strategy provides ideas for expanding the application range of emulsifier particles and developing food-grade Pickering emulsions with antioxidant capacity.

A Review of Pickering Emulsions: Perspectives and Applications

Pickering emulsions are systems composed of two immiscible fluids stabilized by organic or inorganic solid particles. These solid particles of certain dimensions (micro- or nano-particles), and desired wettability, have been shown to be an alternative to conventional emulsifiers. The use of biodegradable and biocompatible stabilizers of natural origin, such as clay minerals, presents a promising future for the development of Pickering emulsions and, with this, they deliver some advantages, especially in the area of biomedicine. In this review, the effects and characteristics of microparticles in the preparation and properties of Pickering emulsions are presented. The objective of this review is to provide a theoretical basis for a broader type of emulsion, in addition to reviewing the main aspects related to the mechanisms and applications to promote its stability. Through this review, we highlight the use of this type of emulsion and its excellent properties as permeability promoters of solid particles, providing ideal results for local drug delivery and use in Pickering emulsions.

The Challenges and Prospects of Recovering Fine Copper Sulfides from Tailings Using Different Flotation Techniques: A Review

Flotation is a common mineral processing method used to upgrade copper sulfide ores; in this method, copper sulfide mineral particles are concentrated in froth, and associated gangue minerals are separated as tailings. However, a significant amount of copper is lost into tailings during the processing; therefore, tailings can be considered secondary resources or future deposits of copper. Particle–bubble collision efficiency and particle–bubble aggregate stability determines the recovery of target particles; this attachment efficiency plays a vital role in the selectivity process. The presence of fine particles in the flotation circuit is because of excessive grinding, which is to achieve a higher degree of liberation. Complex sulfide ores of markedly low grade further necessitate excessive grinding to achieve the maximum degree of liberation. In the flotation process, fine particles due to their small mass and momentum are unable to collide with rising bubbles, and their rate of flotation is very slow, further lowering the recovery of target minerals. This collision efficiency mainly depends on the particle–bubble size ratio and the concentration of particles present in the pulp. To overcome this problem and to maintain a favorable particle–bubble size ratio, different techniques have been employed by researchers to enhance particle–bubble collision efficiency either by increasing particle size or by decreasing bubble size. In this article, the mechanism of tailing loss is discussed in detail. In addition, flotation methods for fine particles recovery such as microbubble flotation, column flotation, nanobubble flotation, polymer flocculation, shear flocculation, oil agglomeration, and carrier flotation are reviewed, and their applications and limitations are discussed in detail.