Ultrasound-assisted synthesis of graphene@MXene hybrid: A novel and promising material for electrochemical sensing

Ti3C2Tx/laser-induced graphene-based micro-droplet electrochemical sensing platform for rapid and sensitive detection of benomyl

The design and fabrication of high-performance electrode devices are highly important for the practical application of electrochemical sensors. In this study, flexible three-dimensional porous graphene electrode devices were first facilely fabricated using common laser ablation technique at room temperature. After then, hydrophilic two-dimensional MXene (Ti3C2Tx) nanosheet was decorated on the surface of the laser-induced graphene (LIG), resulting in disposable Ti3C2Tx/LIG electrode devices. After introducing Ti3C2Tx nanosheet, the electrochemical active area, electron transfer ability of LIG electrode device and its adsorption efficiency toward organic pesticide benomyl was significantly boosted. As a result, the fabricated Ti3C2Tx/LIG electrode device exhibited significantly enhanced electrocatalytic activity toward benomyl oxidation. Based on this, a novel and ultra-sensitive electrochemical platform for micro-droplet detection of benomyl was achieved in the range of 10 nM-6000 nM with detection sensitivity of 169.9 μA μM-1 cm-2 and detection limit of 5.8 nM. Considering the low-cost Ti3C2Tx/LIG electrode devices are rarely used for electrochemical analysis, we believed this research work will contribute to exploring the broader application of MXene/LIG electrode devices in the field of electrochemical sensing.

Highly Sensitive Detection of Hydrogen Peroxide in Cancer Tissue Based on 3D Reduced Graphene Oxide-MXene-Multi-Walled Carbon Nanotubes Electrode

Hydrogen peroxide (H2O2) is a signaling molecule that has the capacity to control a variety of biological processes in organisms. Cancer cells release more H2O2 during abnormal tumor growth. There has been a considerable amount of interest in utilizing H2O2 as a biomarker for the diagnosis of cancer tissue. In this study, an electrochemical sensor for H2O2 was constructed based on 3D reduced graphene oxide (rGO), MXene (Ti3C2), and multi-walled carbon nanotubes (MWCNTs) composite. Three-dimensional (3D) rGO-Ti3C2-MWCNTs sensor showed good linearity for H2O2 in the ranges of 1-60 μM and 60 μM-9.77 mM at a working potential of -0.25 V, with sensitivities of 235.2 µA mM-1 cm-2 and 103.8 µA mM-1 cm-2, respectively, and a detection limit of 0.3 µM (S/N = 3). The sensor exhibited long-term stability, good repeatability, and outstanding immunity to interference. In addition, the modified electrode was employed to detect real-time H2O2 release from cancer cells and cancer tissue ex vivo.

Ultrasound technology assisted colloidal nanocrystal synthesis and biomedical applications

Non-invasive and high spatiotemporal resolution mythologies for the diagnosis and treatment of disease in clinical medicine promote the development of modern medicine. Ultrasound (US) technology provides a non-invasive, real-time, and cost-effective clinical imaging modality, which plays a significant role in chemical synthesis and clinical translation, especially in in vivo imaging and cancer therapy. On the one hand, the US treatment is usually accompanied by cavitation, leading to high temperature and pressure, so-called "hot spot", playing a significant role in sonochemical-based colloidal synthesis. Compared with the classical nucleation synthetic method, the sonochemical synthesis strategy presents high efficiency for the fabrication of colloidal nanocrystals due to its fast nucleation and growth procedure. On the other hand, the US is attractive for in vivo and medical treatment, with applications increasing with the development of novel contrast agents, such as the micro and nano bubbles, which are widely used in neuromodulation, with which the US can breach the blood-brain barrier temporarily and safely, opening a new door to neuromodulation and therapy. In terms of cancer treatment, sonodynamic therapy and US-assisted synergetic therapy show great effects against cancer and sonodynamic immunotherapy present unparalleled potentiality compared with other synergetic therapies. Further development of ultrasound technology can revolutionize both chemical synthesis and clinical translation by improving efficiency, precision, and accessibility while reducing environmental impact and enhancing patient care. In this paper, we review the US-assisted sonochemical synthesis and biological applications, to promote the next generation US technology-assisted applications.

Ultrasound assisted fabrication of InVO4/In2S3 heterostructure for enhanced sonophotocatalytic degradation of pesticides

A cost effective and environmentally benign ultrasonic method has been developed for the synthesis of InVO4 (InV), In2S3 (InS) and the InVO4/In2S3 heterostructure (InV/InS). All the designed materials were evaluated for their structural, morphological, spectroscopic, and electrochemical characterizations. Materials were examined for photocatalytic, sonocatalytic, and sonophotocatalytic degradation of carbofuran (CBF) and diazinon (DZN) pesticides under visible light. InV/InS showed enhanced degradation of CBF and DZN when compared to InV and InS. Photocatalytic degradation was accelerated by ultrasonication and found to degrade 97 and 98 % of CBF and DZN in 60 and 70 min, respectively. The reaction conditions, like pH, catalyst dosage, acoustic intensity, and ultrasound power, were carefully optimized. Electron spin resonance (ESR) spectroscopy shows the generation of superoxide radical anion and hydroxyl radicals as reactive species during photoredox reaction. The CBF and DZN degradation intermediates were analyzed using liquid chromatography mass spectroscopy (LC-MS) that shows the mineralization of the CBF and DZN to CO2 and H2O. The effect of Cl-, and PO43- were examined towards degradation of CBF and DZN under optimal conditions in the presence of InV/InS. The degradation of CBF and DZN is decreased in presence of Cl-, CO32- and NO3- but PO43- ions does not show any effect on degradation. The bandgap and Mott-Schottky results suggest the existence of type-II heterostructure between InV and InS through the interface. The synthesis of heterostructure and degradation of pesticides utilizes ultrasonic waves, which prove their multiple applications and attract researchers towards the effective use of sonication.

Graphene/metal-organic framework nano-sandwiches derived N, P-codoped porous carbon nanosheets as robust material for electrochemical analysis

Construction of novel two-dimensional porous carbon nanosheets with superior electrochemical activity is of great challenge. Here, graphene/ZIF-8 nano-sandwiches derived N, P-codoped porous carbon nanosheets (N, P-codoped PCN) was easily obtained by sequential room temperature self-assembly and high-temperature carbonization method. Relative to the widely used physically exfoliated graphene nanosheets (GN) and graphene/ZIF-8 derived N-doped porous carbon nanosheets (N-doped PCN), N, P-codoped PCN displayed larger active surface, faster electron transport ability and stronger physical adsorption ability, which can be ascribed to the dual doping effect of heteroatoms N and P. As a result, N, P-codoped PCN exhibited remarkable oxidation signal enhancement for tumor marker (8-hydroxy-2'-deoxyguanosine), analgesic and antipyretic drug (acetaminophen) and organic pesticide (benomyl). Besides, the limits of detection were measured as low as 1.58 nM, 7.50 nM and 2.10 nM with sensitivity of 270.00 μA μM-1 cm-2, 757.14 μA μM-1 cm-2 and 272.86 μA μM-1 cm-2 for 8-hydroxy-2'-deoxyguanosine, acetaminophen and benomyl, respectively. Basing on this, a novel and highly sensitive electrochemical sensing platform was developed. It is believed that the reported two-dimensional N, P-codoped PCN with unique structure and composition is highly valuable for the development of carbon-based electrochemical sensors.

Electrospun Piezoelectric Scaffold with External Mechanical Stimulation for Promoting Regeneration of Peripheral Nerve Injury

Safe and efficient provision of electrical stimulation (ES) for nerve repair and regeneration is a problem that needs to be addressed. In this study, a silk fibroin/poly(vinylidene fluoride-co-hexafluoropropylene)/Ti₃C₂T_x (SF/PVDF-HFP/MXene) composite scaffold with piezoelectricity was developed by electrospinning technology. MXene was loaded to the scaffold to enhance the piezoelectric properties (Output voltage reaches up to 100 mV), mechanical properties, and antibacterial activity. Cell experiments demonstrated piezoelectric stimulation under external ultrasonication for promoting the growth and proliferation of Schwann cells (SCs) cultured on this electrospun scaffold. Further in vivo study with rat sciatic nerve injury model revealed that the SF/PVDF-HFP/MXene nerve conduit could induce the proliferation of SCs, enhance the elongation of axon, and promote axonal myelination. Under the piezoelectric effect of this nerve scaffold, the rats with regenerative nerve exhibited a favorable recovery effect of motor and sensory function, indicating a safe and feasible method of using this SF/PVDF-HFP/MXene piezoelectric scaffold for ES provision in vivo.

Effect of ultrasound power on HCl leaching kinetics of impurity removal of aphanitic graphite

This study aimed to investigate the effect of ultrasonic power and temperature on the impurity removal rate during conventional and ultrasonic-assisted leaching of aphanitic graphite. The results showed that the ash removal rate increased gradually (∼50 %) with the increase in ultrasonic power and temperature but deteriorated at high power and temperature. The unreacted shrinkage core model was found to fit the experimental results better than other models. The Arrhenius equation was used to calculate the finger front factor and activation energy under different ultrasonic power conditions. The ultrasonic leaching process was significantly influenced by temperature, and the enhancement of the leaching reaction rate constant by ultrasound was mainly reflected in the increase of the pre-exponential factor A. Ultrasound treatment improved the efficiency of impurity mineral removal by destroying the inert layer formed on the graphite surface, promoting particle fragmentation, and generating oxidation radicals. The poor reactivity of hydrochloric acid with quartz and some silicate minerals is a bottleneck limiting the further improvement of impurity removal efficiency in ultrasound-assisted aphanitic graphite. Finally, the study suggests that introducing fluoride salts may be a promising method for deep impurity removal in the ultrasound-assisted hydrochloric acid leaching process of aphanitic graphite.

Development of Two-Dimensional Functional Nanomaterials for Biosensor Applications: Opportunities, Challenges, and Future Prospects

New possibilities for the development of biosensors that are ready to be implemented in the field have emerged thanks to the recent progress of functional nanomaterials and the careful engineering of nanostructures. Two-dimensional (2D) nanomaterials have exceptional physical, chemical, highly anisotropic, chemically active, and mechanical capabilities due to their ultra-thin structures. The diversity of the high surface area, layered topologies, and porosity found in 2D nanomaterials makes them amenable to being engineered with surface characteristics that make it possible for targeted identification. By integrating the distinctive features of several varieties of nanostructures and employing them as scaffolds for bimolecular assemblies, biosensing platforms with improved reliability, selectivity, and sensitivity for the identification of a plethora of analytes can be developed. In this review, we compile a number of approaches to using 2D nanomaterials for biomolecule detection. Subsequently, we summarize the advantages and disadvantages of using 2D nanomaterials in biosensing. Finally, both the opportunities and the challenges that exist within this potentially fruitful subject are discussed. This review will assist readers in understanding the synthesis of 2D nanomaterials, their alteration by enzymes and composite materials, and the implementation of 2D material-based biosensors for efficient bioanalysis and disease diagnosis.

Application Prospects of MXenes Materials Modifications for Sensors

The first two-dimensional (2D) substance sparked a boom in research since this type of material showed potential promise for applications in field sensors. A class of 2D transition metal nitrides, carbides, and carbonitrides are referred to as MXenes. Following the 2011 synthesis of Ti₃C₂ from Ti₃AlC₂, much research has been published. Since these materials have several advantages over conventional 2D materials, they have been extensively researched, synthesized, and studied by many research organizations. To give readers a general understanding of these well-liked materials, this review examines the structures of MXenes, discusses various synthesis procedures, and analyzes physicochemistry properties, particularly optical, electronic, structural, and mechanical properties. The focus of this review is the analysis of modern advancements in the development of MXene-based sensors, including electrochemical sensors, gas sensors, biosensors, optical sensors, and wearable sensors. Finally, the opportunities and challenges for further study on the creation of MXenes-based sensors are discussed.