Microwave assisted acid hydrolysis for bioethanol fuel production from sago pith waste

Liquid fertilizers produced by microwave-assisted acid hydrolysis of livestock and poultry wastes and their effects on hot pepper cultivation

Liquid fertilizers (LFs) produced by microwave-assisted acid hydrolysis of livestock and poultry wastes were applied to potted hot pepper (Capsicum annuum L.) to evaluate their potential to be used as amino acid LFs. A preliminary experiment was conducted to determine the optimum acid-hydrolysis conditions for producing LFs from a mixture of pig hair and faeces (P) and another mixture of chicken feathers and faeces (C). Two LFs were produced under the optimum acid-hydrolysis conditions (acidification by sulphuric acid (7.5 mol L-1) in a microwave (200 W) for 90 minutes), and a commercial amino acid LF (Guo Guang (GG)) was used for comparison. P, C and GG fertilizers were tested in potted hot pepper cultivation at two doses, whereas no fertilizer application served as the control (CK). P and C fertilizers significantly increased the fruit yield compared with GG fertilizer, particularly at the higher dose. Moreover, the treatments improved the fruit vitamin C and soluble sugar contents in the order of C > P > GG compared with CK. These results could be attributed to more types of amino acids in C fertilizer than in P and GG fertilizers. The results also indicated that the prepared fertilizers could significantly increase the shoot and root dry weight, soil available nitrogen and phosphorus contents and nitrogen, phosphorus, and potassium (NPK) uptake by plants compared with CK. In conclusion, microwave-assisted acid hydrolysis could effectively convert unusable wastes into valuable fertilizers comparable or even superior to commercial fertilizers.

`A critical review on current status and environmental sustainability of pre-treatment methods for bioethanol production from lignocellulose feedstocks

Lignocellulosic biomass resource has been widely used as a natural resource for the synthesis of biofuels and bio-based products through pre-treatment, saccharification and fermentation processes. In this review, we delve into the environmental implications of bioethanol production from the widely utilized lignocellulosic biomass resource. The focus of our study is the critical stage of pre-treatment in the synthesis process, which also includes saccharification and fermentation. By collecting scientific data from the available literature, we conducted a comprehensive life cycle analysis. Our findings revealed substantial differences in the environmental burdens associated with diverse pre-treatment methods used for lignocellulosic biomass. These results highlight the importance of selecting environmentally benign pre-treatment techniques to promote the sustainability of bioethanol production. Future research directions are suggested, emphasizing the optimization of pre-treatment processes to further mitigate their environmental impact.

Microwave-assisted alkali pre-treatment medium for fractionation of rice straw and catalytic conversion to value-added 5-hydroxymethyl furfural and lignin production

In the current study, the use of microwave-assisted sodium hydroxide medium (MWSH) for pre-treatment and saccharification of rice straw to obtain sugar syrup for the production of 5-hydroxymethyl furfural (5-HMF) was investigated. The optimization of the MWSH pre-treatment was carried out using central composite methodology, resulting in a maximum reducing sugar yield of 350 mg/g of treated rice straw (TRS) and a glucose yield of 255 mg/g of TRS under the conditions of a microwave power of 681 W, a NaOH concentration of 0.54 M, and a pre-treatment time of 3 min. Additionally, the microwave assisted transformation of sugar syrup with titanium magnetic silica nanoparticle as catalyst, producing 41.1 % yield of 5-HMF from the sugar syrup after 30 min microwave irradiation at 120 °C with catalyst loading of 2.0:200 (w/v)). The structural characterization of the lignin was analysed using ¹H NMR techniques, and the surface carbon (C1s spectra) and oxygen (O1s spectra) composition changes of the rice straw during pre-treatment were analysed using X-ray photoelectron spectroscopy. The rice straw based bio-refinery process which contains MWSH pretreatment followed by dehydration of sugars achieved high efficiency of 5-HMF production.

Modification of bioethanol production in an innovative pneumatic digester with non-thermal cold plasma detoxification

An anaerobic pneu-mechanical digester (PD) was designed to ferment lignocellulosic compounds. So, wheat and rice straws were pretreated using an ultrasound-acid, and then thermal-acid hydrolysis was conducted. Hydrolysis optimization was performed using the response surface method and the optimal points for time, temperature, and acid concentration were 45 min, 148.4 °C, and 2.04 % v/v, respectively. Cold plasma was then used as detoxification to reduce the amount of inhibitory compounds and acids. This method was capable of reducing the amounts of acetic acid, formic acid and furfural by 73, 83 and 68 % in hydrolyzed biomass, respectively. The biomass was fermented in a PD for 20 days and compared with a conventional digester (CD). The obtained results showed that the PD could increase the efficiency of bioethanol by 37 % in the detoxified state and 22 % in the non-detoxified state after 20 days of fermentation compared to the CD. Moreover, H₂S, CO and O₂ were measured during fermentation process. In PD, the amount of H₂S and O₂ was lower than CD, but CO was significantly higher in the PD.

Conversion of Lignocellulose for Bioethanol Production, Applied in Bio-Polyethylene Terephthalate

The increasing demand for petroleum-based polyethylene terephthalate (PET) grows population impacts daily. A greener and more sustainable raw material, lignocellulose, is a promising replacement of petroleum-based raw materials to convert into bio-PET. This paper reviews the recent development of lignocellulose conversion into bio-PET through bioethanol reaction pathways. This review addresses lignocellulose properties, bioethanol production processes, separation processes of bioethanol, and the production of bio-terephthalic acid and bio-polyethylene terephthalate. The article also discusses the current industries that manufacture alcohol-based raw materials for bio-PET or bio-PET products. In the future, the production of bio-PET from biomass will increase due to the scarcity of petroleum-based raw materials.

Technical Aspects of Biofuel Production from Different Sources in Malaysia—A Review

Due to the depletion of fossil fuels, biofuel production from renewable sources has gained interest. Malaysia, as a tropical country with huge resources, has a high potential to produce different types of biofuels from renewable sources. In Malaysia, biofuels can be produced from various sources, such as lignocellulosic biomass, palm oil residues, and municipal wastes. Besides, biofuels are divided into two main categories, called liquid (bioethanol and biodiesel) and gaseous (biohydrogen and biogas). Malaysia agreed to reduce its greenhouse gas (GHG) emissions by 45% by 2030 as they signed the Paris agreement in 2016. Therefore, we reviewed the status and potential of Malaysia as one of the main biofuel producers in the world in recent years. The role of government and existing policies have been discussed to analyze the outlook of the biofuel industries in Malaysia.

Review of Solvents Based on Biomass for Mitigation of Wax Paraffin in Indonesian Oilfield

This paper presents a review of the expectations and challenges of using biomass in the prevention and slowing of paraffin wax deposition that takes place during the crude oil production process. The inhibition of the deposition process involves the use of solvents from biomass that are generally available around the crude oil production field. The processes used to scale down the precipitation of wax include mixing crude oil with the manufacturer’s solvent composed of toluene and xylene. The goal is to assess solvents sourced from biomass that are capable to slow down the wax deposition process. Wax appearance temperature is an important characteristic to evaluate the possible wax precipitation of a given fluid. Wax precipitation can be reduced by using some chemical additives, often called the pour point depressant. This additive is expected to be produced from local biomass which can compete with solvents currently produced on the market.