Process simulation and life cycle assessment of converting autoclaved municipal solid waste into butanol and ethanol as transport fuels

Biobutanol production from underutilized substrates using Clostridium: Unlocking untapped potential for sustainable energy development

The increasing demand for sustainable energy has brought biobutanol as a potential substitute for fossil fuels. The Clostridium genus is deemed essential for biobutanol synthesis due to its capability to utilize various substrates. However, challenges in maintaining fermentation continuity and achieving commercialization persist due to existing barriers, including butanol toxicity to Clostridium, low substrate utilization rates, and high production costs. Proper substrate selection significantly impacts fermentation efficiency, final product quality, and economic feasibility in Clostridium biobutanol production. This review examines underutilized substrates for biobutanol production by Clostridium, which offer opportunities for environmental sustainability and a green economy. Extensive research on Clostridium, focusing on strain development and genetic engineering, is essential to enhance biobutanol production. Additionally, critical suggestions for optimizing substrate selection to enhance Clostridium biobutanol production efficiency are also provided in this review. In the future, cost reduction and advancements in biotechnology may make biobutanol a viable alternative to fossil fuels.

Assessing the environmental footprints and material flow of 2,3-butanediol production in a wood-based biorefinery

This study aims to scrutinize and compare the environmental impacts of biobased 2,3-butanediol (BDO) and its fossil-based counterpart. BDO is a fundamental chemical in various industries, traditionally derived from petroleum sources. Wood residues, largely available in Nordic countries, are sustainable alternative feedstocks, offering potential environmental benefits. Material flow analysis followed by consequential life cycle assessment (LCA) were employed to quantify the potential environmental burdens associated with various biorefinery stages of wood-based BDO production. The findings indicated that refraining from wood combustion and, instead, utilizing wood in a biorefinery to produce BDO as the main product, with methane and fertilizer as coproducts from the waste residue, resulted in 125%, 52%, and 90% better environmental performance regarding human health, climate change, and resource scarcity, respectively, compared to fossil-based BDO production. The results offer valuable insights for technology developers and policymakers, empowering them to make informed decisions and support sustainable practices.

Biorefinery development, techno-economic evaluation and environmental impact analysis for the conversion of the organic fraction of municipal solid waste into succinic acid and value-added fractions

The organic fraction of municipal solid waste (OFMSW) was used for biorefinery development within a circular bioeconomy context towards extraction of lipids/fats and proteins with 100% and 68% recovery yields, respectively, as well as succinic acid (SA) production. A nutrient-rich hydrolysate (89.1 g/L sugars) produced using crude enzymes derived via solid state fermentation of Aspergillus awamori, was employed in Actinobacillus succinogenes fermentation leading to 31.7 g_SA/L with 0.68 g/g yield and 0.67 g/L/h productivity. The SA minimum selling price ($1.13-2.39/kg_SA) considering 60,000 t_SA/year production varied depending on co-product market prices and OFMSW management fees. The biorefinery using 1000 kg OFMSW contributes 35% lower CO₂ emissions than conventional processes for the production of 105 kg vegetable oil, 87 kg vegetable protein and 206.4 kg fossil-SA considering also the CO₂ emissions due to OFMSW landfilling. The proposed OFMSW biorefinery leads to cost-competitive SA production with lower CO₂ emissions for OFMSW treatment.

Recent advances in valorization of organic municipal waste into energy using biorefinery approach, environment and economic analysis

Researcher's all around works on a copious technique to lessen waste production and superintend the waste management for long-term socio-economic and environmental benefits. Value-added products can be produced from municipal waste by using holistic and integrated approaches. In this review, a detail about the superiority of the different methods like anaerobic digestion, biofuel production, incineration, pyrolysis and gasification were used for the conversion of municipal waste to feedstock for alternate energy and its economic- environmental impacts were consolidated. Most conversion techniques were environmentally friendly to manage municipal waste. The biological process was more economically feasible compare to the thermal process, for the reason thermal process required a large amount of capital investment and energy utilization. In the thermal process, gasification shows low emission, and pyrolysis shows low capital investment and economically feasible compare to other thermal processes. Waste to energy technology significantly reduced the emission and energy demand.

Sustainable biofuels and bioplastic production from the organic fraction of municipal solid waste

Municipal solid waste is an environmental threat worldwide; however, the organic fraction of municipal solid waste (OF-MSW) has a great potential for the generation of fuels and high-value products. In the current study, OF-MSW was utilized for the production of ethanol, hydrogen, as well as 2,3-butanediol, an octane booster, by using Enterobacter aerogenes. Furthermore, a promising alternative to non-biodegradable petrochemical-based polymers, polyhydroxyalkanoates (PHAs), was produced. The OF-MSW was first pretreated by an acetic acid catalyzed ethanol organosolv pretreatment at 120 and 160 °C followed by enzymatic hydrolysis of the residual solids. The residual unhydrolyzed solids resulting from enzymatic hydrolysis were further anaerobically digested for methane production. The enzymatic hydrolysis of the solids prepared at 120 °C for 60 min led to the production of hydrolysate with the highest glucose production yield of 498.5 g/kg dry untreated OF-MSW, which was fermented to 139.1 g 2,3-butanediol, 98.3 g ethanol, 28.6 g acetic acid, 71.4 L biohydrogen, and 40 g PHAs. Moreover, 23.1 L biomethane was produced through the anaerobic digestion of the enzymatic hydrolysis residue solids. Thus, appreciable amounts of energy (8236.9 kJ) and an eco-friendly bioplastic were produced by the valorization of carbon sources available in OF-MSW.

Life Cycle Impact Assessment of Garbage-Classification Based Municipal Solid Waste Management Systems: A Comparative Case Study in China

Confronted with a series of problems caused by surging generation of municipal solid waste (MSW), the Chinese central and local governments have promulgated and implemented policies to deal with them, including promotions of the classification of MSW. However, to date, practical knowledge and understanding about benefits for garbage classification from its environmental performance perspective is still limited. The present study is purposed to comprehensively investigate the environmental effects of garbage classification on municipal solid waste management (MSWM) systems based on three proposed garbage classification scenarios in China, via a comparative life cycle impact assessment (LCIA). Taking advantage of Impact Assessment of Chemical Toxics (IMPACT) 2002+ method, this comparative LCIA study can quantitatively evaluate midpoint, endpoint, and single scored life cycle impacts for the studied MSWM systems. A Monte Carlo uncertainty analysis is carried out to test the effectiveness and reliabilities of the LCIA results. The LCIA and uncertainty analysis results show that MSWM systems based on various garbage classification scenarios have significant variations in the studied midpoint, endpoint, and single scored environmental impacts. Different garbage classification scenarios have their individual environmental-friendly superiority for specific impact categories. Overall, results of this study demonstrate that MSW treatment systems integrated with garbage classification are more environmentally friendly by comparison with non-classification; and that the more elaborate the level of MSW classification, the smaller its impacts on the environment.

Robust microorganisms for biofuel and chemical production from municipal solid waste

Background

Worldwide 3.4 billion tonnes of municipal solid waste (MSW) will be produced annually by 2050, however, current approaches to MSW management predominantly involve unsustainable practices like landfilling and incineration. The organic fraction of MSW (OMSW) typically comprises ~ 50% lignocellulose-rich material but is underexplored as a biomanufacturing feedstock due to its highly inconsistent and heterogeneous composition. This study sought to overcome the limitations associated with studying MSW-derived feedstocks by using OMSW produced from a realistic and reproducible MSW mixture on a commercial autoclave system. The resulting OMSW fibre was enzymatically hydrolysed and used to screen diverse microorganisms of biotechnological interest to identify robust species capable of fermenting this complex feedstock.

Results

The autoclave pre-treated OMSW fibre contained a polysaccharide fraction comprising 38% cellulose and 4% hemicellulose. Enzymatic hydrolysate of OMSW fibre was high in d-glucose (5.5% w/v) and d-xylose (1.8%w/v) but deficient in nitrogen and phosphate. Although relatively low levels of levulinic acid (30 mM) and vanillin (2 mM) were detected and furfural and 5-hydroxymethylfurfural were absent, the hydrolysate contained an abundance of potentially toxic metals (0.6% w/v). Hydrolysate supplemented with 1% yeast extract to alleviate nutrient limitation was used in a substrate-oriented shake-flask screen with eight biotechnologically useful microorganisms (Clostridium saccharoperbutylacetonicum, Escherichia coli, Geobacillus thermoglucosidasius, Pseudomonas putida, Rhodococcus opacus, Saccharomyces cerevisiae, Schizosaccharomyces pombe and Zymomonas mobilis). Each species’ growth and productivity were characterised and three species were identified that robustly and efficiently fermented OMSW fibre hydrolysate without significant substrate inhibition: Z. mobilis, S. cerevisiae and R. opacus, respectively produced product to 69%, 70% and 72% of the maximum theoretical fermentation yield and could theoretically produce 136 kg and 139 kg of ethanol and 91 kg of triacylglycerol (TAG) per tonne of OMSW.

Conclusions

Developing an integrated biorefinery around MSW has the potential to significantly alleviate the environmental burden of current waste management practices. Substrate-oriented screening of a representative and reproducible OMSW-derived fibre identified microorganisms intrinsically suited to growth on OMSW hydrolysates. These species are promising candidates for developing an MSW biorefining platform and provide a foundation for future studies aiming to valorise this underexplored feedstock.

Efficient biohydrogen and advanced biofuel coproduction from municipal solid waste through a clean process

The cleanest form of energy, i.e., biohydrogen, and advanced biofuel, i.e., biobutanol, were produced from the organic fraction of municipal solid waste (OFMSW). Ethanol as a byproduct of this process was used for the pretreatment of this substrate, and this pretreatment was improved by other process byproducts, i.e., acetic acid and butyric acid. The pretreatment was conducted with 85% ethanol and 0-1% (w/w) acetic/butyric acid at 120 and 160 °C for 30 min. The pretreatment catalyzed by 1% (w/w) acetic acid at 120 °C resulted in a hydrolysate with 49.8 g/L total fermentable sugars, which was fermented to the highest overall yield of acetone, butanol, and ethanol (ABE) and hydrogen. Through this process, 114.1 g butanol, 43.8 g acetone, 15.1 g ethanol, 97.5 L hydrogen were obtained from each kg of OFMSW, producing 270 g ABE and 151 L H₂ from each kg of substrate, corresponding to 6000 kJ energy production.

Challenges in Quantifying Greenhouse Gas Impacts of Waste-Based Biofuels in EU and US Biofuel Policies: Case Study of Butanol and Ethanol Production from Municipal Solid Waste

Conversion of wastes to biofuels is a promising route to provide renewable low-carbon fuels, based on a low- or negative-cost feedstock, whose use can avoid negative environmental impacts of conventional waste treatment. However, current policies that employ LCA as a quantitative measure are not adequate for assessing this type of fuel, given their cross-sector interactions and multiple potential product/service streams (energy, fuels, materials, waste treatment service). We employ a case study of butanol and ethanol production from mixed municipal solid waste to demonstrate the challenges in using life cycle assessment to appropriately inform decision-makers. Greenhouse gas emissions results vary from -566 gCO₂ eq/MJ_biofuel (under US policies that employ system expansion approach) to +86 gCO₂ eq/MJ_biofuel and +23 gCO₂ eq/MJ_biofuel (under initial and current EU policies that employ energy-based allocation), relative to gasoline emissions of +94 gCO₂ eq. LCA methods used in existing policies thus provide contradictory information to decision-makers regarding the potential for waste-based biofuels. A key factor differentiating life cycle assessment methodologies is the inclusion of avoided impacts of conventional waste treatment in US policies and their exclusion in EU policies. Present EU rules risk discouraging the valorisation of wastes to biofuels thus forcing waste toward lower-value treatment processes and products.