Investigation of physico-chemical properties of hydrochar and composition of bio-oil from the hydrothermal treatment of dairy manure: Effect of type and usage volume of extractant

Supramolecular deep eutectic solvent: a powerful tool for pre-concentration of trace metals in edible oil

The utilization of supramolecular deep eutectic solvent eddy-assisted liquid-liquid microextraction utilizing 2-hydroxypropyl β-cyclodextrin (SUPRADES) has been identified as a successful method for pre-enriching Cu, Zn, and Mn in vegetable oil samples. Determination of each element was conducted by inductively coupled plasma optical emission spectrometry (ICP-OES) after digestion of metal-enriched phases. Various parameters were examined, including the composition of SUPRADES species [2HP-β-CD: DL-lactic acid], a cyclodextrin mass ratio of 20 wt%, a water bath temperature of 75 °C, an extractor volume of 800 μL, a dispersant volume of 50 μL, and an eddy current time of 5 min. Optimal conditions resulted in extraction rates of 99.6% for Cu, 105.2% for Zn, and 101.5% for Mn. The method exhibits a broad linear range spanning from 10 to 20,000 μg L-1, with determination coefficients exceeding 0.99 for all analytes. Enrichment coefficients of 24, 21, and 35 were observed. Limits of detection ranged from 0.89 to 1.30 μg L-1, while limits of quantification ranged from 3.23 to 4.29 μg L-1. The unique structural characteristics of the method enable the successful determination of trace elements in a variety of edible vegetable oils.

Speciation, leachability, and phytoaccessibility of heavy metals during thermochemical liquefaction of contaminated peanut straw

In this study, the speciation, leachability, phytoaccessibility, and environmental risks of heavy metals (Cd, Zn, and Cu) during liquefaction of contaminated peanut straw in ethanol at different temperatures (220, 260, 300, 340, and 380 °C) were comprehensively investigated. The results showed that elevated temperatures facilitated heavy metal accumulation in the biochar. The acid-soluble/exchangeable and reducible fraction percentages of heavy metals were substantially reduced in the biochar after liquefaction as the temperature increased, and the oxidizable fraction became the dominant heavy metal fraction, accounting for 44.14-78.67%. Furthermore, although an excessively high liquefaction temperature (380 °C) increased the residual fraction percentages of Zn and Cu, it was detrimental to Cd immobilization. The acid-soluble/exchangeable Cd in the contaminated peanut straw readily migrates to the bio-oil during liquefaction, with the highest concentration of 1.60 mg/kg at 260 °C liquefaction temperature, whereas Zn and Cu are predominantly bound to the unexchangeable fraction in the bio-oil. Liquefaction inhibited heavy metal leachability and phytoaccessibility in biochar, the lowest extraction rates of Cd, Zn, and Cu were 0.71%, 1.66% and 0.95% by diethylenetriamine pentaacetic acid, respectively. However, the leaching and extraction concentrations increased when the temperature was raised to 380 °C. Additionally, heavy metal risk was reduced from medium and high risk to no and low risk. In summary, liquefaction reduces heavy metal toxicity and the risks associated with contaminated peanut straw, and a temperature range of 300-340 °C for ethanol liquefaction can be considered optimal for stabilizing heavy metals.

Green solvents to enhance hydrochar quality and clarify effects of secondary char

Several limitations hinder the industrial-scale implementation of hydrothermal carbonization (HTC) of biomass, especially the quality of as-carbonized hydrochar. This work investigates solvent extraction of hydrochars to enhance their potential applications. Hydrochars were produced at several HTC temperatures (190, 220, 250 °C) from cellulose and extracted using combinations of green polar solvents (ethyl acetate, acetone, and methanol). Results show that the composition of the extractable fraction resembles that of the HTC liquor, rich in carboxylic acids and furan derivatives, while the non-extractable solid phase shows improved thermal profiles devoid of highly volatile compounds. Carbon microspheres (non-dissolvable secondary char) are unaffected by extraction. The organics adsorbed on the hydrochar surface comprise highly volatile species and solvent washing effectively removes them.

Optimization of hydrothermal liquefaction process for bio-oil products from kitchen residue under subcritical conditions

In this work, the process parameters of batch hydrothermal liquefaction of kitchen residue were optimized with the yield of bio-oil as reference, including reaction temperature, residence time and initial pressure. According to the experimental results, the bio-oil yield of kitchen residue was the highest (39.73%) under the reaction conditions of 6 MPa, 300 °C and 30 min. The elemental content and components of bio-oil were characterized by organic element analyzer and gas chromatography/mass spectrometer. The surface and structural properties of biochar were detected and analyzed by Fourier transform infrared spectrometer, scanning electron microscope and surface area and porosity analyzer.

Enhanced removal of Cr(VI) by nitrogen-doped hydrochar prepared from bamboo and ammonium chloride

N-doped biochar can effectively eliminate toxic Cr(VI). Here, N-doped hydrochar (NHC) was successfully synthesized by one-pot hydrothermal carbonization (HTC) of NH₄Cl and bamboo, and employed to adsorb Cr(VI). The specific surface area, pore volume, and carbon and nitrogen contents of NHC all increase compared with the undoped hydrochar (HC). NH₄Cl acts as a cheap nitrogen source to enhance the nitrogen content of hydrochar and as an acid catalyst to accelerate hydrochar carbonization. Adsorption experiments show NHC has higher adsorption capacity than HC for Cr(VI). XPS and FTIR imply the dominant mechanisms of adsorbing Cr(VI) onto two hydrochars are electrostatic attraction, reduction and complexation, but the contributions of surface functional groups in two hydrochars for elimination of Cr(VI) differ. The doped nitrogen in NHC is pivotal in adsorbing and reducing Cr(VI). Hence, NHC prepared from bamboo and NH₄Cl by one-step HTC is a cheap and efficient adsorbent to eliminate aqueous Cr(VI).

Activated Carbon from Palm Date Seeds for CO2 Capture

The process of carbon dioxide capture and storage is seen as a critical strategy to mitigate the so-called greenhouse effect and the planetary climate changes associated with it. In this study, we investigated the CO₂ adsorption capacity of various microporous carbon materials originating from palm date seeds (PDS) using green chemistry synthesis. The PDS was used as a precursor for the hydrochar and activated carbon (AC). Typically, by using the hydrothermal carbonization (HTC) process, we obtained a powder that was then subjected to an activation step using KOH, H₃PO₄ or CO₂, thereby producing the activated HTC-PDS samples. Beyond their morphological and textural characteristics, we investigated the chemical composition and lattice ordering. Most PDS-derived powders have a high surface area (>1000 m² g⁻¹) and large micropore volume (>0.5 cm³ g⁻¹). However, the defining characteristic for the maximal CO₂ uptake (5.44 mmol g⁻¹, by one of the alkaline activated samples) was the lattice restructuring that occurred. This work highlights the need to conduct structural and elemental analysis of carbon powders used as gas adsorbents and activated with chemicals that can produce graphite intercalation compounds.