One-year follow-up of microbial diversity in bioaerosols emitted in a waste sorting plant in France

Microbial contamination in grocery stores from Portugal and Spain - The neglected indoor environment to be tackled in the scope of the One Health approach

Microbial contamination in grocery shops (GS) should be evaluated since food commodities are commonly handled by workers and customers increasing the risk of food contamination and disease transmission. The aim of this study was to evaluate the microbial contamination in Portuguese and Spanish GS with a multi-approach protocol using passive (electrostatic dust cloths and surface swabs) sampling methods. The molecular detection of Aspergillus sections, mycotoxin analysis, screening of azole resistance as well as cytotoxicity measurement were conducted to better estimate the potential health risks of exposure and to identify possible relations between the risk factors studied. Fruits/vegetables sampling location was the one identified has being the most contaminated (bacteria and fungi) area in GS from both countries. Aspergillus section Fumigati and Fusarium species were observed in samples from Portuguese groceries with reduced susceptibilities to azoles commonly used in the clinical treatment of fungal infections. Fumonisin B2 was detected in Portuguese GS possible unveiling this emergent threat concerning occupational exposure and food safety. Overall, the results obtained raise concerns regarding human health and food safety and must be surveilled applying a One Health approach.

Divergent TLR2 and TLR4 Activation by Fungal Spores and Species Diversity in Dust from Waste Sorting Plants

This manuscript presents the results of an exploratory study on the relationships between NF-κB response through Toll-like receptor (TLR) activation by dust characterized by fungal spore concentrations and species diversity. Personal total dust samples were collected from Norwegian waste sorting plants and then characterized for fungal spores and fungal species diversity, as well as for other bioaerosol components, including endotoxins and actinobacteria. The ability of the dust to induce an NF-κB response by activating TLR2 and TLR4 in vitro was evaluated, as well as the relationship between such responses and quantifiable bioaerosol components. The average concentrations of bioaerosols were 7.23 mg total dust m^-3, 4.49 × 10⁵ fungal spores m^-3, 814 endotoxin units m^-3, and 0.6 × 10⁵ actinobacteria m^-3. The mean diversity measurements were 326, 0.59, and 3.39 for fungal richness, evenness, and Shannon index, respectively. Overall, fungal operational taxonomic units (OTUs) belonging to the Ascomycota phylum were most abundant (55%), followed by Basidiomycota (33%) and Mucoromycota (3%). All samples induced significant NF-κB responses through TLR2 and TLR4 activation. While fungal spore levels were positively associated with TLR2 and TLR4 activation, there was a trend that fungal species richness was negatively associated with the activation of these receptors. This observation supports the existence of divergent immunological response relationships between TLR activation and fungal spore levels on one hand and between TLR activation and fungal species diversity on the other. Such relationships seem to be described for the first time for dust from waste facilities. IMPORTANCE This manuscript presents results on multifactorial characterization of bioaerosol exposure in Norwegian waste sorting plants and the potential of such airborne dust to induce NF-κB reactions through TLR2 and TLR4 activations in an in vitro reporter cell model system. Our data revealed that increasing fungal spore levels in the dust is associated with increased activation of TLR2 and TLR4, whereas increasing fungal OTU richness is associated with decreasing activation of these receptors. The NF-κB-induced responses by the collected dust represent, therefore, effective measures of potential key immunological effects induced by a complex mixture of hazardous components, including characterized factors such as endotoxins, fungal spores, bacteria, and many other uncharacterized components. The key immunological events reported here are suggested as holistic alternatives to today's bioaerosol exposure characterization approaches for epidemiological studies in the future.

Characteristics and health effects of particulate matter emitted from a waste sorting plant

Solid waste components can be recycled in waste paper and cardboard sorting plants (WPCSP) through a multistep process. This work collected 15 samples every six days from each of the 9 points selected to study the processes taking place in a WPCSP (135 particulate matter samples total). Examining the concentration and size fraction of particulate matter (i.e., PM₁, PM_2.5 and PM₁₀) in WPCSP is an essential issue to notify policy makers about the health impacts on exposed workers. The major activities for increasing of the concentration of PM in various processing units in the WPCSP, especially in hand-picking routes I and II were related to manual dismantling, mechanical grinding, mechanical agitation, and separation and movement of waste. The results of this work showed that a negative correlation between temperature and particulate matter size followed the order PM₁₀ > PM_2.5 > PM₁. Exposure to PM_2.5 and PM₁₀ in the WPCSP lead to possible risk (HI = 5.561 and LTCRs = 3.41 × 10^-6 to 9.43 × 10^-5 for PM_2.5 and HI = 7.454 for PM₁₀). The exposure duration and the previous concentrations had the most effect on the ILCRs and HQs for PM_2.5 and PM₁₀ in all sampling sites. Hence, because WPCSP are infected indoor environments (I/O ratio > 1), the use of control methods such as isolation of units, misting systems, blower systems equipped with bag houses, protective equipment, a mechanical ventilation system, and additional natural ventilation can reduce the amount of suspended PM, enhance worker safety, and increase the recycling rate.

Across-Shift Changes in Viable Nasal Bacteria among Waste-Incineration Plant Workers-A Pilot Study

The aim of this pilot study was to assess the time-related changes in viable nasal bacteria concentrations among waste-incineration plant (WIP) workers compared to a group of office building (OB) workers outside the plant. In total, 20 volunteers participated in the study, including 14 WIP and 6 OB workers. WIP workers were divided into two sub-groups: supervisory staff (SVS) and maintenance and repair workers (MRW). Nasal swabs were collected before and after the morning work shift. Airborne bacteria were sampled with a six-stage impactor to assess the bioaerosol size distribution. The analysis showed that a significant, almost three-fold increase in nasal bacterial concentration was found only among WIP workers, and this referred mainly to anaerobic species. The load of anaerobic bacteria at the beginning of work was 12,988 CFU/mL, and after work shift 36,979 CFU/mL (p < 0.01). Significant increases in microbial concentrations was found only in the MRW subgroup, among non-smoking workers only. The results showed increased bacterial concentration in WIP nasal samples for as many as 12 bacterial species, including, e.g., Streptococcus constellatus, Peptostreptococcus spp., E. coli, and P. mirabilis. These preliminary data confirmed that the nasal swab method was helpful for assessment of the workers’ real-time exposure to airborne bacteria.

Antimicrobial Resistance in the Environment: Towards Elucidating the Roles of Bioaerosols in Transmission and Detection of Antibacterial Resistance Genes

Antimicrobial resistance (AMR) is continuing to grow across the world. Though often thought of as a mostly public health issue, AMR is also a major agricultural and environmental problem. As such, many researchers refer to it as the preeminent One Health issue. Aerial transport of antimicrobial-resistant bacteria via bioaerosols is still poorly understood. Recent work has highlighted the presence of antibiotic resistance genes in bioaerosols. Emissions of AMR bacteria and genes have been detected from various sources, including wastewater treatment plants, hospitals, and agricultural practices; however, their impacts on the broader environment are poorly understood. Contextualizing the roles of bioaerosols in the dissemination of AMR necessitates a multidisciplinary approach. Environmental factors, industrial and medical practices, as well as ecological principles influence the aerial dissemination of resistant bacteria. This article introduces an ongoing project assessing the presence and fate of AMR in bioaerosols across Canada. Its various sub-studies include the assessment of the emissions of antibiotic resistance genes from many agricultural practices, their long-distance transport, new integrative methods of assessment, and the creation of dissemination models over short and long distances. Results from sub-studies are beginning to be published. Consequently, this paper explains the background behind the development of the various sub-studies and highlight their shared aspects.

Characteristics and assessing biological risks of airborne bacteria in waste sorting plant

Examining the concentration and types of airborne bacteria in waste paper and cardboard sorting plants (WPCSP) is an urgent matter to inform policy makers about the health impacts on exposed workers. Herein, we collected 20 samples at 9 points of a WPCSP every 6 winter days, and found that the most abundant airborne bacteria were positively and negatively correlated to relative humidity and temperature, respectively. The most abundant airborne bacteria (in units of CFU m^-3) were: Staphylococcus sp. (72.4) > Micrococcus sp. (52.2) > Bacillus sp. (30.3) > Enterococcus sp. (24.0) > Serratia marcescens (20.1) > E. coli (19.1) > Pseudomonas sp. (16.0) > Nocardia sp. (1.9). The lifetime average daily dose (LADD) for the inhalation and dermal routes for the intake of airborne bacteria ranged from 3.7 × 10^-3 ≤ LADD_Inhalation ≤ 2.07 × 10¹ CFU (kg d)^-1 and 4.75 × 10^-6 ≤ LADD_Dermal ≤ 1.64 × 10^-5 CFU (kg d)^-1, respectively. Based on a sensitivity analysis (SA), the concentration of airborne bacteria (C) and the exposure duration (ED) had the most effect on the LADD_Inhalation and LADD_Dermal for all sampling locations. Although the Hazard Quotient of airborne bacteria was HQ < 1, an acceptable level, the indoor/outdoor ratio (1.5 ≤ I/O ≤ 6.6) of airborne bacteria typically exceeded the threshold value (I/O > 2), indicating worker's exposure to an infected environment. Therefore, in the absence of sufficient natural ventilation the indoor ambient conditions of the WPCSP studied should be controlled by supplying mechanical ventilation.

Cytotoxicity of Aspergillus Section Fumigati Isolates Recovered from Protection Devices Used on Waste Sorting Industry

Safe working conditions must be guaranteed during waste sorting, which is crucial to maximizing recycling and reuse, in order to minimize workers’ exposure to chemical and biological hazards. This study determines the contribution of Aspergillus section Fumigati to the overall cytotoxicity of filtering respiratory protection devices (FRPD) and mechanic protection gloves (MPG) collected in 2019 from different workstations in one waste sorting industry in Portugal. The cytotoxicity of 133 Aspergillus section Fumigati isolates was determined as IC50 in human A549 epithelial lung cells and swine kidney cells, using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Aspergillus section Fumigati cytotoxicity results were compared with previous total cytotoxicity data from FRPD and MPG samples. A significant correlation was detected between the total cytotoxicity of samples and cytotoxicity of Aspergillus section Fumigati isolates in A549 cells (rS = −0.339, p = 0.030). The cytotoxicity of Aspergillus section Fumigati isolates explained 10.7% of the total cytotoxicity of the sample. On the basis of the comparison of cytotoxicity levels, it was possible to determine the contribution of Aspergillus section Fumigati isolates for the total cytotoxicity of protection devices used in the waste sorting industry. The results support in vitro toxicology as a relevant approach in risk assessments regarding cytotoxicity in passive sampling, and thus, useful in determining the contribution of relevant microbial contaminants to overall cytotoxicity. This approach can provide valuable answers in dose/response studies, and support innovations in risk characterization and their translation into occupational policies.

Review of biological risks associated with the collection of municipal wastes

In many countries, the management of household waste has recently changed with an increased focus upon waste sorting resulting in lower collection frequency for some waste fractions. A consequence of this is the potential for increased growth of microorganisms in the waste before collection, which can lead to an increased exposure via inhalation for waste collection workers. Through a review of the literature, we aimed to evaluate risks caused by waste collecting workers' exposure to bioaerosols and to illuminate potential measures to reduce the exposure. Across countries and waste types, median exposure to fungi, bacteria, and endotoxin were typically around 10⁴ colony forming units (cfu)/m³, 10⁴ cfu/m³, and 10 EU/m³, respectively. However, some studies found 10-20+ times higher or lower median exposure levels. It was not clear how different types of waste influence the occupational exposure levels. Factors such as high loading, ventilation in and cleaning of drivers' cabs, increased collection frequency, waste in sealed sacks, and use of hand sanitizer reduce exposure. Incidences of gastrointestinal problems, irritation of the eye and skin and symptoms of organic dust toxic syndrome have been reported in workers engaged in waste collection. Several studies reported a correlation between bioaerosol exposure level and reduced lung function as either a short or a long term effect; exposure to fungi and endotoxin is often associated with an inflammatory response in exposed workers. However, a better understanding of the effect of specific microbial species on health outcomes is needed to proceed to more reliable risk assessments. Due to the increasing recycling effort and to the effects of global warming, exposure to biological agents in this working sector is expected to increase. Therefore, it is important to look ahead and plan future measures as well as improve methods to prevent long and short-term health effects.

Occupational exposure to anaerobic bacteria in a waste sorting plant

The study focused on exposure assessment to bacterial aerosols and organic dust in waste sorting plant. Samples were collected at different workplaces of waste sorting cycle i.e.: waste press, reloading area, loading of conveyor belt, sorting cabin, sorting hall, and control room. A quantitative analysis of aerobic and anaerobic bacteria was supplemented by qualitative analysis of anaerobic biota with the use of culture-based methods and biochemical tests. In addition, inhalable dust concentrations were also evaluated. To confirm the presence of Clostridium genus, the PCR reaction with specific primers (Chis150f and ClostIr) was performed. The average concentration of total bacteria in waste sorting plant was 4347 CFU m^-3 (SD = 2439), of which 66% were anaerobic strains (2852 CFU m^-3; SD = 2127). It was found that about 24% of anaerobic bacteria belonged to Clostridium genus (682 CFU m^-3; SD = 633). The highest contamination with anaerobic bacteria was observed near the waste reloading plant (3740 CFU m^-3), and the lowest in the control room (850 CFU m^-3). The average concentration of inhalable dust in the waste sorting plant was 0.81 mg m^-3 (SD = 0.59). The correlation analysis showed that the presence of anaerobic bacteria, including clostridia was significantly determined by the microclimate parameters. Qualitative analysis showed the presence of 16 anaerobic species belonging to 9 genera, of which Actinomyces, Clostridium, and Gemella were present at all workplaces. The molecular analysis confirmed the presence of Clostridium genus in both bioaerosol and settled dust samples.Implications: The study showed that anaerobic bacteria should be taken into account as an important component of this microbiota when assessing the exposure of waste sorting workers to biological agents. However, future studies should investigate more precisely how the composition of sorted waste as well as the season can affect the diversity of anaerobic bacteria in this working environment. More attention should be paid to regular cleaning of equipment surfaces in the plant, as deposited organic dust is an important reservoir of anaerobic bacteria, including those of a potentially pathogenic nature.

A characterization of bioaerosols in biowaste pretreatment plants in relation to occupational health

Occupational exposure to microorganisms can be associated with adverse health outcomes. In this study, we assessed exposure to bioaerosols in two biowaste pretreatment plants in Denmark, which differed in location (city or countryside) and how they were built ('closed-off processes' or 'open processes'). Bioaerosol exposures were characterized by microbial concentrations in personal, stationary, sedimented dust, and hand samples, and their size distribution was assessed. Furthermore, species were identified by matrix-assisted laser desorption-ionisation time-of-flight mass spectrometry (MALDI-TOF MS), and inhalable dust, endotoxin, biofilm production, the total inflammatory potential, and fungicide resistance to four fungicides (amphotericin B, caspofungin acetate, itraconazole, voriconazole) were determined. Bacterial and fungal concentrations were on average (GM) in the order of 10⁴ cfu/m³, but ranged from 10² to 10⁸ cfu/m³. Several species which may cause health problems were identified. Personal endotoxin exposures were on average 28 EU/m³, but both personal and stationary samples ranged from 0.6 to 2035 EU/m³. Bioaerosols had the potential to form biofilms and to induce inflammation as measured in a human cell line. Exposures were higher in the plants that outdoor reference values. Higher exposures were found in the 'open process' plant, such as in microbial concentrations, species richness, endotoxin, biofilm production, and the total inflammatory potential. Six out of 28 tested Aspergillus fumigatus isolates were resistant to fungicides (amphotericin B and voriconazole). In conclusion, there is a high exposure to bioaerosols during work in biowaste pretreatment plants, however, results also suggests that how the plant is built and functions may affect the exposures.

Bioburden contamination and Staphylococcus aureus colonization associated with firefighter's ambulances

Ambulance vehicles are an essential part of emergency clinical services. Bioburden control in ambulances, through cleaning and disinfection, is crucial to minimize hospital-acquired infections, cross contamination and exposure of patients and ambulances' crew. In Portugal, firefighter crews are responsible, besides fire extinction, for first aid and urgent pre-hospital treatment. This study assessed the bioburden in Portuguese firefighters' ambulances with a multi-approach protocol using active and passive sampling methods. Fungal resistance profile and mycotoxins detection in ambulances' ambient, and S. aureus (SA) prevalence and resistance profile in ambulances' ambient and colonization in workers were also investigated. Toxigenic fungi with clinical relevance, namely Aspergillus section Fumigati, were found on ambulance's air in the hazardous dimension range. Interestingly, surface contamination was higher after cleaning in several sampling sites. Prevalence of S. aureus was 3% in environmental samples, of which 2% were methicillin-sensitive (MSSA) and 1% methicillin-resistant (MRSA). About 2.07 fungal species were able to grow in at least one azole, ranging from one (44% samples) to five (6% samples) species in each azole. Mycotoxins were detected in mops and electrostatic dust cloths. Colonization by S. aureus in the firefighter crew was observed with a high associated prevalence, namely 48%, with a 24% prevalence of MSSA (8/33) and 21% of MRSA (7/33). Additional studies are needed to determine the potential risk of infection transmission between different vehicle fleets and under varying conditions of use. This will strengthen the paramedic sector's mission to save lives without putting their own health and safety at risk.