Study on the performance of HNO3-modified biochar for enhanced medium temperature anaerobic digestion of food waste

Role of KOH-activated biochar on promoting anaerobic digestion of biomass from Pennisetumgianteum

Pennisetum giganteum is a promising non-food crop feedstock for biogas production due to its high productivity and bio-methane potential. However, the accumulation of volatile fatty acids (VFA) usually restricts the conversion efficiency of P. giganteum biomass (PGB) during anaerobic digestion (AD). Here, the role of KOH-activated biochar (KB) in improving the AD efficiency of PGB and the related mechanisms were investigated in detail. The results revealed that KB exhibited excellent electrical conductivity, electron transfer capacity and specific capacitance, which might be related to the decrease in the electron transfer resistance after adding KB to the AD process. In addition, the KB addition not only reinforced metabolisms of energy and VFAs but also promoted the conversion of VFAs to methane, leading to a 52% increase in the methane production rate. Bioinformatics analysis showed that Smithella and Methanosaeta were key players in the KB-mediated AD process of PGB. The stimulatory effect of methanogenesis probably resulted from the establishment of direct interspecies electron transfer (DIET) between VFA-oxidizing acetogens (e.g., Smithella) and Methanosaeta. These findings provided a key step to improve the PGB-based AD process.

Acid treatment for enhancing Hg0 removal efficiency of chlorine-loaded biochar: mechanism and kinetic analysis

Adsorbents modified solely with chlorine have limited effectiveness in removing mercury at high temperatures. This study aims to investigate the influence of various acid (HNO3, H2SO4, and H2O2) loadings on the removal efficiency of mercury from NH4Cl-modified adsorbents. The objective is to develop rice straw carbon adsorbents that are both more efficient and cost-effective. The experiments were conducted on a fixed bed experimental platform, with SEM and BET to observe the physical property changes of the modified char samples. XPS analysis was employed to analyze the effects of oxygen, chlorine, and sulfur functional groups. Additionally, a kinetic model was used to investigate the interaction mechanism between the adsorbent and mercury. The findings demonstrate that co-modification surpasses the use of NH4Cl alone, with the combination of NH4Cl and HNO3 yielding the best results. Co-modification enhances the development of a more refined and compact pore structure on the char surface, promoting the physical adsorption of mercury. Moreover, an increased presence of chlorine and oxygen functional groups is observed on the char surface, particularly in the NH4Cl and HNO3 co-modified samples, further enhancing the chemical adsorption capacity of the char. The results from the kinetic analysis support this conclusion. Furthermore, the adsorption process of Hg0 relies on both external mass transfer and chemical adsorption, with the chemical adsorption process playing a more significant role as the controlling factor.

Functional biochar in enhanced anaerobic digestion: Synthesis, performances, and mechanisms

Anaerobic digestion technology is crucial in bioenergy recovery and organic waste management. At the same time, it often encounters challenges such as low organic digestibility and inhibition of toxic substances, resulting in low biomethane yields. Biochar has recently been used in anaerobic digestion to alleviate toxicity inhibition, improve the stability of anaerobic digestion processes, and increase methane yields. However, the practical application of biochar is limited, for the properties of pristine biochar significantly affect its application in anaerobic digestion. Although much research focuses on understanding original biochar's fundamental properties and functionalization, there are few reviews on the applications of functional biochar and the effects of critical properties of pristine biochar on anaerobic digestion. This review systematically reviewed functionalization strategies, key performances, and applications of functional biochar in anaerobic digestion. The properties determining the role of biochar were reviewed, the synthesis methods of functional biochar were summarized and compared, the mechanism of functional biochar was discussed, and the factors affecting the function of functional biochar were reviewed. This review provided a comprehensive understanding of functional biochar in anaerobic digestion processes, which would be helpful for the development and applications of engineered biochar.

The degradation of p-nitrophenol by biochar is dominated by its electron donating capacity

The typical aromatic and phenolic pollutant, p-nitrophenol (PNP), is extensively used in the industry and can seriously threaten the environmental health. Biochar, as a solid carbon-rich material, can directly degrade PNP. It has been reported that the PNP degradation by biochar is closely related to the electron exchange capacity of biochar (the sum of electron donating and accepting capacities). However, the roles of electron donating and accepting capacity of biochar in PNP degradation have not been distinguished before. In this study, the biochar samples were chemically modified to manipulate the electron donating and accepting capacities of biochar samples. Compared with pristine biochar (3.67 %), modified biochar had higher degradation efficiencies of PNP (>7.81 %). The strictly positive correlation between the electron donating capacities and the PNP degradation rates of biochar samples (r = 0.98, p < 0.05) indicated that the PNP degradation process by biochar is dominated by the reduction process. Although both the oxidation and reduction degradation products were found in the degradation system, the quenching experiment of OH, a key radical in the process of oxidation degradation, further proved that the oxidation process just played a minor role (<10 %) in the PNP degradation by biochar. This study shed light on the degradation mechanism of PNP by biochar and could promote the application of biochar in the pollution remediation.

Evaluation of activated pyrochar for boosting anaerobic digestion: Performances and microbial community

In this study, the effects of CO2-activated/non-activated pyrochars (PCs) from cornstalk, cotton straw, and rice straw on anaerobic digestion (AD) performances and microbial characteristics were investigated. The maximum biogas production rate (2.2 L/L/d) with a methane content of 73% was obtained from the AD with CO2-activated cotton straw PC. The activated PC mainly played a strengthening role in the early and middle stages of AD. Specifically, the cornstalk PC could greatly relieve acid inhibition, and cotton straw PC had a significantly positive effect on the regulation of ammonia nitrogen concentration. The rare genera like Verrucomicrobia had obvious differences among groups of AD with PCs. Regarding differential metabolites, cornstalk PC-N2 displayed a positive correlation with isoleucyl-alanine, while exhibiting a negative correlation with deoxyinosine, and the corresponding relative expression levels were + 3.0 and -2.4, respectively. Overall, gas-activated PCs could promote methane production and affect the composition of microbial community.

Wood biochar enhances methanogenesis in the anaerobic digestion of chicken manure under ammonia inhibition conditions

The process of breaking down chicken manure through anaerobic digestion is an effective waste management technology. However, chicken manure can be a challenging feedstock, causing ammonia stress and digester instability. This study examined the impacts of adding wood biochar and acid-alkali-treated wood biochar to anaerobically digest chicken manure under conditions of ammonia inhibition. The results highlighted that only the addition of 5 % acid-alkali-treated wood biochar by volume can achieve cumulative methane production close to the typical methane potential range of chicken manure. The treated wood biochar also exhibited highest total ammonia nitrogen removal compared to the Control treatment. Scanning Electron Microscope revealed growing interactions between biochar and methanogens over time. Real-time polymerase chain reaction showed that treated wood biochar produced the highest number of bacterial biomass. In addition, 16S amplicon-based sequencing identified a more robust archaeal community from treated biochar addition. Overall, the acid-alkali treatment of biochar represents an effective method of modifying biochar to improve its performance in anaerobic digestion.

Effects of upward flow rate and modified biochar location on the performance and microecology of an anaerobic reactor treating kitchen waste

Increasing the value of food waste through anaerobic digestion is an attractive strategy. Meanwhile, the anaerobic digestion of kitchen waste also faces some technical challenges. In this study, four EGSB reactors were equipped with Fe-Mg-chitosan bagasse biochar at different locations, and the reflux pump flow rate was increased to change the upward flow rate of the reactor. The effects of adding modified biochar at different locations under different upward flow rate on the efficacy and microecology of anaerobic reactors treating kitchen waste were investigated. Results showed that Chloroflexi was the dominant microorganism when the modified biochar was added to the lower, middle, and upper parts of the reactor and mixed in the reactor, accounting for 54%, 56%, 58%, and 47%, respectively, on day 45. With the increased upward flow rate, the abundance of Bacteroidetes and Chloroflexi increased, while Proteobacteria and Firmicutes decreased. It was worth noting that the best COD removal effect was achieved when the anaerobic reactor upward flow rate was v2 = 0.6 m/h and the modified biochar was added in the upper part of the reactor, during which the average COD removal rate reached 96%. In addition, mixing modified biochar throughout the reactor while increasing the upward flow rate provided the greatest stimulus for the secretion of tryptophan and aromatic proteins in the sludge extracellular polymeric substances. The results provided a certain technical reference for improving the efficiency of anaerobic digestion of kitchen waste and scientific support for the application of modified biochar to the anaerobic digestion process.

Effect of Temperature on Anaerobic Fermentation of Poplar Ethanol Wastewater: Performance and Microbial Communities

Temperature plays an important role in anaerobic digestion (AD), and different substrates have different optimum temperatures in AD. However, the effect of temperature on the performance of AD when cellulosic ethanol wastewater was used as a substrate was rarely reported. Therefore, the digestion characteristics of cellulosic ethanol wastewater at 25, 35, 45, and 55 °C were investigated, and the microbial communities of the sludge sample were analyzed after fermentation. The results showed that the cumulative methane production was the highest at 55 °C, 906.40 ± 50.67 mL/g VS, which was 81.06, 72.42, and 13.33% higher than that at 25, 35, and 45 °C, respectively. The content of methane was 68.13, 49.26, 70.46, and 85.84% at the terminal period of fermentation at temperatures of 25, 35, 45, and 55 °C, respectively. The testing of volatile fatty acids (VFAs) indicated that the accumulation of VFAs did not occur when the fermentation was carried out at 25, 35, and 45 °C; however, the VFA content at 55 °C was much larger than that in the three groups (25, 35, and 45 °C), and the ratio of propionic acid to acetic acid was larger than 1.4 at the late stage of fermentation, so it inhibited the fermentation. The diversity of the microbial community indicated that the floral structure and metabolic pathway of fermentation were alike at 25 and 35 °C. Firmicutes and Proteobacteria were the main flora covering the 25-55 °C-based phylum or below it. The relative abundance of Methanosaeta was the highest when fermentation temperatures were 25 and 35 °C; however, its relative abundance decreased sharply and the relative abundance of Methanosarcina increased substantially when the temperature increased from 35 to 45 °C, which indicated that Methanosarcina can exist in higher temperatures. At the same time, hydrogenotrophic methanogens such as Methanoculleus and Methanothermobacter were dominant when fermentation temperatures were 45 and 55 °C, which indicated that the metabolic pathway changed from acetoclastic methanogenesis to hydrogenotrophic methanogenesis.

Maximizing the energy recovery from rice straw through two-step conversion using eggshell-catalytic pyrolysis followed by enhanced anaerobic digestion using calcium-rich biochar

Anaerobic digestion of lignocelluloses for biogas production is greatly restricted by the poor biomass degradability. Herein, a novel approach is suggested to enhance the energy recovery from rice straw through a two-step conversion using eggshell-based catalytic pyrolysis followed by biochar-based anaerobic co-digestion. Pyrolysis with eggshell significantly enhanced the crude bio-oil yield by 4.6 %. Anaerobic digestion of rice straw using 4 g L^-1 of rice straw biochar (RB) showed the highest recorded biogas yield of 503.7 L kg^-1 VS, with 268.6 L kg^-1 VS biomethane yield. However, 4 g L^-1 of calcium-enriched eggshell rice straw biochar (ERB) enhanced the biomethane yield to 281.8 L kg^-1 VS, which represented 95.6 % higher than the control. It was attributed to enhancement of biomethanation, which resulted in 74.5 % maximum recorded biomethane content at the 7th day of anaerobic digestion. Microbial analysis confirmed that Methanosarciniales was the most dominant Archael group in the control (14.84 %), which increased sharply to 73.91 % and 91.66 % after addition of 4 g L^-1 RB and ERB, respectively. The suggested route enhanced the energy recovery in the form of bio-oil and biomethane by 41.6 %.

Wood Biochar Enhances the Valorisation of the Anaerobic Digestion of Chicken Manure

In this study, the efficacy of biochar to mitigate ammonia stress and improve methane production is investigated. Chicken manure (CM) was subjected to high-solid mesophilic anaerobic digestion (15% total solid content) with wood biochar (BC). Wood biochar was further treated using HNO3 and NaOH to produce acid–alkali-treated wood biochar (TBC), with an improvement in its overall ammonium adsorption capacity and porosity. Three treatments were loaded in triplicate into the digesters, without biochar, with biochar and with acid–alkali-treated biochar and maintained at 37 °C for 110 days. The study found a significant improvement in CH4 formation kinetics via enhanced substrate degradation, leading to CH4 production of 74.7 mL g−1 VS and 70.1 mL g−1 VS by BC and TBC treatments, compared to 39.5 mL g−1 VS by control treatments on the 28th day, respectively. However, only the use of TBC was able to prolong methane production during the semi-inhibition phase. The use of TBC also resulted in the highest removal of total ammonia nitrogen (TAN) of 86.3%. In addition, the treatment with TBC preserved the highest microbial biomass at day 110. The presence of TBC also resulted in an increase in electrical conductivity, possibly promoting DIET-mediated methanogenesis. Overall, the acid–alkali treatment of biochar can be a novel approach to improve biochar’s existing characteristics for its utilisation as an additive in anaerobic digestion.

Amine-Modified Biochar for the Efficient Adsorption of Carbon Dioxide in Flue Gas

Biochar-based carbonaceous adsorbents are gaining interest due to their high availability, ease of modification, and low cost; however, they show limited adsorption of CO2 in flue gas due to common textural properties. In this study, TEPA-modified biochar was used to prepare a solid amine adsorbent for the efficient capture of CO2 in flue gas. First, the porous biochar was prepared with FeCl3, Mg(NO3)2, and H2O (g) as activators and walnut shells as carbon sources. Next, the biochar was modified with TEPA to obtain a solid amine adsorbent. Porous texture properties and sample surface functional groups were characterized, and we measured the adsorption CO2 of the amine-modified biochar in a breakthrough adsorption device. Results showed that biochar has a large specific surface area (744.38 m2 g−1), a total pore volume of 1.41 cm3 g−1, and a high mesoporous volume ratio (82.7%). The high pore volume provided a more efficient support space for loading tetraethylenepentamine (TEPA). The adsorbent had an excellent CO2 adsorption capacity, corresponding to 2.82 mmol g−1, which increased to 3.31 mmol g−1 and kept water resistance at 10% H2O (g) simulated flue gas (SFG). The FTIR analysis showed that H2O (g) inhibited urea production after cyclic adsorption. Therefore, solid amine adsorbent created by amine-modified biochar has potential advantages in its application for capturing CO2 in SFG.