Electrochemical degradation of chlortetracycline using N-doped Ti/TiO2 photoanode under sunlight irradiations

Design and Preparation of Heterostructured Cu2O/TiO2 Materials for Photocatalytic Applications

The extensive use of fossil fuels has sped up the global development of the world economy and is accompanied by significant problems, such as energy shortages and environmental pollution. Solar energy, an inexhaustible and clean energy resource, has emerged as a promising sustainable alternative. Light irradiation can be transformed into electrical/chemical energy, which can be used to remove pollutants or transform contaminants into high-value-added chemicals through photocatalytic reactions. Therefore, photocatalysis is a promising strategy to overcome the increasing energy and environmental problems. As is well-known, photocatalysts are key components of photocatalytic systems. Among the widely investigated photocatalysts, titanium dioxide (TiO2) has attracted great attention owing to its excellent light-driven redox capability and photochemical stability. However, its poor solar light response and rapid recombination of electron-hole pairs limit its photocatalytic applications. Therefore, strategies to enhance the photocatalytic activity of TiO2 by narrowing its bandgap and inhibiting the recombination of charges have been widely accepted. Constructing heterojunctions with other components, including cuprous oxide (Cu2O), has especially narrowed the bandgap, providing a promising means of solving the present challenges. This paper reviews the advances in research on heterostructured Cu2O/TiO2 photocatalysts, such as their synthesis methods, mechanisms for the enhancement of photocatalytic performance, and their applications in hydrogen production, CO2 reduction, selective synthesis, and the degradation of pollutants. The mechanism of charge separation and transfer through the Cu2O/TiO2 heterojunctions and the inherent factors that lead to the enhancement of photocatalytic performance are extensively discussed. Additionally, the current challenges in and future perspectives on the use of heterostructured Cu2O/TiO2 photocatalysts are also highlighted.

Efficient, fast and robust degradation of chlortetracycline in wastewater catalyzed by recombinant Arthromyces ramosus peroxidase

Chlortetracycline (CTC), a widely used antibiotic, is recalcitrant and ubiquitous in the environment. Enzymatic degradation of CTC is an economical and efficient bioremediation method. In this work, recombinant Arthromyces ramosus peroxidase (rARP) at a concentration of 3.13 × 10^-9 M was used to catalyze rapid degradation of CTC in water. The second-order rate constants of rARP showed up to 62-fold catalytic efficiency of horseradish peroxidase (HRP) toward CTC. The degradation half-life of CTC at the concentrations of 2 and 40 mg L^-1 in wastewater under the rARP catalysis was, respectively, 5.3 and 5.7 min at 25 °C, and 2.7 and 3.1 min at 40 °C, which were up to 15-fold and 111-fold faster than HRP and laccase, respectively, but use of 3 % the amount of rARP as HRP. rARP catalyzed degradation of CTC at 2-40 mg L^-1 in wastewater completed in 20-24 min, and its catalytic efficiency varied within only 2-fold at 25-40 °C. rARP showed only 2-3-fold discrepancy of catalytic efficiency among pH 5.0, 7.5 and 9.0. CTC under rARP catalysis underwent demethylation and oxidation to form nontoxic N-dedimethyl-9-hydroxy-CTC. The high catalytic efficiency of rARP agreed with a short distance between rARP's δN-His⁵⁶ and CTC's dimethylamine N as indicated by docking simulation. rARP is a useful enzyme for CTC bioremediation.

Feasibility of using different hydrothermal processes for sewage sludge management in China

Due to its tremendous volume and severe environmental concern, sewage sludge (SS) management and treatment are significant in China. The recent prohibition (June 2021) of reusing SS as organic fertilizers makes it urgent to develop alternative processes. However, there is currently little research analyzing the applicability of using HP for sewage SS treatment in China. The significant difference in SS composition and the much less land supply in urban areas might invalidate most previous localized suggestions. In this paper, the development of emerging hydrothermal processes (HPs) for SS treatment will be reviewed, focusing on their decomposition mechanisms and the benefits of HPs compared with current SS treatment technologies. The SS volume, composition, and regulatory regime in China will also be evaluated. Those efforts could address the potential SS treatment capacity shortage and provide an opportunity to recover nutrients, organics and energy embedded in SS. The results show that HPs' high investment cost is mainly limited by the process scale, while their operating costs are comparable to incineration. Minimizing equipment erosion, ensuring process safety, and designing a more efficient heat recovery system are recommended for the future commercialization of HPs in China.

Rapid Degradation of Chlortetracycline Using Hydrodynamic Cavitation with Hydrogen Peroxide

Chlortetracycline (CTC), which has been frequently detected in surface water, is generated primarily by the discharge of high-concentration CTC wastewater from pharmaceutical and livestock plants. The development of effective CTC degradation technology is critical. In this study, the extent of CTC degradation at 80 mg/L was investigated by combining hydrodynamic cavitation (HC) and hydrogen peroxide (H₂O₂). The results indicate degradation ratios of 88.7% and 93.8% at 5 and 30 min, respectively. Furthermore, the possible mechanisms of CTC degradation were determined via HPLC-MS. The CTC degradation pathways include ring openings, C–N bond cleavage, demethylation, dehydroxylation, and desaturation in the sole system of HC, and a series of additional reactions, such as glycine conjugation and the cleavage of C–C double bonds, occurs in the binary system of HC + H₂O₂. Nevertheless, the treated water poses ecological risks and cannot be directly discharged into the environment. Therefore, HC + H₂O₂ treatment may be a rapid and effective primary method for the degradation of high-concentration CTC in pharmaceutical factories.

Europium-Doped Y2O3-Coated Diatomite Nanomaterials: Hydrothermal Synthesis, Characterization, Optical Study with Enhanced Photocatalytic Performance

Eu-doped Y2O3 coated diatomite nanostructures with variable Eu3+ contents were synthesized by a facile hydrothermal technique. The products were characterized by means of energy dispersive X-ray photoelectron spectroscopy (EDX), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Brunauer–Emmett–Teller (BET), UV-vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy techniques. As claimed by PXRD, the particles were crystallized excellently and attributed to the cubic phase of Y2O3. The influence of substitution of Eu3+ ions into Y2O3 lattice caused a redshift in the absorbance and a decrease in the bandgap of as-prepared coated compounds. The pore volume and BET specific surface area of Eu-doped Y2O3-coated diatomite is greater than uncoated biosilica. The sonophotocata-lytic activities of as-synthesized specimens were evaluated for the degradation of Reactive Blue 19. The effect of various specifications such as ultrasonic power, catalyst amount, and primary dye concentration was explored.

Titanium Dioxide-Based Photocatalysts for Degradation of Emerging Contaminants including Pharmaceutical Pollutants

Contamination of the environment has been a growing problem in recent years. Due to the rapid growth in human population, the expansion of cities, along with the development of industry, more and more dangerous chemicals end up in the environment, especially in soil and water. For the most part, it is not possible to effectively remove chemicals through traditional remediation techniques, because those used in treatment plants are not specifically designed for this purpose. Therefore, new approaches for water remediation are in great demand. Many efforts have been focused on applications of photocatalysis for the remediation of chemical pollutants including drugs. Titanium(IV) oxide nanoparticles have particularly been considered as potential photocatalysts due to their favorable properties. In this article, we present the problem of emerging contaminants including drugs and discuss the use of photocatalysts based on titanium(IV) oxide nanoparticles for their degradation. A wide selection of materials, starting from bare TiO2, via its hybrid and composite materials, are discussed including those based on carbonaceous materials or connections with macrocyclic structures. Examples of photodegradation experiments on TiO2-based materials including those performed with various active pharmaceutical ingredients are also included.

Adsorption of Reactive Black 5 Dye from Aqueous Solutions by Carbon Nanotubes and its Electrochemical Regeneration Process

: Removal of Reactive Black 5 (RB5) dye from aqueous solutions was investigated by adsorption onto Multi-walled Carbon Nanotubes (MWCNTs) and Single-walled Carbon Nanotubes (SWCNTs). A Taguchi orthogonal design including pH, initial RB5 concentration, contact time, and CNTs dose, was used in 16 experiments. The results showed that all four factors were statistically significant, and the optimum conditions for both adsorbents were as follows: pH of 3, adsorbent dose of 1000 mg/L, RB5 concentrations of 25 mg/L, and contact time of 60 min. An equilibrium study by Isotherm Fitting Tool (ISOFIT) software showed that Langmuir isotherm provided the best fit for RB5 adsorption by CNTs. The maximum predicted adsorption capacities for the dye were obtained as 231.84 and 829.20 mg/g by MWCNTs and SWCNTs, respectively. The results also indicated that the adsorption capacity of SWCNTs was about 1.21 folds higher than that of MWCNTs. Studies of electrochemical regeneration were conducted, and the results demonstrated that RB5-loaded MWCNTs and SWCNTs could be regenerated (86.5% and 77.3%, respectively) using the electrochemical process. Adsorbent regeneration was mostly due to the degradation of the dye by the attack of active species such as chlorate, H2O2, and, •OH, which were generated by the electrochemical oxidation process with Ti/RuO2-IrO2-TiO2 anodes. The results of Gas Chromatography-Mass Spectrometry (GC-MS) analysis showed that acetic acid, 3-chlorobenzenesulfonamide, and 1,2-benzenedicarboxylic acid were produced after adsorbent regeneration by the electrochemical process in the solution of regeneration. The adsorption and regeneration cycles showed that the electrochemical process with Ti/RuO2-IrO2-TiO2 and graphite is a good alternative method for the regeneration of CNTs and simultaneous degradation of the dye.

Semiconductor Electrode Materials Applied in Photoelectrocatalytic Wastewater Treatment—an Overview

Industrial sources of environmental pollution generate huge amounts of industrial wastewater containing various recalcitrant organic and inorganic pollutants that are hazardous to the environment. On the other hand, industrial wastewater can be regarded as a prospective source of fresh water, energy, and valuable raw materials. Conventional sewage treatment systems are often not efficient enough for the complete degradation of pollutants and they are characterized by high energy consumption. Moreover, the chemical energy that is stored in the wastewater is wasted. A solution to these problems is an application of photoelectrocatalytic treatment methods, especially when they are coupled with energy generation. The paper presents a general overview of the semiconductor materials applied as photoelectrodes in the treatment of various pollutants. The fundamentals of photoelectrocatalytic reactions and the mechanism of pollutants treatment as well as parameters affecting the treatment process are presented. Examples of different semiconductor photoelectrodes that are applied in treatment processes are described in order to present the strengths and weaknesses of the photoelectrocatalytic treatment of industrial wastewater. This overview is an addition to the existing knowledge with a particular focus on the main experimental conditions employed in the photoelectrocatalytic degradation of various pollutants with the application of semiconductor photoelectrodes.

Synthesis of a Novel Catalyst MnO/CNTs for Microwave-Induced Degradation of Tetracycline

Microwave-induced catalytic degradation (MICD) has been considered as one of the most prospective approaches to remove organic contaminants from water. High-performance catalysts, ideally offering efficient degradation ability, are essential to this process. This work reports the fabrication of manganese oxide on carbon nanotubes (MnO/CNTs) as an efficient catalyst under microwave irradiation (MI) to remove tetracycline (TC) from aqueous solution. The hybrid MnO/CNTs structure shows excellent performance in TC degradation. Combining experimental characterization and theoretical calculations, synergistic mechanisms are revealed: (i) Strong MnO/CNTs interaction stabilizes Mn(II) through interfacial bonding; (ii) high-spin states associated with low coordinated Mn(II) play a major role in MICD; and (iii) superoxide radicals (•O2−) and hydroxyl radicals (•OH) induced by microwave input are identified as the major active species.

Acid-treated Fe-doped TiO2 as a high performance photocatalyst used for degradation of phenol under visible light irradiation

The photocatalytic activity of Fe-doped TiO₂ nanoparticles is significantly increased by an acid-treatment process. The photocatalyst nanoparticles were prepared using sol-gel method with 0.5 mol% ratio of Fe:Ti in acidic pH of 3. The nanoparticles were structurally characterized by means of X-ray diffraction (XRD), high-resolution transmission electron microscope (HRTEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and diffuse reflectance spectroscopy (DRS). It was observed that the photocatalytic activity suffered from an iron oxide contaminating layer deposited on the surface of the nanoparticles. This contamination layer was removed using an HCl acid-treatment process. The photocatalytic activity using 500 mg/L of Fe_0.5-TiO₂ in a 10 mg/L of phenol solution increased significantly from 33% to 57% (about 73% increase in the performance), within 90 min of reaction time under visible light irradiation. This significant improvement was achieved by removing the iron oxide contamination layer from the surface of the nanoparticles and adjusting pH to mild acidic and basic pHs.

Preparation, Characterization, and Application of N,S-codoped TiO2/Montmorillonite Nanocomposite for the Photocatalytic Degradation of Ciprofl oxacin: Optimization by Response Surface Methodology

An N,S-codoped TiO2/Montmorillonite nanocomposite, as a photocatalyst, was synthesized in the sol-gel method and used for the degradation of ciprofloxacin (Cip) in an aqueous solution. N,S-codoped TiO2/Montmorillonte was characterized by powder X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy (DRS), field emission scanning electron microscopy (FESEM), transmission electron microscope (TEM), and X-ray fluorescence (XRF) analyzes. A central composite design (CCD) was used to optimize the variables for the removal of Cip by the N,S-codoped TiO2/Montmorillonite. A maximum decomposition of 92% of Cip was achieved in optimum conditions. The band gap value for the nanocomposite was 2.77 eV. Moreover, with the use of nanocomposite in the four consecutive runs, the final removal efficiency was 66%. The results show that the N,S-codoped TiO2/ Montmorillonite under simulated sunlight irradiation can be applied as an effective photocatalyst for the removal of Cip from aqueous solutions.

Anchoring Fe3O4 Nanoparticles on Carbon Nanotubes for Microwave-Induced Catalytic Degradation of Antibiotics

Microwave-induced catalytic degradation is considered amongst the most efficient techniques to remove antibiotic such as chlortetracycline from contaminated water. Described here is a new microwave-induced oxidation catalyst based on carbon nanotubes (CNTs) decorated uniformly with nanoparticles of Fe₃O₄. The combination of dielectric loss and magnetic loss of the material contributed to its stronger microwave absorption and the ability to produce more "hot spots". These hot spots promoted the oxidation of common antibiotics such as chlortetracycline, tetracycline, and oxytetracycline under microwave irradiation. Experiments with the addition of scavenger showed that hydroxy radicals (^•OH) together with superoxide radicals (^•O₂^-) contributed to the antibiotics removal as well. The final degradation products included CO₂ and NO₃^- as confirmed by mass spectroscopy and ion chromatography analyses. The results indicated that the Fe₃O₄/CNTs was an efficient catalyst for microwave-induced oxidation.

Activation of persulfate by homogeneous and heterogeneous iron catalyst to degrade chlortetracycline in aqueous solution

This study investigates the removal of chlortetracycline (CTC) antibiotic using sulfate radical-based oxidation process. Sodium persulfate (PS) was used as a source to generate sulfate radicals by homogeneous (Fe²⁺) and heterogeneous (zero valent iron, ZVI) iron as a catalyst. Increased EDTA concentration was used to break the CTC-Fe metal complexes during CTC estimation. The influence of various parameters, such as PS concentration, iron (Fe²⁺ and ZVI) concentration, PS/iron molar ratio, and pH were studied and optimum conditions were reported. CTC removal was increased with increasing concentration of PS and iron at an equal molar ratio of PS/Fe²⁺ and PS/ZVI processes. PS/Fe²⁺ and PS/ZVI oxidation processes at 1:2 (500 μM PS and 1000 μM) molar ratio showed 76% and 94% of 1 μM CTC removal in 2 h. Further increased molar ratio 1:2 onwards, PS/Fe²⁺ process showed a slight increase in CTC degradation whereas in PS/ZVI process showed similar degradation to 1:2 (PS/Fe) ratio at constant PS 500 μM concentration. Slower activation of persulfate which indirectly indicates the slower generation of sulfate radicals in PS/ZVI process showed higher degradation efficiency of CTC. The detected transformation products and their estrogenicity results stated that sulfate radicals seem to be efficient in forming stable and non-toxic end products.

Magnetically separable sulfur-doped SnFe2O4/graphene nanohybrids for effective photocatalytic purification of wastewater under visible light

In this report, magnetically recoverable sulfur-doped SnFe₂O₄/graphene (S-SFO/GR) nanohybrids have been successfully developed via a facile solvothermal method. The characterizations on the structural, morphology, and optical properties of the nanohybrids indicate that S-SFO particles are successfully embedded on the GR nanosheets. The photocatalytic activity has been evaluated by photocatalytic degradation of chlorotetracycline under visible light irradiation. Among the composites with various mass ratios, the quasi-first-order rate constant of the nanohybrids formed with 9wt% S in SFO and 15wt% GR (9S-SFO/GR-15) can reach as high as 1.83min^-1, which is much higher than that of SFO (0.68min^-1) and SFO/GR (0.91min^-1), confirming the important role of S and GR for the photocatalytic process. The combination of the three components of S, SFO, and GR has enhanced the visible light absorption capability and inhibited the recombination of photogenerated electron-hole. The 9S-SFO/GR-15 nanohybrids can be recovered easily by a magnet and reused for five times with remained photocatalytic efficiency about 70%. A possible catalytic mechanism explaining the efficient photocatalytic performances of the prepared nanohybrids has been proposed.

All-printed planar photoelectrochemical cells with digitated cathodes for the oxidation of diluted aqueous pollutants

A novel outline of a planar photoelectrochemical cell consisting of a semiconductor layer topped by subsequent layers of a digitated insulator and counter electrode is introduced. The use of vertically separated electrodes represents a major development in reducing the footprint (inactive areas) of planar electrochemical cells. The cells, consisting of a nanoparticular titania photoanode and a digitated, metallic cathode, were fabricated by a strictly additive process employing material printing as the exclusive deposition and patterning tool. Transparent conductive oxide-coated glass and polyethyleneterepthalate sheets were used as substrates; nanocrystalline titania dispersion bonded by a novel organosilica binder was used for the fabrication of the photoanode and gold or carbon inks for the fabrication of the digitated cathodes. Due to the digitated shaping of the cathode, photoelectrochemical response was not suffering from iR drop down to low electrolyte ionic strengths. The printed cells were used for electroassisted photocatalytic degradation experiments with aqueous solutions of coumarin. Considerable acceleration of the coumarin degradation rate compared to the plain photocatalytic mode was observed.

Enhanced simultaneous PEC eradication of bacteria and antibiotics by facilely fabricated high-activity {001} facets TiO2 mounted onto TiO2 nanotubular photoanode

Biohazards and coexisted antibiotics are two groups of emerging contaminants presented in various aquatic environments. They can pose serious threat to the ecosystem and human health. As a result, inactivation of biohazards, degradation of antibiotics, and simultaneous removal of them are highly desired. In this work, a novel photoanode with a hierarchical structured {001} facets exposed nano-size single crystals (NSC) TiO2 top layer and a perpendicularly aligned TiO2 nanotube array (NTA) bottom layer (NSC/NTA) was successfully fabricated. The morphology and facets of anatase TiO2 nanoparticles covered on the top of NTA layer could be controlled by adjusting precalcination temperature and heating rate as the pure NTA was clamped with glasses. Appropriate recalcination can timely remove surface F from {001} facets, and the photocatalytic activity of the resultant photoanode was subsequently activated. NSC/NTA photoanode fabricated under 500 °C precalcination with 20 °C min(-1) followed by 550 °C recalcination possessed highest photoelectrocatalytic efficiency to simultaneously remove bacteria and antibiotics. Results suggest that two-step calcination is necessary for fabrication of high photocatalytic activity NSC/NTA photoanode. The capability of simultaneous eradication of bacteria and antibiotics shows great potential for development of a versatile approach to effectively purify various wastewaters contaminated with complex pollutants.

One-pot solvothermal synthesis of magnetic SnFe2O4 nanoparticles and their performance in the photocatalytic degradation of chlortetracycline with visible light radiation

Highly crystalline SnFe₂O₄ nanoparticles with high saturation magnetization and superior chlortetracycline degradation efficiency was developed using a one-pot solvothermal method.