3D biofilm visualization and quantification on granular bioanodes with magnetic resonance imaging

Current advances of chlorinated organics degradation by bioelectrochemical systems: a review

Chlorinated organic compounds (COCs) are typical refractory organic compounds, having high biological toxicity. These compounds are a type of pervasive pollutants that can be present in polluted soil, air, and various types of waterways, such as groundwater, rivers, and lakes, posing a significant threat to the ecological environment and human health. Bioelectrochemical systems (BESs) are an effective strategy for the degradation of bio-refractory compounds. BESs improve the waste treatment efficiency through the application of weak electrical stimulation. This review discusses the processes of BESs configurations and degradation performances in different environmental media including wastewater, soil, waste gas and groundwater. In addition, the degradation mechanisms and performance-enhancing additives are summarized. The future challenges and perspectives on the development of BES for COCs removal are briefly discussed.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Opportunities for visual techniques to determine characteristics and limitations of electro-active biofilms

Optimization of bio-electrochemical systems (BESs) relies on a better understanding of electro-active biofilms (EABfs). These microbial communities are studied with a range of techniques, including electrochemical, visual and chemical techniques. Even though each of these techniques provides very valuable and wide-ranging information about EABfs, such as performance, morphology and biofilm composition, they are often destructive. Therefore, the information obtained from EABfs development and characterization studies are limited to a single characterization of EABfs and often limited to one time point that determines the end of the experiment. Despite being scarcer and not as commonly reported as destructive techniques, non-destructive visual techniques can be used to supplement EABfs characterization by adding in-situ information of EABfs functioning and its development throughout time. This opens the door to EABfs monitoring studies that can complement the information obtained with destructive techniques. In this review, we provide an overview of visual techniques and discuss the opportunities for combination with the established electrochemical techniques to study EABfs. By providing an overview of suitable visual techniques and discussing practical examples of combination of visual with electrochemical methods, this review aims at serving as a source of inspiration for future studies in the field of BESs.

In vivo characterization of electroactive biofilms inside porous electrodes with MR Imaging

Identifying the limiting processes of electroactive biofilms is key to improve the performance of bioelectrochemical systems (BES). For modelling and developing BES, spatial information of transport phenomena and biofilm distribution are required and can be determined by Magnetic Resonance Imaging (MRI) in vivo, in situ and in operando even inside opaque porous electrodes. A custom bioelectrochemical cell was designed that allows MRI measurements with a spatial resolution of 50 μm inside a 500 μm thick porous carbon electrode. The MRI data showed that only a fraction of the electrode pore space is colonized by the Shewanella oneidensis MR-1 biofilm. The maximum biofilm density was observed inside the porous electrode close to the electrode-medium interface. Inside the biofilm, mass transport by diffusion is lowered down to 45% compared to the bulk growth medium. The presented data and the methods can be used for detailed models of bioelectrochemical systems and for the design of improved electrode structures.

The use of magnetic resonance imaging can contribute to a better understanding of limiting processes occurring in electroactive biofilms especially inside opaque porous electrodes.

Microstructure and granulation cycle mechanisms of anammox-HAP coupled granule in the anammox EGSB reactor

The formation of anammox-hydroxyapatite (HAP) coupled granules has been shown to be an approach to efficient nitrogen removal and phosphorus recovery in the anammox EGSB reactor. However, the granulation cycle mechanism of anammox-HAP coupled granules for sustainable regeneration and growth is still not well understood. In this study, the microstructure, chemical composition and microbial structure of a total of six different-sized granules, from 0.25 mm to 2.8 mm, was determined. An SEM-EDS analysis indicated that the small granules (<0.5 mm) were composed of poly-pellet clusters with anammox biofilms attached to the HAP cores, and the large granules (>0.5 mm) consisted of a three-layer structure: a surface anammox biofilm layer, a middle connection layer, and a HAP mineral inner core. The analysis of elemental composition and microbial structure suggested homogenous granular characteristics regardless of granule size. The dominant microorganisms were anammox bacteria of Candidatus Kuenenia stuttgartiensis and heterotrophic denitrifying bacteria. Based on these results, a granulation cycle mechanism for anammox-HAP coupled granules was proposed for the first time. The growth of the small granules with the simultaneous enlargement of anammox biofilms and HAP cores results in the formation of large granules. Large granules regenerate new small granules in a two-step procedure. The first step is the separation of embryo HAP crystals from the mother core via heterogeneous growth, and the second step is the separation of the biofilms due to biodegradation and shear stress.

Contribution of bacterial extracellular polymeric substances (EPS) in surface water purification

Naturally present aquatic microorganisms play an important role in water purification systems, such as the self-purification of surface waters. In this study, two water sources representing polluted surface water (Olympic Green; OG) and unpolluted surface water (Jingmi river; JM), were used to explore the self-purification of surface water by bacteria under different environmental conditions. The dominant bacterial community of OG and JM waters (both are Firmicutes and Proteobacteria) were isolated, cultured, and then used to carry out flocculation tests. Results showed that the flocculation ability of the dominant bacteria and extracellular polymeric substances (EPS) obtained from OG isolation was significantly greater than that from JM. Further examination illustrated that the main components of EPS were polysaccharides, which played an important role in improving the flocculation ability of bacteria. EPS from dominant cultural bacteria strains (OG1 and JM3) isolated from the two different sources lacked hydrophilic groups (e.g. COOH) and had a networked structure which are the main reasons to enhance the flocculation ability. The bacterial diversity and redundancy analysis (RDA) results also showed that microbial community composition is determined by water quality (SS, TOC, and NH₄⁺), and different Bacteroidetes, Actinobacteria and Proteobacteria community structures can improve the water body's ability to remove environmental pollutants (such as SS, humic acid and fulvic acid). These findings provide new information showing how bacterial communities change with environmental factors while maintaining the purity of surface water.

Biological fixed-film systems

The technical papers published in 2019 regarding wastewater treatment and microbial films were classified into two categories: biofilm and biofilm reactors. The biofilm category includes biofilm formation, biofilm consortia, bacterial signals, biofouling, extracellular polymeric substances, and biofilm membrane bioreactors. The biofilm reactors category provides recent information on rotating biological contactors, fluidized-bed biofilm reactors, integrated fixed-film activated sludge, moving-bed biofilm reactors, packed-bed biofilm reactors, sequencing biofilm batch reactors, and trickling filters.

Pathogens electrogenicity as a tool for in-situ metabolic activity monitoring and drug assessment in biofilms

Concerns regarding increased antibiotic resistance arising from the emergent properties of biofilms have spurred interest in the discovery of novel antibiotic agents and techniques to directly estimate metabolic activity in biofilms. Although a number of methods have been developed to quantify biofilm formation, real-time quantitative assessment of metabolic activity in label-free biofilms remains a challenge. Production of electrical current via extracellular electron transport (EET) has recently been found in pathogens and appears to correlate with their metabolic activity. Accordingly, monitoring the production of electrical currents as an indicator of cellular metabolic activity in biofilms represents a new direction for research aiming to assess and screen the effects of antimicrobials on biofilm activity. In this article, we reviewed EET-capable pathogens and the methods to monitor biofilm activity to discuss advantages of using the capability of pathogens to produce electrical currents and effective combination of these methods. Moreover, we discussed EET mechanisms by pathogenic and environmental bacteria and open questions for the physiological roles of EET in pathogen's biofilm. The present limitations and possible future directions of in situ biofilm metabolic activity assessment for large-scale screening of antimicrobials are also discussed.

Mo2 C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂ C/reduced graphene oxide (Mo₂ C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂ C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂ C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m^-2 , which was considerably higher than that of CP-MFC (926.8±6.3 mW m^-2 ). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria-electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).