Effect of salt and metal accumulation on performance of membrane distillation system and microbial community succession in membrane biofilms

Beyond feast and famine: Cultivating hydrodynamic oxygenic photogranules with better performances under permanent feast regime

Oxygenic photogranules (OPGs) are currently obtained in permanent famine or cyclic feast-famine regimes. Whether photogranulation occurs under a permanent feast regime and how these regimes impact OPGs are unknown. Herein, the three regimes, each applied in two replicate hydrodynamic reactors, were established by different feeding frequencies. Results showed that OPGs were successfully cultivated in all regimes after 24-36 days of photogranulation phases with similar microbial community functions, including filamentous gliding, extracellular polymeric substances production, and carbon/nitrogen metabolism. The OPGs were then operated under the same sequencing batch mode and all achieved efficient removal of chemical oxygen demand (>91 %), ammonium (>96 %), and total nitrogen (>76 %) after different adaptation periods (19-41 days). Notably, the permanent feast regime obtained OPGs with the best physicochemical properties, the shortest adaptation period, and the lowest effluent turbidity, thus representing a novel means of hydrodynamic cultivating OPGs with better performances for sustainable wastewater treatment.

Advanced oxidation process/coagulation coupled with membrane distillation (AOP/Coag-MD) for efficient ammonia recovery: Elucidating biofouling control performance and mechanism

The inadequate understanding of the biofouling formation mechanism and the absence of effective control have inhibited the commercial application of membrane distillation (MD). In this study, an advanced oxidation process (AOP)/coagulation-coupled (Coag) membrane distillation system was proposed and exhibited the potential for MD ammonia recovery (recovery rate: 94.1%). Extracellular polymeric substances (EPS) and soluble microbial products (SMP) components such as humic acid and tryptophan-like proteins were disrupted and degraded in the digestate. The curtailment and sterilizing efficiency of AOP on biofilm growth was also verified by optical coherence tomography (OCT) in situ real-time monitoring and confocal laser scanning microscopy (CLSM). Peroxymonosulfate (PMS) was activated to generate sulfate (SO4•-) and hydroxyl radicals (HO•), which altered the microbial community. After oxidative treatment, 16 S rRNA sequencing indicated that the dominant phylum of the microbial community evolved into Firmicutes. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis demonstrated that free radicals produced by PMS could disrupt cells' signaling molecules and interactions. In conjunction with these analyses, the mechanisms of response to free radical attack by Gram-negative bacteria, Gram-positive bacteria, and fungi were revealed. This research provided new insights into the field of membrane fouling control for membrane technology resource recovery processes, broadening the impact of AOP applications on microbiological response and fate in the environment.

Functionalization of seawater reverse osmosis membrane with quorum sensing inhibitor to regulate microbial community and mitigate membrane biofouling

Membrane biofouling is a challenge to be solved for the stable operation of the seawater reverse osmosis (SWRO) membrane. This study explored the regulation mechanism of quorum sensing (QS) inhibition on microbial community composition and population-level behaviors in seawater desalination membrane biofouling. A novel antibiofouling SWRO membrane (MA_m) by incorporating one of quorum sensing inhibitors (QSIs), methyl anthranilate (MA) was prepared. It exhibited enhanced anti-biofouling performance than the exogenous addition of QSIs, showing long-term stability and alleviating 22 % decrease in membrane flux compared with the virgin membrane. The results observed that dominant bacteria Epsilon- and Gamma-proteobacteria (Shewanella, Olleya, Colwellia, and Arcobacter), which are significantly related to (P ≤ 0.01) the metabolic products (i.e., polysaccharides, proteins and eDNA), are reduced by over 80 % on the MA_m membrane. Additionally, the introduction of MA has a more significant impact on the QS signal-sensing pathway through binding to the active site of the transmembrane sensor receptor. It effectively reduces the abundance of genes encoding QS and extracellular polymeric substance (EPS) (exopolysaccharides (i.e., galE and nagB) and amino acids (i.e., ilvE, metH, phhA, and serB)) by up to 50 % and 30 %, respectively, resulting in a reduction of EPS by more than 50 %, thereby limiting the biofilm formation on the QSI-modified membrane. This study provides novel insights into the potential of QSIs to control consortial biofilm formation in practical SWRO applications.

A comprehensive evaluation of the temporal and spatial fouling characteristics of RO membranes in a full-scale seawater desalination plant

The fouling of seawater reverse osmosis (SWRO) membranes remains a persistent challenge in desalination. Previous research has focused mainly on fouling separately; however, organic, inorganic, and biofouling can coexist and influence each other. Hence, in-depth study of the spatiotemporal changes in actual combined fouling in full-scale seawater desalination will provide more effective information for fouling investigation and control. In this study, we monitored (i) the operational performance of a full-scale desalination plant for 7 years and (ii) the development and characterization of membrane and spacer fouling at different locations of spiral-wound membrane modules sampled after 2.5-, 3.5-, and 7-year operation. The findings showed that (i) operational performance indicators declined with time (normalized flux 40 % reduction, salt rejection 2 % in 7 years), with a limited effect of the 20-day cleaning frequency, (ii) fouling accumulation in the membrane module mainly occurred at the feed side of the lead module and the microbial community in these area exhibited the highest diversity, (iii) the dominant microbial OTUs belonged mainly to Proteobacteria (43-70 %), followed by Bacteroidetes (10-11 %), (iv) Phylogenetic molecular ecological networks and Spearman correlation analysis revealed that Chloroflexi (Anaerolineae) and Planctomycetes were keystone species in maintaining the community structure and biofilm maturation and significantly impacted the foulant content on the SWRO membrane, even with low abundance, and that (v) fouling accumulation was composed of polysaccharides, soluble microbial products, marine humic acid-like substances, and inorganic Ca/Fe/Mg/Si dominate the fouling layer of both the membrane and spacer. Overall, variation partitioning analysis quantitatively describes the increasing contribution of biofouling over time. Ultimately, the organic‒inorganic-biofouling interaction (70 %) significantly contributed to the overall fouling of the membrane after 7 years of operation. These results can be used to develop more targeted fouling control strategies to optimize SWRO desalination plant design and operation.

Exaggerated interaction of biofilm-developed microplastics and contaminants in aquatic environments

Biofilm-developed microplastics (MPs) may serve as important vectors for contaminants in aquatic environments. Elucidating the interactions between biofilm-developed MPs and coexisting contaminants is crucial for understanding the vector capacities of MPs. However, little is known about how the adverse effects of contaminants on MP surface-colonized biofilms influence their vector capacity. In this study, we aimed to investigate the interaction mechanism of biofilms colonizing the surface of MPs with coexisting contaminants using microcosm experiments and biofilm characterization techniques. The results indicated that the biofilm biomass on polystyrene increased over time, providing an additional abundance of oxygen-containing functional groups and promoting Cd accumulation by biofilm-developed polystyrene. Moreover, as a coexisting contaminant, Cd exerted adverse effects such as additional mortality of microorganisms and senescence and MP-colonized biofilm shedding. Consequently, the contaminant vector capacity of biofilm-developed MPs could be mitigated. Thus, the adverse effects of coexisting contaminants on biofilms influenced the ability of MPs to act as vectors in aquatic environments. Neglecting the negative effects of contaminants on biofilms may lead to an overestimation of the contaminant vector capacity of biofilm-developed MPs. This study provides support for more accurate assessment of the interactions between biofilm-developed MPs as vectors and contaminants in aquatic environments.

Thermal Effect on Algae, Biofilm and Their Composition Towards Membrane Distillation Unit: A Mini-review

Membrane distillation (MD) has lower operating temperature and potential to recycle waste heat for desalination which catches much attention of the researchers in the recent years. However, the biofouling is still a challenging hurdle to be overcome for such applications. The microbial growth rate, secretion and biofilm formation are sensitive to heat. Membrane distillation is a thermally driven separation, so the increase of temperature in the seawater feed could influence the extent of biofouling on the unit parts. In this review, we present the effect of temperature on algal growth, the range of temperature the microbes, marine algae and planktons able to survive and the changes to those planktons once exceed the critical temperature. Thermal effect on the biofilm, its composition and properties are discussed as well, with association of the biofilm secreting microbes, but the study related to membrane distillation unit seems to be lacking and MD biofouling factors are not fully understood. Characterization of the algae, biofilm and EPS that govern biofouling are discussed. This information not only will help in designing future studies to fill up the knowledge gaps in biofouling of membrane distillation, but also to some extent, assist in pointing out possible fouling factors and predicting the degree of biofouling in the membrane distillation unit.

Understanding the membrane fouling control process at molecular level in the heated persulfate activation- membrane distillation hybrid system

Sulfate radical (SO₄^●-) based advanced oxidation is considered as a promising pretreatment strategy to degrade organic pollutants and thereby mitigate the membrane fouling in the membrane process. In this study, heat-activated persulfate (PS) activation was integrated with the membrane distillation (MD) process for the alleviation of membrane fouling in treatment of wastewater treatment plant (WWTP) secondary effluent and surface water. In-depth understanding of the molecular fate during membrane fouling control process was performed by using a non-targeted screening method of two-dimensional gas chromatography-time-of-flight mass spectrometry (GC × GC-TOF-MS) coupling with multiple characterizations. It was found that the heat-activated PS activation pretreatment could effectively degrade the dissolved organic matter (DOM) and change its molecular conformation, wherein the relative abundance of oxygen-containing substances was remarkably increased through oxygenation reactions. Moreover, the refractory organics with higher molecular weight (MW) and unsaturation degree were more inclined to be destroyed, following by partial mineralization during pretreatment process. It was also identified that oxygen-deficient compounds and the molecular formulas featuring higher double bond equivalent (DBE) values and lower MW tended to be deposited on the membrane surface to cause the membrane fouling. In particular, the aliphatic substances were the predominant components irrespective of membrane foulant samples from secondary effluent or surface water. Meanwhile, the complexation between organic compounds and high valence cations as well as the precipitation of inorganics were restrained owing to the reduction of DOM concentration and the transformation of molecular structure, consequently leading to reduced membrane fouling. This study is believed to further provide new insight into the membrane fouling control mechanism at molecular level.

Biofouling control of membrane distillation for seawater desalination: Effect of air-backwash and chemical cleaning on biofouling formation

This study explored the applicability of chemical cleaning and air-backwash to alleviate biofouling on seawater membrane distillation (SWMD). Membrane performance and wettability properties maintained at optimum duration and frequency of the treatments, as indicated by low permeate conductivity throughout the tests. The cleaning of the membrane using 2% NaOH by immersing the membrane for 30 min after 240 min operation removed the biofouling layer, indicated by low permeate conductivity of 370 µScm^-1 after cleaning. However, more frequent membrane cleaning led to membrane damage, more severe wetting, and membrane hydrophobicity reduction. Ten-second air-backwash after 240 min of operation was also effective in controlling the biofouling, particularly when conducted at air pressure of 1 bar. More frequent air-backwash resulted in more aggravated inorganic fouling and accelerated biofouling formation due to the recurring introduction of air, leading to rapid membrane wetting.

Effects of biofilm on metal adsorption behavior and microbial community of microplastics

In this study, the adsorption behavior of Cu(II) and Pb(II) on the biofilm-developed polystyrene (PS) microplastics (MPs) was compared with the virgin PS (V-PS) and UV-aged PS (UV-PS). The results demonstrated that the biofilm could enhance the adsorption abilities onto MPs more than UV radiation. The intra-particle diffusion model suggested that the adsorption on V-PS was dominated by intra-particle diffusion, while the adsorption rate was controlled by the binding diffusion on UV-PS and biofilm-developed PS (Bio-PS). Compared with the V-PS and UV-PS, the Bio-PS showed the largest adsorption capacity based on the Freundlich isotherm model, which indicated that the adsorption of heavy metals onto Bio-PS was multilayer and heterogeneous. The adsorption mechanism of Bio-PS contained physical adsorption, chemisorption, and biosorption. These Bio-PS adsorption types participated in both oxygen and nitrogen groups. Based on the 16S rRNA analysis, the diversity of the microbial community with biofilm changed to a certain extent after the adsorption of heavy metals. Furthermore, the stress of lead (Pb) adsorption had a higher impact on the microbial community distribution and the PS biofilm. This study illustrated how the formation of biofilms can highly affect the adsorption behavior of MPs as well as the microbial community of MPs.

A Critical Review of Membrane Wettability in Membrane Distillation from the Perspective of Interfacial Interactions

Hydrophobic membranes used in membrane distillation (MD) systems are often subject to wetting during long-term operation. Thus, it is of great importance to fully understand factors that influence the wettability of hydrophobic membranes and their impact on the overall separation efficiency that can be achieved in MD systems. This Critical Review summarizes both fundamental and applied aspects of membrane wetting with particular emphasis on interfacial interaction between the membrane and solutes in the feed solution. First, the theoretical background of surface wetting, including the relationship between wettability and interfacial interaction, definition and measurement of contact angle, surface tension, surface free energy, adhesion force, and liquid entry pressure, is described. Second, the nature of wettability, membrane wetting mechanisms, influence of membrane properties, feed characteristics and operating conditions on membrane wetting, and evolution of membrane wetting are reviewed in the context of an MD process. Third, specific membrane features that increase resistance to wetting (e.g., superhydrophobic, omniphobic, and Janus membranes) are discussed briefly followed by the comparison of various cleaning approaches to restore membrane hydrophobicity. Finally, challenges with the prevention of membrane wetting are summarized, and future work is proposed to improve the use of MD technology in a variety of applications.