Autotrophic sulfide removal by mixed culture purple phototrophic bacteria

Comparative study of the removal of sulfate by UASB in light and dark environment

At present, the application of sewage treatment technologies is restricted by high sulfate concentrations. In the present work, the sulfate removal was biologically treated using an upflow anaerobic sludge blanket (UASB) in the absence/presence of light. First, the start-up of UASB for the sulfate removal was studied in terms of COD degradation, sulfate removal, and effluent pH. Second, the impacts of different operation parameters (i.e., COD/SO42- ratio, temperature and illumination time) on the UASB performance were explored. Third, the properties of sludge derived from the UASB at different time were analyzed. Results show that after 28 days of start-up, the COD removal efficiencies in both the photoreactor and non-photoreactor could reach a range of 85-90% while such reactors could achieve > 90% of sulfate being removed. Besides, higher illumination time could facilitate the removal of pollutants in the photoreactor. To sum up, the present study can provide technical support for the clean removal of sulfate from wastewater using photoreactors.

Establishing an efficient membrane bioreactor for simultaneous pollutant removal and purple bacteria production under salinity stress

Recovering resources from wastewater to alleviate the energy crisis has become the prevailing trend of technological development. Purple phototrophic bacteria (PPB), a group of fast-growing microbes, have been widely noticed for their potential in producing value-added products from waste streams. However, saline contents in these waste streams, such as food processing wastewater pose a big challenge, which not only restrain the pollutant removal efficiency, but also hinder the growth of functional microbes. To overcome this, a photo anaerobic membrane bioreactor cultivating PPB (PPB-MBR) was constructed and its performance upon long-term salinity stress was investigated. PPB-MBR achieved desirable pollutants removal performance with the average COD and NH4+ removal efficiency being 87% (±8%, n = 87) and 89% (±10%, n = 87), respectively during long-term exposure to salinity stress of 1-80 g NaCl L-1. PPB were predominant during the entire operation period of 87 days (60%-80%), obtaining maximum biomass yield of 0.67 g biomass g-1 CODremoved and protein productivity of 0.18 g L-1 d-1 at the salinity level of 20 g NaCl L-1 and 60 g NaCl L-1, respectively. The sum of value-added products in proportion to the biomass reached 58% at maximum at the salinity level of 60 g NaCl L-1 with protein, pigments and trehalose contributing to 44%, 8.7%, and 5%, respectively. Based on economic analysis, the most cost-saving scenario treating food processing wastewater was revealed at salinity level of around 20 g NaCl L-1. However, more optimization tools are needed to boost the production efficiency so that the profit from value-added products can outweigh the additional cost by excess salinity in the future implication.

Photoautotrophic removal of hydrogen sulfide from biogas using purple and green sulfur bacteria

Biogas desulfurization based on anoxygenic photosynthetic processes represents an alternative to physicochemical technologies, decreasing the risk of O₂ and N₂ contamination. This work aimed at assessing the potential of Allochromatium vinosum and Chlorobium limicola for biogas desulfurization under different light intensities (10 and 25 klx) and H₂S concentrations (1 %, 1.5 % and 2 %) in batch photobioreactors. In addition, the influence of rising biogas flow rates (2.9, 5.8 and 11.5 L d^-1 in stage I, II and III, respectively) on the desulfurization performance in a 2.3 L photobioreactor utilizing C. limicola under continuous mode was assessed. The light intensity of 25 klx negatively influenced the growth of A. vinosum and C. limicola, resulting in decreased H₂S removal capacity. An increase in H₂S concentrations resulted in higher volumetric H₂S removal rates in C. limicola (2.9-5.3 mg L^-1 d^-1) tests compared to A. vinosum (2.4-4.6 mg L^-1 d^-1) tests. The continuous photobioreactor completely removed H₂S from biogas in stage I and II. The highest flow rate in stage III induced a deterioration in the desulfurization activity of C. limicola. Overall, the high H₂S tolerance of A. vinosum and C. limicola supports their use in H₂S desulfurization from biogas.

Expanding mechanistic models to represent purple phototrophic bacteria enriched cultures growing outdoors

The economic feasibility of purple phototrophic bacteria (PPB) for resource recovery relies on using enriched-mixed cultures and sunlight. This work presents an extended Photo-Anaerobic Model (ePAnM), considering: (i) the diverse metabolic capabilities of PPB, (ii) microbial clades interacting with PPB, and (iii) varying environmental conditions. Key kinetic and stoichiometric parameters were either determined experimentally (with dedicated tests), calculated, or gathered from literature. The model was calibrated and validated using different datasets from an outdoors demonstration-scale reactor, as well as results from aerobic and anaerobic batch tests. The ePAnM was able to predict the concentrations of key compounds/components (e.g., COD, volatile fatty acids, and nutrients), as well as microbial communities (with anaerobic systems dominated by fermenters and PPB). The results underlined the importance of considering other microbial clades and varying environmental conditions. The model predicted a minimum hydraulic retention time of 0.5 d^-1. A maximum width of 10 cm in flat plate reactors should not be exceeded. Simulations showed the potential of a combined day-anaerobic/night-aerobic operational strategy to allow efficient continuous operation.

Roles, mechanism of action, and potential applications of sulfur-oxidizing bacteria for environmental bioremediation

Sulfur (S) is a crucial component in the environment and living organisms. This work is the first attempt to provide an overview and critical discussion on the roles, mechanisms, and environmental applications of sulfur-oxidizing bacteria (SOB). The findings reveal that key enzymes of SOB embarked on oxidation of sulfide, sulfite, thiosulfate, and elemental S. Conversion of reduced S compounds was oxidatively catalyzed by various enzymes (e.g. sulfide: quinone oxidoreductase, flavocytochrome c-sulfide dehydrogenase, dissimilatory sulfite reductase, heterodisulfide reductase-like proteins). Environmental applications of SOB discussed include detoxifying hydrogen sulfide, soil bioremediation, and wastewater treatment. SOB producing S⁰ engaged in biological S soil amendments (e.g. saline-alkali soil remediation, the oxidation of sulfide-bearing minerals). Biotreatment of H₂S using SOB occurred under both aerobic and anaerobic conditions. Sulfide, nitrate, and sulfamethoxazole were removed through SOB suspension cultures and S⁰-based carriers. Finally, this work presented future perspectives on SOB development, including S⁰ recovery, SOB enrichment, field measurement and identification of sulfur compounds, and the development of mathematical simulation.

Sulfide removal characteristics, pathways and potential application of a novel chemolithotrophic sulfide-oxidizing strain, Marinobacter sp. SDSWS8

Sulfide generally exists in wastewater, black and odor river, as well as aquaculture water, and give rise to adverse effect on ecological stability and biological safety, due to the toxicity, corrosivity and malodor of sulfide. In the present study, a chemolithotrophic sulfide-oxidizing bacteria (SOB) was isolated and identified as Marinobacter maroccanus strain SDSWS8. And it produced no hemolysin and was susceptible to most antibiotics. There were no accumulation of sulfide, sulfate and thiosulfate during the sulfide removal process. The optimum conditions of sulfide removal were temperature 15-40 °C, initial pH value 4.5-9.5, salinity 10-40‰, C/N ratio 0-20 and sulfide concentration 25-150 mg/L. The key genes of sulfide oxidation, Sox system (soxB, soxX, soxA, soxZ, soxY, soxD, soxC), dissimilatory sulfur oxidation (dsrA, aprA and sat) and sqr, were successfully amplified and expressed, indicating the three pathways coordinated to complete the sulfide oxidation. Besides, strain SDSWS8 had inhibitory effect on four pathogen Vibrio (V. harveyi, V. parahaemolyticus, V. anguillarum and V. splendidus). Furthermore, efficient removal of sulfide from real aquaculture water and sludge mixture could be accomplished by strain SDSWS8. This study may provide a promising candidate strain for sulfide-rich water treatment.

Microbial behaviours inside alternating anaerobic-anoxic environment of a sulfur cycle-driven EBPR system: A metagenomic investigation

Denitrifying sulfur conversion-assisted enhanced biological phosphorus removal (DS-EBPR) was recently developed for saline wastewater treatment. However, the main functional bacteria and the interrelationship of functional bacteria of the DS-EBPR have not been defined and identified so far. This study used metagenomics and multivariate statistics to deduce the functional microbial community and distribution of functional genes associated with the critical metabolic pathways of carbon (C), nitrogen (N), phosphorus (P) and sulfur (S), particularly regarding how they would behave under the alternating anaerobic-anoxic conditions inside a long-term DS-EBPR system. An analysis of the metagenomics and metabolic functions identified 11 major microbial species which were classifiable into four groups: sulfate reducing bacteria (SRB, 0.8-2.2%), sulfur oxidizing bacteria (SOB, 31.9-37.7%), denitrifying phosphate accumulating organisms (DPAOs, 10.0-15.8%) and glycogen accumulating organisms (GAOs, 3.7-7.7%). The four groups of microorganisms performed their respective metabolisms synergistically. In terms of distribution of functional genes, SRB (Desulfococcus and Desulfobacter) and SOB (Chromatiaceae and Thiobacillus) are not only encoded by the related sulfur conversion genes (sqr, dsrAB, aprAB and sat), but also encoded by the necessary ppx and ppk1 gene for P removal that they can be considered as the potential S-related PAOs. Between the anaerobic and anoxic conditions, the metagenome-based microbial community remained structurally similar, but the functional genes, which encode various key enzymes for the P, N, and S pathways, changed in abundance. This study contributes to our understanding on the interactions and competition between the SRB, SOB, DPAOs, and GAOs in a DS-EBPR system.

Up-scale challenges on biopolymer production from waste streams by Purple Phototrophic Bacteria mixed cultures: A critical review

The increasing volume of waste streams require new biological technologies that can address pollution concerns while offering sustainable products. Purple phototrophic bacteria (PPB) are very versatile organisms that present a unique metabolism that allows them to adapt to a variety of environments, including the most complex waste streams. Their successful adaptation to such demanding conditions is partly the result of internal polymers accumulation which can be stored for electron/energy balance or as carbon and nutrients reserves for deprivation periods. Polyhydroxyalkanoates, glycogen, sulphur and polyphosphate are examples of polymers produced by PPB that can be economically explored due to their applications in the plastic, energy and fertilizers sectors. Their large-scale production implies the outdoor operation of PPB systems which brings new challenges, identified in this review. An overview of the current PPB polymer producing technologies and prospects for their future development is also provided.