WITHDRAWN: Membrane Aerated Biofilm Reactors for mainstream partial nitritation / anammox: Experiences using real municipal wastewater

Transition of fouling characteristics after development of membrane wetting in membrane-aerated biofilm reactors (MABRs)

The practical applications of water treatment techniques based on hydrophobic aeration membrane are limited due to membrane pores blocking. Various studies have revealed that both biofilm and microbial secretion can exacerbate membrane fouling. Recently, we constructed a membrane-aerated biofilm reactor (MABR) system for treating micro-polluted surface water in order to identify the primary cause for oxygen transfer rate (OTR) decline. It was found that microbial secretion had a more prominent negative effect than that caused by biofilm, as manifested by the fact the effect of microbial secretion (66.49%) was greater than the resistance of biofilm (38.83%). Fouling decreased the total pore volume of all membrane. The peak location of adsorption capacity was more likely to occur at smaller pore sizes with longer running time. Notably, continuous fluorescence distribution between the separating layer and pores like finger in MABR system exhibited an increasing trend with the operation time, indicating a gradual increase of microbial viability. Core protein structure was revealed by different bond peaks (0-90 d). Specifically, for different organic components of EPS, the hydrophilic HIS was the main content, while the mass transfer resistance caused by the gel increased, which reduced the contact angle and increased the bubble point pressure. Therefore, effects of EPS content and composition should be considered during the application of water treatment techniques based on MABR.

One-stage partial nitrification and anammox process in a sequencing batch biofilm reactor: Start-up, nitrogen removal performance and bacterial community dynamics in response to temperature

A one-stage partial nitrification and anammox (PN/A) process was started up and operated under varying temperatures in a lab-scale sequencing batch biofilm reactor. The start‑up phase took 110 days with an intermittent aeration strategy, and the removal efficiencies of ammonia‑nitrogen and total nitrogen were found to be 92.22% and 76.07%, respectively. The total nitrogen removal efficiency (NRE) increased by 9.49% when temperature decreased from 30 °C to 25 °C, but declined by 83.84% from 25 °C to 20 °C. The PN process was inhibited and subsequently limited the nitrogen removal performance at 20 °C. When temperature returned to 28 °C, the NRE recovered to 67.27%, but it was still lower than the value before the decrease in temperature (79.40%). Microbial community analysis showed that the predominant ammonia oxidation bacteria and anammox bacteria were Nitrosomonas and Candidatus Kuenenia, respectively. Nitrosomonas grew, while the relative abundance of Candidatus Kuenenia increased as temperature decreased and vice versa.