Enhancing stability of aerobic granules by microbial selection pressure using height-adjustable influent strategy

Key function of Kouleothrix in stable formation of filamentous aerobic granular sludge at low superficial gas velocity with polymeric substrates

Forming and maintaining stable aerobic granular sludge (AGS) at a low superficial gas velocity (SGV) is challenging, particularly with polymeric substrates. This study cultivated filamentous aerobic granular sludge (FAGS) with filamentous Kouleothrix (Type 1851) at low SGV (0.15 cm/s) utilizing mixed acetate-soluble starch. Within approximately 260 days, notable increases in the relative abundance of Kouleothrix (from 4 % to 10 %) and Ca. Competibacter (from 1 % to 26 %) were observed through 16S rRNA gene analysis. Metagenomic analysis revealed increased expression of functional genes involved in volatile fatty acid (VFA) production (e.g., ackA and pta) and polyhydroxyalkanoate synthesis (e.g., phbB and phbC). Kouleothrix acted as a skeleton for bacterial attachment and was the key fermenting bacteria promoting granulation and maintaining granule stability. This study provides insight into the formation of FAGS with low-energy and non-VFA substrates.

Negative role of filamentous bulking and its elimination in anammox process

In this study, the filamentous bulking (FB) with moderate and excessive levels were demonstrated to induce anammox failure by inhibiting nitrogen (N) removal and biomass retention. The low external mass transfer resulted from high liquid-surface friction and low turbulence of filamentous surface was considered the "trigger" of anammox failure, which decreased flux of nitrogen flow toward granular surface and directly limited N-removal loading, which meanwhile exposed granules with N-scarcity environment and indirectly inhibited N-removal bio-activity. Low bio-activity performed poor extracellular polymeric substances secretion further destroyed bio-aggregation with low suface hydrophobicity, which acted as "accelerator" for granule disintegration and biomass washout, ultimatly leading to anammox failure. Fortunately, incresing hydraulic shear stress could eradicate FB's negative effects without inhibiting FB itself, which promoted re-granulation and N-remval restore by enhancing external mass transfer more than hydraulic detachment. Enhancing mechanical stirring with FB level was necessary to maintain stable operation of granular anammox system.

In-depth insight into improvement of simultaneous nitrification and denitrification/biofouling control by increasing sludge concentration in membrane reactor: performance, microbial assembly and metagenomic analysis

Currently, severe membrane fouling and inefficient nitrogen removal were two main issues that hindered the sustainable operation and further application of membrane bioreactor (MBR). This study aimed to simultaneously alleviate membrane fouling and improve nitrogen removal by applying high sludge concentration in MBR. Results showed that high sludge concentration (12000 mg/L) enhanced total nitrogen removal efficiency (78 %) and reduced transmembrane pressure development rate. Microbial community analysis revealed that high sludge concentration enriched functional bacteria associated with nitrogen removal, increased filamentous bacteria fraction in bio-cake and inhibited Thiothrix overgrowth in bulk sludge. From molecular level, the key genes involved in nitrogen metabolism, electron donor/adenosine triphosphate production and amino acid degradation were up-regulated under high sludge concentration. Overall, high sludge concentration improved microbial assembly and functional gene abundance, which not only enhanced nitrogen removal but also alleviated membrane fouling. This study provided an effective strategy for sustainable operation of MBR.

Biofilm metagenomic characteristics behind high coulombic efficiency for propanethiol deodorization in two-phase partitioning microbial fuel cell

Hydrophobic volatile organic sulfur compounds (VOSCs) are frequently found during sewage treatment, and their effective management is crucial for reducing malodorous complaints. Microbial fuel cells (MFC) are effective for both VOSCs abatement and energy recovery. However, the performance of MFC on VOSCs remains limited by the mass transfer efficiency of MFC in aqueous media. Inspired by two-phase partitioning biotechnology, silicone oil was introduced for the first time into MFC as a non-aqueous phase (NAP) medium to construct two-phase partitioning microbial fuel cell (TPPMFC) and augment the mass transfer of target VOSCs of propanethiol (PT) in the liquid phase. The PT removal efficiency within 32 h increased by 11-20% compared with that of single-phase MFC, and the coulombic efficiency of TPPMFC (11.01%) was 4.32-2.68 times that of single-phase MFC owing to the fact that highly active desulfurization and thiol-degrading bacteria (e.g., Pseudomonas, Achromobacter) were attached to the silicone oil surface, whereas sulfur-oxidizing bacteria (e.g., Thiobacillus, Commonas, Ottowia) were dominant on the anodic biofilm. The outer membrane cytochrome-c content and NADH dehydrogenase activity improved by 4.15 and 3.36 times in the TPPMFC, respectively. The results of metagenomics by KEGG and COG confirmed that the metabolism of PT in TPPMFC was comprehensive, and that the addition of a NAP upregulates the expression of genes related to sulfur metabolism, energy generation, and amino acid synthesis. This finding indicates that the NAP assisted bioelectrochemical systems would be promising to solve mass-transfer restrictions in low solubility contaminates removal.

Potential role of quorum quenching activity of silver nanoparticles in controlling non-filamentous bulking within activated sludge process

The effective prevention and control of non-filamentous bulking is a significant challenge. In this study, the underlying effect of quorum sensing (QS) on inducing non-filamentous bulking and the maintenance effect of silver nanoparticles (AgNPs) on sludge floc stability, aggregation and settleability based on the quorum quenching (QQ) activity during non-filamentous bulking were investigated. The results showed that the concentration of N-acyl homoserine lactone (AHL) increased significantly in the activated sludge system at a high organic load rate (OLR), triggering the AHL-mediated QS. Additionally, the triggered QS promoted exopolysaccharide secretion, reducing the surface charge and hydrophobicity of the sludge aggregates, and further deteriorating the settleability of the sludge aggregates. AgNPs, a quorum sensing inhibitor (QSI), inhibited the AHL-QS based on QQ activity under high OLR, which maintained the physicochemical properties of extracellular polymeric substances (EPS). AgNPs-QQ maintained the surface energy barrier and electrostatic barrier of sludge aggregates and the gel properties of exopolysaccharides, which is favorable for microbial aggregation. The appropriate concentrations of AgNPs (≤10 mg/L) had no negative effect on biological nutrient removal in the sequencing batch reactors (SBRs) at the high organic loading. Therefore, AgNPs effectively prevent and control non-filamentous bulking by their QQ activity in the activated sludge process. Thus, the present study provided new insights into controlling non-filamentous bulking during the activated sludge process.

Effect of flow regime on mass transfer diffusion and stability of aerobic granular sludge (AGS) in view of interfacial thermodynamic

Aerobic granular sludge (AGS) technology has been widely studied as "The Next Generation Wastewater Treatment technology". The effect of hydraulic conditions on the structural stability of AGS has been widely studied. However, the function of flow regime on the AGS stability, especially dissolved oxygen (DO) mass transfer, is still unknown. In this study, we used the Reynolds number (Re) to quantify the flow regime and selected different stages of AGS as experimental subjects. Results showed that the relatively suitable Re (Re = 150) could create lower DO mass transfer limitation (Lc = 27.4 μm) and increase protein (PN) contents and the abundance of hydrophobic functional groups in AGS. At this condition (Re = 150), the interfacial Gibbs free energy of sludge-water (ΔG_LS^a) was at a lower state (-129.75 ± 2.15 mJ·m^-2), which favored the stability of AGS. Principal component analysis (PCA) and correlation analysis indicated that the response of ΔG_LS^a was affected by Lc, PN, and hydrophobic groups. In addition, results obtained for unstable AGS further verified that suitable Re regulates the structural stability of AGS. This study deepens the understanding of Re as an important hydraulic parameter for structural stability of AGS, which is also of great significance for energy saving of sequential batch reactors (SBRs) with agitation in practical engineering.

Granular indigenous microalgal-bacterial consortium for wastewater treatment: Establishment strategy, functional microorganism, nutrient removal, and influencing factor

Granular indigenous microalgal-bacterial consortium (G-IMBC) system integrates the advantages of the MBC and granular activated sludge technologies, also with superior microalgal wastewater adaptation capacity. In this review, the concept of IMBC was firstly described, followed by its establishment and acclimation strategies. Characteristics and advantages of G-IMBC system compared to other IMBC systems (i.e., attached and floc IMBC systems) were then introduced. Moreover, the involved functional microorganisms and their interactions, as well as nutrient removal mechanisms were systematically and critically reviewed. Finally, the influencing factors including wastewater characteristics and operation factors were discussed. This study aims to provide a comprehensive up-to-date summary of the G-IMBC system for sustainable wastewater treatment.

Uncover the secret of the stability and interfacial Gibbs free energy of aerobic granular sludge

Interfacial Gibbs free energy (IGFE) as a thermodynamic indicator characterize the stability of the natural system. For aerobic granular sludge (AGS), how IGFE determines the stability of sludge remains to be determined. The Gibbs free energy change at the AGS-water interface (ΔG_sw^a) and AGS interfaces (ΔG_s^c) were selected as the main interfacial thermodynamic factors. Results indicated that the stable AGS was guaranteed with ΔG_s^c at the range of -31 to - 46 J m^-2. Pearson correlation coefficients between ΔG_sw^a/ ΔG_s^c and relative hydrophobicity, water content, SVI₃₀, integrity coefficient were -0.9, 0.8, 0.85, and 0.84, which illustrated that the IGFE could be a more comprehensive thermodynamic indicator. Microbial community and EPS analysis verified the importance of denitrifiers, Amide III, protein-like substances for AGS stability. This work offers a new insight into the development of AGS stability based on IGFE.