Electrified ceramic membrane actuates non-radical mediated peroxymonosulfate activation for highly efficient water decontamination

How to enhance persulfate processes by external-field effects: From fundamentals to applications

Persulfate-based advanced oxidation processes (PS-AOPs) are considered as efficient techniques for the degradation of contaminants, whereas the effective activation methods for reactive oxygen species (ROS) generation play vital roles in PS-AOPs. However, the internal electric field mediated activation methods, like introducing chemicals and materials, are often restricted by their intrinsic properties. Conversely, the introduction of external fields can provide extra energy to remarkably enhance the PS activation performance from outside, acting as an additional impetus to promote the cleavage of OO bond and thus improve the generation efficiency of ROS. In this review, a comprehensive overview of the external field enhanced PS-AOPs from fundamentals to applications was introduced. Specifically, the activation mechanisms under different external fields, recent advances and their influencing factors, as well as potential practical applications of the external field enhanced PS-AOPs were summarized. The perspectives from the opportunity to challenge were thus made for future investigation. Therefore, this review is expected to give a systematic overview of external-field enhanced PS-AOPs, providing a new direction towards the improvement on catalytic efficiency of PS-AOPs through the rational utilization of external fields.

Unveiling electron transfer and radical transformation pathways in coupled electrocatalysis and persulfate oxidation reactions for complex pollutant removal

The degradation of multiple organic pollutants in wastewater via advanced oxidation processes might involve different radicals, of which the types and concentrations vary upon interacting with different pollutants. In this study, electrochemical activation of peroxymonosulfate (E/PMS) using advanced activated carbon cloth (ACC) as electrode was applied for simultaneous degradation of mixed pollutants, e.g., metronidazole (MNZ) and p-chloroaniline (PCA). 92.5 % of MNZ and 91.4 % of PCA can be degraded at the cathode and anode at a low current density and PMS concentration, respectively. The rate constants for the simultaneous removal of MNZ and PCA in the E/PMS/MNZ(PCA) system were 118 times and 6 times higher than those in the sole PMS system, and 2.5 times and 1.6 times higher than those in the E/Na2SO4/MNZ(PCA) system, respectively. Different electrochemical characteristics, EPR spectra and radical quenching tests verified that the degradation of MNZ and PCA in the optimal system proceeded primarily through non-radical-dominated oxidation, involving electron transfer and 1O2 effect. The system also exhibited low energy consumption (0.215 kWh/m-3·order-1), broad operational pH range, excellent removal efficiency for water matrix, and low by-products toxicity, indicating its strong potential for practical applications. The ACC, with its super stable, low cost, and electrochemical activity, make it as a promising materials applicable in the E/PMS system for degradation of multiple pollutants. The study further elucidated the mechanism of pollutant interaction with electrode materials in terms of radical and non-radical transformation, providing fundamental insight into the application of this system for treatment of complex wastewater.

Electrochemically Assisted Cobalt/MXene Membrane for Effective Water Treatment: Synchronously Improving Catalytic Performance and Anti-Interference Ability

Catalytic membrane technology for water treatment is often constrained by a trade-off between permeability and catalytic efficiency as well as interference from coexisting anions and organic matter in natural water matrices. Herein, a novel cobalt-loaded MXene (Co/MXene) 2D membrane with good hydrophilicity, electrical conductivity, and PMS activation function is constructed. The negative voltage is exerted on the membrane to significantly enhance its PMS activation efficiency and anti-interference capacity toward effective water treatment. Under -2 V, the optimal Co/MXene catalytic membrane displays 100% rhodamine b (RhB) removal within a residence time of only 1.1 s, whose RhB degradation kinetic constant (k of 6.85 s-1) is 17.6 times higher than that of the Co/MXene catalytic membrane alone and is also greatly superior to other advanced catalysts and catalytic membranes. Meanwhile, the catalytic membrane displays obvious anti-interference ability in the presence of various coexisting substances of the water matrix and performs well in treating the secondary effluent of coking wastewater. The radical-dominated (SO4•- and •OH) mechanism accompanied by the nonradical species (1O2 and Co(VI)═O) is revealed in the system, and the reactive species production is obviously enhanced under negative voltage. Experimental results and theoretical calculations jointly confirm the key role of electrochemical assistance in enhancing membrane performance, which not only facilitates cycling of Co3+/Co2+ for enhanced PMS activation via improving PMS adsorption and promoting charge transfer from Co to PMS but also hinders interference from coexisting substances in water via electrostatic repulsion.

"Catch-and-feed": Janus catalytic flow-through membrane enables highly efficient removal of micropollutants in water

Micropollutants, due to their low concentrations, exceptional chemical stability, and profound toxicity, present a significant challenge in water treatment. While electrocatalysis and photocatalysis have shown promise as potential water purification techniques, their inherent limitations in mass transfer often result in elevated energy requirements and suboptimal efficiency. In this study, a Janus catalytic flow-through membrane (JCFM) was utilized to successfully remove two notorious micropollutants dichlorvos (DDVP) and azoxystrobin (AZX) from water based on the "catch-and-feed" strategy. This membrane adopts a ``sandwich'' configuration, comprising platinum-modified reduced titanium (Pt@rTO) as the electrocatalytic layer, porous titanium (Ti) as the current collector, and rTO as the photocatalytic layer. The JCFM exhibited remarkable performance, maintaining an •OH energy conversion efficiency of up to 20.12 nM and displaying catalytic activity (kJCFM = 6.97 × 10-4 s-1) in degrading AZX far superior to that of photocatalysis (kPC = 9.51 × 10-5 s-1) or electrocatalysis (kEC = 9.89 × 10-5 s-1) alone. It is evidenced that the Pt@rTO layer efficiently generates reactive oxygen species (ROS), which, along with the micropollutants, flow through the JCFM ("feed"), which strengthens mass transfer and facilitates efficient reactions within the confined space ("catch"). The ROSs then seep through the rTO layer, where they are reactivated by UV light radiation. The mechanism and the alternative reaction pathway of DDVP and AZX has also been proposed. In sequential testing, the JCFM achieved continuous and energy-efficient removal of micropollutants, exceeding 97.5 % over 200 h. The scale-up application of this technology has proven effective in the treatment of secondary biochemical effluent from municipal sewage, coking wastewater, and landfill leachate, achieving the concurrent degradation of various micropollutants.

A Nanoconfined FeCo2O4-Embedded Ceramic Membrane Regulates Electron Transfer in Peroxymonosulfate Activation to Selectively Generate Singlet Oxygen for Water Decontamination

Peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs), as a promising technology for water decontamination, are constrained by low reaction kinetics due to limited reaction selectivity and mass transfer. Herein, we designed a nanoconfined FeCo2O4-embedded ceramic membrane (FeCo2O4-CM) under flow-through pattern for PMS activation. Confining PMS and FeCo2O4 within nanochannels (3.0-4.7 nm) enhanced adsorption interactions (-7.84 eV vs -2.20 eV), thus boosting mass transfer. Nanoconfinement effect regulated electron transfer pathways from PMS to FeCo2O4-CM by modulating the active site transformation to ≡Co(III) in nanoconfined FeCo2O4-CM, enabling selectively generating 1O2. The primary role of 1O2 in the nanoconfined system was confirmed by kinetic solvent isotope experiments and indicative anthracene endoperoxide (DPAO2). The system enabled 100% removal of atrazine (ATZ) within a hydraulic retention time of 2.124 ms, demonstrating a rate constant over 5 orders of magnitude higher than the nonconfined system (3.50 × 103 s-1 vs 0.42 min-1). It also exhibited strong resilience to pH variations (3.3-9.0) and coexisting substances, demonstrating excellent stability indicated by consistent 100% ATZ removal for 14 days. This study sheds light on regulating electron transfer pathways to selectively generate 1O2 through the nanoconfinement effect, boosting the practical application of PMS-based AOPs in environmental remediation and potentially applying them to various other AOPs.

Hollow Nanoreactors Unlock New Possibilities for Persulfate-Based Advanced Oxidation Processes

As a novel type of catalytic material, hollow nanoreactors are expected to bring new development opportunities in the field of persulfate-based advanced oxidation processes due to their peculiar void-confinement, spatial compartmentation, and size-sieving effects. For such materials, however, further clarification on basic concepts and construction strategies, as well as a discussion of the inherent correlation between structure and catalytic activity are still required. In this context, this review aims to provide a state-of-the-art overview of hollow nanoreactors for activating persulfate. Initially, hollow nanoreactors are classified according to the constituent components of the shell structure and their dimensionality. Subsequently, the different construction strategies of hollow nanoreactors are described in detail, while common synthesis methods for these construction strategies are outlined. Furthermore, the most representative advantages of hollow nanoreactors are summarized, and their intrinsic connections to the nanoreactor structure are elucidated. Finally, the challenges and future prospects of hollow nanoreactors are presented.

Synergistic degradation of 2,4-dichlorophenoxyacetic acid in water by interfacial pre-reduction enhanced peroxymonosulfate activation derived from novel zero-valent iron/biochar

Iron-based biochar exhibits great potential in degrading emerging pollutants and remediation of water environments. In this study, a highly efficient catalytic Fe0/biochar (MZB-800) was synthesized by the co-pyrolysis of poplar sawdust and K2FeO4 at 800 °C. A novel water purification technology of pre-reduction followed by PMS activation for MZB-800 was proposed to degrade the refractory 2,4-dichlorophenoxyacetic acid (2,4-D) pesticide. The corrosive effect of the strong oxidizing potassium salt endowed the MZB-800 surface with more Fe0 and porous structure, achieving greater 2,4-D adsorption binding energy. The removal efficiency of MZB-800 on 2,4-D was greater than that of biochar (BC) and conventional Fe0/biochar (Fe-BC) prepared by FeCl3·6 H2O as the precursor. The proposed novel water purification technology showed the synergistic effect between the interfacial pre-reduction and the PMS activation derived by MZB-800. Regarding 2,4-D degradation and dechlorination performance, the synergistic coefficient between pre-reduction and subsequent PMS activation for MZB-800 were 2 and 1.4 respectively. Based on the normalized kinetic analysis and the Langmuir-Hinshelwood model, we proposed the underlying mechanism of MZB-800 interfacial pre-reduction and subsequent PMS activation for synergistic removal of 2,4-D. The large amount of Fe2+ and hydroxyl density accumulated by the Fe0 and hydroquinone structures on the MZB-800 surface during the pre-reduction stage provided abundant active sites for the subsequent activation of PMS. The improved activation reaction rate generated more reactive oxygen species, further strengthening the removal efficiency of 2,4-D. This work manifested that the novel water purification technology of pre-reduction/PMS activation of iron-based biochar is feasible for removing emerging pollutants in the water environment. ENVIRONMENTAL IMPLICATION: Extensive abuse of 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide with high solubility and refractory degradation has caused environmental pollution and ecological deterioration. This manuscript described a novel water purification technology, centered on high-efficiency Fe0/biochar and utilizing pre-reduction and PMS reactivation strategies to synergistically degrade 2,4-D, which had strong environmental relevance. By elucidating the synergistic removal mechanism, the research provided valuable insights into removing emerging pollutants, thus promoting environmental sustainability and safeguarding ecosystem health. Overall, it is of high importance to provide a feasible and efficient method for removing hazardous 2,4-D from water environments, which contributes to addressing pressing environmental problems.

Sequential anodic oxidation and cathodic electro-Fenton in the Janus electrified membrane for reagent-free degradation of pollutants

Electrified membrane technologies have recently demonstrated high potential in tackling water pollution, yet their practical applications are challenged by relying on large precursor doses. Here, we developed a Janus porous membrane (JPEM) with synergic direct oxidation by Magnéli phase Ti4O7 anode and electro-Fenton reactions by CuFe2O4 cathode. Organic pollutants were first directly oxidized on the Ti4O7 anode, where the extracted electrons from pollutants were transported to the cathode for electro-Fenton production of hydroxyl radical (·OH). The cathodic ·OH further enhanced the mineralization of organic pollutant degradation intermediates. With the sequential anodic and cathodic oxidation processes, the reagent-free JPEM showed competitive performance in rapid degradation (removal rate of 0.417 mg L-1 s-1) and mineralization (68.7 % decrease in TOC) of sulfamethoxazole. The JPEM system displayed general performance to remove phenol, carbamazepine, and perfluorooctanoic acid. The JPEM runs solely on electricity and oxygen that is comparable to that of PEM relies on large precursor doses and, therefore, operation friendly and environmental sustainability. The high pollutant removal and mineralization achieved by rational design of the reaction processes sheds light on a new approach for constructing an efficient electrified membrane.

Carbon-based electrocatalytic dual-membrane system bolsters singlet oxygen production for ultrafast water decontamination

Reactive electrochemical membranes (REMs) are promising technologies in treating pharmaceuticals and personal care products (PPCPs) in water. Herein, a novel carbon-based electrocatalytic dual-membrane system was designed to exploit the whole redox process of electrodes, in which the membrane cathode and anode were formed by carbon fibers doped with Fe and metal organic frameworks derived SnO2, respectively. Propranolol (PRO) was used as a representative of PPCPs. The system bolstered singlet oxygen (1O2) production by the synergy of two REM electrodes, further improving the removal rate constant of PRO compared with single-electrode-dominant modes. 97.5 ± 1.7% of PRO removal was achieved in a single-pass electro-filtration at a residence time of ∼2.9 s. The generation of 1O2 and its reaction with pollutants were systematically and thoroughly explored via experiments coupled with theoretical calculation. The toxicity of the decomposition products was predicted to be reduced compared with PRO. These findings suggested that the carbon-based electrocatalytic dual-membrane system could effectively promote 1O2 production for ultrafast catalytic oxidation of PRO, providing a cost-effective solution for the development of an efficient and stable technology for PPCPs removal.

Coupling anodic and cathodic reactions using an electrocatalytic dual-membrane system actuates ultra-efficient degradation with regulable mechanisms

The versatile reaction possibilities arising from the interaction between the anodic and cathodic reactions naturally contained in electrocatalytic membrane filtration (EMF) systems are of great valuable in meeting the current complex water treatment requirements. But currently, most studies only focus on half-cell reactions with a single electrocatalytic membrane, which limits the research progress of the EMF technology. Here we report a coupling strategy that utilizes the interaction between the anodic and cathodic reactions to actuate ultra-efficient degradation performance with regulable reaction mechanisms. An electrocatalytic dual-membrane filtration (EDMF) system was established. Six typical configurations of the EDMF system were set up and systematically investigated by adjusting the electrode distance and filtration sequence. Based on the obtained results of degradation performance and mechanisms, a regulation strategy which enabled flexible tuning of direct nonradical oxidation (e.g., h⁺) and indirect oxidation (e.g., ¹O₂, ·OH, HO₂·, O₂·^-, etc.) was proposed. In particular, cathodic reactions were found to adversely affect the anodic reactions at the relatively short electrode distance of 0.9 mm. Anodic reactions could inhibit the generation of ¹O₂ at short distance of 0.9 mm but promote its generation at long distances of 9 and 17 mm. The A-C_0.9 configuration achieved the highest degradation performance, while the C-A_9 configuration was revealed to be much more conducive to ¹O₂ production. Overall, our findings demonstrate the versatility and tunability of the reaction mechanism and performance of the EDMF system due to the flexible coupling of the anodic and cathodic reactions, which potentially lays a foundation for future development of ultra-efficient mechanism-adjustable electrocatalysis technologies.

Subtle tuning of nanodefects actuates highly efficient electrocatalytic oxidation

Achieving controllable fine-tuning of defects in catalysts at the atomic level has become a zealous pursuit in catalysis-related fields. However, the generation of defects is quite random, and their flexible manipulation lacks theoretical basis. Herein, we present a facile and highly controllable thermal tuning strategy that enables fine control of nanodefects via subtle manipulation of atomic/lattice arrangements in electrocatalysts. Such thermal tuning endows common carbon materials with record high efficiency in electrocatalytic degradation of pollutants. Systematic characterization and calculations demonstrate that an optimal thermal tuning can bring about enhanced electrocatalytic efficiency by manipulating the N-centered annulation-volatilization reactions and C-based sp³/sp² configuration alteration. Benefiting from this tuning strategy, the optimized electrocatalytic anodic membrane successfully achieves >99% pollutant (propranolol) degradation during a flow-through (~2.5 s for contact time), high-flux (424.5 L m^-2 h^-1), and long-term (>720 min) electrocatalytic filtration test at a very low energy consumption (0.029 ± 0.010 kWh m^-3 order^-1). Our findings highlight a controllable preparation approach of catalysts while also elucidating the molecular level mechanisms involved.

Electro-enhanced activation of peroxymonosulfate by a novel perovskite-Ti4O7 composite anode with ultra-high efficiency and low energy consumption: The generation and dominant role of singlet oxygen

Traditional free radicals-dominated electrochemical advanced oxidation processes (EAOPs) and sulfate radical-based advanced oxidation processes (SR-AOPs) are limited by pH dependence and weak reusability, respectively. To overcome these shortcomings, electro-enhanced activation of peroxymonosulfate (PMS) on a novel perovskite-Ti₄O₇ composite anode (E-PTi-PMS system) was proposed. It achieved an ultra-efficient removal rate (k = 0.467 min^-1) of carbamazepine (CBZ), approximately 36 and 8 times of the E-PTi and PTi-PMS systems. Singlet oxygen (¹O₂) played a dominant role in the E-PTi-PMS system and transformed from SO₄^•-, O₂^•-, ^•OH and oxygen vacancy (V_o^••). The electric field expedited the decomposition and utilization of PMS, promoting the generation of radicals and expanding the formation pathway of ¹O₂. The E-PTi-PMS system presented superiorities over wide pH (3-10) and less dosage of PMS (1 mM), expanding the pH adaptability and reducing the cost of EAOPs. Simultaneously, the excellent reusability (30 cycles) solved the bottleneck of recycling catalysts in SR-AOPs via an ultra-low energy (0.025 kWh/m³-log). This work provides a promising alternative towards high-efficiency and low-cost treatment of polluted waters.