Metal-organic frameworks for high performance desalination through thickness control and structural fine-tuning

Multifunctional Roles of Dihydrotetrazine-Decorated Zr-MOFs in Photoluminescence and Colorimetrism for Discrimination of Arsenate and Phosphate Ions in Water

The high chemical and structural stabilities of zirconium (Zr)-based metal-organic frameworks (MOFs) in aquatic media make them ideal candidates for wastewater treatment. Rational decoration or Zr-MOFs with functional groups can significantly extend their application in this area. In this work, two well-known Zr-MOFs, UiO-66 and MIL-140-A, were functionalized with dihydrotetrazine function to increase their capability in water treatment. Investigations reveal that these two dihydrotetrazine (DHTZ)-functionalized MOFs, namely UiO-66(Zr)-DHTZ and MIL-140(Zr)-DHTZ, can be applied as a two-component array for highly selective and sensitive discrimination of arsenate (AsO43-) and phosphate (PO43-) ions in water in the presence of other anions. Photoluminescence (PL) tests using UiO-66(Zr)-DHTZ show that this MOF can detect these two anions via a ratiometric response, 1.74 for arsenate and 1.84 for phosphate at 2 μM, with superior detection limits (7.2 × 10-8 M for AsO43- and 4.3 × 10-8 M for PO43-). The ratiometric PL response of UiO-66(Zr)-DHTZ toward arsenate and phosphate anions arises possibly from the arsenate-dihydrotetrazine hydrogen bonding. In the next step, colorimetric tests using MIL-140(Zr)-DHTZ were conducted to discriminate the arsenate from phosphate with a very low detection limit at nanomolar level. This MOF undergoes a yellow-to-pink color change in the presence of arsenate ions, while no color change is observed in the presence of phosphate. This color change is observed through conversion of dihydrotetrazine sites inside the pores of MIL-140(Zr)-DHTZ into tetrazine. Altogether, the PL response of UiO-66(Zr)-DHTZ is originated from the hydrogen bond-donating/accepting character of DHTZ function, while the colorimetric response of MIL-140(Zr)-DHTZ is based on the chemical conversion of DHTZ function. This work clearly shows that the decoration of Zr-based MOFs with multicharacter functional groups can develop their application in wastewater treatment as multipurpose platforms.

Decoration of β-Cyclodextrin and Tuning Active Layer Chemistry Leading to Nanofiltration Membranes for Desalination and Wastewater Decontamination

Given the huge potential of thin film composite (TFC) nanofiltration (NF) membranes for desalination and micro-pollutant removal, two different sets of six NF membranes were synthesized. The molecular structure of the polyamide active layer was tuned by using two different cross-linkers, terephthaloyl chloride (TPC) and trimesoyl chloride (TMC), reacted with tetra-amine solution containing β-Cyclodextrin (BCD). To further tune the structure of the active layers, the time duration of interfacial polymerization (IP) was varied from 1 to 3 min. The membranes were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), water contact angle (WCA), attenuated total reflectance Fourier transform infra-red (ATR-FTIR) spectroscopy, elemental mapping and energy dispersive (EDX) analysis. The six fabricated membranes were tested for their ability to reject divalent and monovalent ions followed by rejection of micro-pollutants (pharmaceuticals). Consequently, terephthaloyl chloride turned out to be the most effective crosslinker for the fabrication of membrane active layer with tetra-amine in the presence of β-Cyclodextrin using interfacial polymerization reaction for 1 min. The membrane fabricated using TPC crosslinker (BCD-TA-TPC@PSf) showed higher % rejection for divalent ions (Na₂SO₄ = 93%; MgSO₄ = 92%; MgCl₂ = 91%; CaCl₂ = 84%) and micro-pollutants (Caffeine = 88%; Sulfamethoxazole = 90%; Amitriptyline HCl = 92%; Loperamide HCl = 94%) compared to the membrane fabricated using TMC crosslinker (BCD-TA-TMC@PSf). For the BCD-TA-TPC@PSf membrane, the flux was increased from 8 LMH (L/m².h) to 36 LMH as the transmembrane pressure was increased from 5 bar to 25 bar.