Creation of 3-Dimensional Life Size: Patient-Specific C1 Fracture Models for Screw Fixation

Properties and Implementation of 3-Dimensionally Printed Models in Spine Surgery: A Mixed-Methods Review With Meta-Analysis

OBJECTIVE

Spine surgery addresses a wide range of spinal pathologies. Potential applications of 3-dimensional (3D) printed in spine surgery are broad, encompassing education, planning, and simulation. The objective of this study was to explore how 3D-printed spine models are implemented in spine surgery and their clinical applications.

METHODS

Methods were combined to create a scoping review with meta-analyses. PubMed, EMBASE, the Cochrane Library, and Scopus databases were searched from 2011 to 7 September 2021. Results were screened independently by 2 reviewers. Studies utilizing 3D-printed spine models in spine surgery were included. Articles describing drill guides, implants, or nonoriginal research were excluded. Data were extracted according to reporting guidelines in relation to study information, use of model, 3D printer and printing material, design features of the model, and clinical use/patient-related outcomes. Meta-analyses were performed using random-effects models.

RESULTS

Forty articles were included in the review, 3 of which were included in the meta-analysis. Primary use of the spine models included preoperative planning, education, and simulation. Six printing technologies were utilized. A range of substrates were used to recreate the spine and regional pathology. Models used for preoperative and intraoperative planning showed reductions in key surgical performance indicators. Generally, feedback for the tactility, utility, and education use of models was favorable.

CONCLUSIONS

Replicating realistic spine models for operative planning, education, and training is invaluable in a subspeciality where mistakes can have devastating repercussions. Future study should evaluate the cost-effectiveness and the impact spine models have of spine surgery outcomes.

Three-Dimensional Printing in Neurosurgery: A Review of Current Indications and Applications and a Basic Methodology for Creating a Three-Dimensional Printed Model for the Neurosurgical Practice

Introduction Three-dimensional (3D) printing is an affordable aid that is useful in neurosurgery. It allows for better visualization and tactile appreciation of the individual anatomy and regions of interest and therefore potentially lowers the risk of complications. There are various applications of this technology in the field of neurosurgery. Materials and methods In this paper, we present a basic methodology for the creation of a 3D printed model using only open-source software for medical image editing, model generation, pre-printing preparation, and analysis of the literature concerning the practical use of this methodology. Results The literature review on the current applications of 3D printed models in neurosurgery shows that they are mostly used for preoperative planning, surgical training, and simulation, closely followed by their use in patient-specific implants and instrumentation and medical education. Materialise^TM Mimics is the most frequently used commercial software for a 3D modeling for preoperative planning and surgical simulation, while the most popular open-source software for the same applications is 3D Slicer. In this paper, we present the algorithm that we employ for 3D printing using Horos^TM, Blender, and Cura software packages which are all free and open-source. Conclusion Three-dimensional printing is becoming widely available and of significance to neurosurgical practice. Currently, there are various applications of this technology that are less demanding in terms of technical knowledge and required fluency in medical imaging software. These predispositions open the field for further research on the possible use of 3D printing in neurosurgery.

Patient-centered oncosurgical planning with cancer models in subspecialty education

BACKGROUND

A fundamental aspect of oncosurgical planning in organ resections is the identification of feeder vessel details to preserve healthy organ tissue while fully resecting the tumors. The purpose of this study was to determine whether three-dimensional (3D) cancer case models of computed tomography (CT) images will assist resident-level trainees in making appropriate operative plans for organ resection surgery.

METHODS

This study was based on the perception of surgery residents who were presented with 5 different oncosurgical scenarios. A five-station carousel including cases of liver mass, stomach mass, annular pancreas, pelvic mass and mediastinal mass was formed for the study. The residents were required to compare their perception level of the cases with their CT images, and 3D models in terms of identifying the invasion of the mass, making differential diagnosis and preoperative planning stage.

RESULTS

All residents have given higher scores for models. 3D models provided better understanding of oncopathological anatomy and improved surgical planning. In all scenarios, 70-80% of the residents preferred the model for preoperative planning. For surgical choice, compared to the CT, the model provided a statistically significant difference in terms of visual assessment, such as tumor location, distal or proximal organotomy (p:0.009). In the evaluation of presacral mass, the perception of model was significantly better than the CT in terms of bone-foramen relationship of chondrosarcoma, its origin, geometric shape, localization, invasion, and surgical preference (p:0.004). The model statistically significantly provided help to evaluate and prepare the case together with the colleagues performing surgery (p:0.007). Commenting on the open-ended question, they stated that the tumor-vessel relationship was clearly demonstrated in the 3D model, which has been very useful.

CONCLUSIONS

With the help of 3D printing technology in this study, it is possible to implement and evaluate a well-structured real patient scenario setup in cancer surgery training. It can be used to improve the understanding of pathoanatomical changes of multidisciplinary oncologic cases. Namely, it is used in guiding the surgical strategy and determining whether patient-specific 3D models change pre-operative planning decisions made by surgeons in complex cancer mass surgical procedures.

Surgical planning with patient-specific three-dimensional printed pancreaticobiliary disease models - Cross-sectional study

BACKGROUND

Three-dimensional (3D) printing has been increasingly used in medical applications with the creation of accurate patient-specific 3D printed models in medical imaging data. This study has been planned based on the fact that research on 3D printing in pancreaticobiliary disease is limited due to lack of studies on validation of model accuracy.

METHODS

This is an innovative study where general surgery residents are presented 5 distinct hepatopancreatobiliary disease scenarios to generate a perception and required to compare their perception level of these cases with magnetic resonance cholangiopancreatography (MRCP), 3D images and 1:1 solid models that the pathology, diverse diagnosis and presurgery diagnosis stages can be observed. This study is single-centered.

RESULTS

The dilated pancreaticobiliary intervention based on scenarios for general surgery residency was more original since there was no prior study that includes both model building and the evaluation of the perception created by the model. Five scenarios provided qualitative assessment with results showing the usefulness of 3D models when used as clinical tools in preoperative planning, simulation of interventional procedures, surgical education, and training. The perception level in the 3D model, MRCP (Z: 3.854, p: 0.000) and the 3D image (Z: 2.865, p: 0.004) was higher; likewise, the 3D-STL image was higher compared to the MRCP image (Z: 3.779, p: 0.000). All subspecialists agree that 3D models provided better understanding of dilated pancreaticobiliary pathoanatomy and improved surgical planning.

CONCLUSIONS

A thoroughly outlined genuine patient situation layout aimed for general surgery training can be installed and monitored with the support of 3D printing technology of this study. This can be utilized to develop the comprehension of pathoanatomical variations of complex pancreaticobiliary illness and to adopt a surgical approach.

3D-printed Titanium Prosthetic Reconstruction of the C2 Vertebra: Techniques and Outcomes of Three Consecutive Cases

STUDY DESIGN

Three patients were treated at our center with patient-specific three-dimensional (3D)-printed titanium prostheses for the reconstruction of structurally compromised C2 vertebrae.

OBJECTIVE

To describe our surgical and device design approach to these clinical scenarios and evaluate their outcomes.

SUMMARY OF BACKGROUND DATA

There are a limited but increasing number of case reports and series describing the use of 3D-printed prostheses for high cervical surgery.

METHODS

We have collated and reviewed three cases using patient-specific 3D-printed prostheses.

RESULTS

We report two cases arising from neoplastic destruction; one resulting from metastatic medullary thyroid carcinoma, and the other from multiple myeloma. We additionally describe a case of C2 compromise as a complication of rheumatoid arthritis. All patients included in this report achieved successful surgical outcomes and symptom relief without significant complication. Clinical and radiological follow-up has demonstrated good outcomes in all cases up to 14-months postprocedure.

CONCLUSIONS

These cases describe successful use of custom 3D-printed prostheses for reconstruction of the anterior vertebral column through C2, and add to the emerging body of literature detailing the use of custom prostheses for complex spinal surgery.

LEVEL OF EVIDENCE

4.

Three-Dimensional Printed Anatomical Models Help in Correcting Foot Alignment in Hallux Valgus Deformities

BACKGROUND

Hallux valgus (HV) is the most common pathologic entity affecting the great toe. The goal of corrective surgery is to restore foot mechanics and provide pain relief. The purpose of the study was to create individual angle using life-size foot models with three-dimensional (3D) printing technology to design a section on HV osteotomy.

MATERIALS AND METHODS

Ten female patients with a diagnosis of HV were included. Radiologic [HV angle and intermetatarsal (IM) angle] and clinical [American Orthopaedic Foot and Ankle Score (AOFAS)] assessment was done pre- and postoperatively. All the operations were planned together with 3D life-size models generated from computed tomography (CT) scans. Benefits of using the 3D life-size models were noted. The 3D model's perception was evaluated.

RESULTS

The mean AOFAS score, mean HV, and IM angles had improved significantly (P < 0.05). The visual and tactile inspection of 3D models allowed the best anatomical understanding, with faster and clearer comprehension of the surgical planning. At the first tarsometatarsal joint, the HV models showed significantly greater dorsiflexion, inversion, and adduction of the first metatarsal relative to the medial cuneiform. At the first metatarsophalangeal joint, the HV models showed significantly greater eversion and abduction of the first proximal phalanx relative to the first metatarsal. It provided satisfactory results about operation time and blood loss. 3D model's perception was statistically significant (P < 0.05).

CONCLUSION

3D models help to transfer complex anatomical information to clinicians, which provide guidance in the preoperative planning stage, for intraoperative navigation. It helps to create a patient-specific angle section on osteotomy to correct IM angle better and improve postoperative foot function. The 3D personalized model allowed for a better perception of information when compared to the corresponding 3D reconstructed image provided.

Surgicoanatomical aspect in vascular variations of the V3 segment of vertebral artery as a risk factor for C1 instrumentation

OBJECT

Awareness of vascular anomalies in V3 segment of vertebral artery (VA) is crucial to avoid iatrogenic injuries during surgical procedure. This study aimed to analyze the incidence of V3 segment vascular variations and demonstrate the importance of deciding the surgical strategy for C1 screw placement.

METHODS

Prevalence of vascular variations and morphometric measurements of the VA in the region of the craniocervical junction in 200 cases based on three-dimensional computed tomographic angiography (3D-CTA) scans were studied.

RESULTS

The VA has a variable course through C2 before it passes above its groove on the posterior arch of C1. Following the vascular variations of V3 segments of VA were persistent including first intersegmental artery (FIA), fenestration (FEN) of the VA, high-riding (HRVA and the posterior inferior cerebellar artery (PICA) branch originating from the C1/2 part of VA. HRVA was observed in 10.1% of patients, FIA in 1.8%, FEN in 1.3%, and PICA in 1.3%. One hundred and twenty-three (24.1%) patients were identified to have HRVA, 6% present on both sides.

CONCLUSION

The VA with FIA and FEN were rare in this study as many as a 10% the VA present over the starting point for C1 lateral screw. With respect to the vascular anatomy of V3 and more frequent left-sided VA dominancy, standard screw insertion should be started from the right side. Routine preoperative 3D-CTA evaluation is mandatory to prevent the VA injury when C1-C2 instrumentation is planned.

Application of three-dimensional reconstruction and printing as an elective course for undergraduate medical students: an exploratory trial

BACKGROUND

Medical three-dimensional (3D) digital reconstruction and printing have become common tools in medicine, but few undergraduate medical students understand its whole process and teaching and clinical application. Therefore, we designed an elective course of 3D reconstruction and printing for students and studied its significance and practicability.

METHODS

Thirty undergraduate medical students in their second-year of study volunteered to participate in the course. The course started with three lessons on the theory of 3D digital reconstruction and printing in medicine. The students were then randomly divided into ten groups. Each group randomly selected its own original data set, which could contain a series of 2D images including sectional anatomical images, histological images, CT and MRI. Amira software was used to segment the structures of interest, to 3D reconstruct them and to smooth and simplify the models. These models were 3D printed and post-processed. Finally, the 3D digital and printed models were scored, and the students produced brief reports of their work and knowledge acquisition and filled out an anonymous questionnaire about their study perceptions.

RESULTS

All the students finished this course. The average score of the 30 students was 83.1 ± 2.7. This course stimulated the students' learning interest and satisfied them. It was helpful for undergraduate students to understand anatomical structures and their spatial relationship more deeply. Students understood the whole process of 3D reconstruction and printing and its teaching and clinical applications through this course.

CONCLUSION

It is significant and necessary to develop this course for undergraduate medical students.

Patient-Specific Three-Dimensional Model for a Safe Surgical Pathway in Sacral Chondrosarcoma

Sacral tumors are amongst the most challenging procedures to treat because of the complex anatomy. This study determined whether patient-specific models change preoperative planning decisions made in preparation for en bloc resection of complex sacral mass surgical procedures. Imaging showed a big encapsulated mass at the S2-3 level involving the neural foramina and obscuring the nerve roots. High-resolution images were acquired and utilized to generate a patient-specific 3D tumor model. The visual and tactile inspection of 3D models allowed the best anatomical understanding, with faster and clearer comprehension of the surgical anatomy. The 3D sacral model was for observation of previously unapparent anatomical details; with this new technology, surgeon can observe their planned surgical intervention, explore the patient-specific anatomy and extension of the tumor, and sharpen their procedure choices. Moreover, multiple planes showed how far the angles on the plane would extend for osteotomy of the sacrum. Another result was identifying correct guides and safe venture landmarks. The study helped to establish safe osteotomy line wherever the nerve roots were retained and enabled osteotomy by preserving bilaterally the S1 and S2 nerve roots for wide excision of wide excision of primary sacral tumor to get adequate bowel and bladder functions. Finally, it helped to determine whether or not the remaining bone in the sacrum is sufficient for spinopelvic stability and needed fixation. It was decided spinopelvic fixation was not necessary for this case. Surgical intervention of sacral tumors varies depending on the tumor, its size, extension, and location. Surgery can have profound risks including unnecessary nerve root resection spinopelvic instability and suboptimal oncological resection. 3D models help to transfer complex anatomical information to clinicians and provide guidance in the preoperative planning stage, for intraoperative navigation and for surgical training purposes.

Multidisciplinary Assessment of Planning and Resection of Complex Bone Tumor Using Patient-Specific 3D Model

Oncological interventions in thoracic cavity have some important problems such as choice of correct operative approaches depending on the tumor, size, extension, and location. In sarcoma surgery, wide resection should be aimed for the curative surgery. Purpose of this study was to evaluate pre-operative planning of patient-specific thoracic cavity model made by multidisciplinary surgeon team for complex tumor mass for oncological procedures. Patient's scans showed a large mass encroaching on the mediastinum and heart, with erosion of the adjacent ribs and vertebral column. Individual model of this case with thoracic tumor was reconstructed from the DICOM file of the CT data. Surgical team including six interdisciplinary surgeons explained their surgical experience of the use of 3D life-size individual model for guiding surgical treatment. Before patients consented to surgery, each surgeon explained the surgical procedure and perioperative risks to her. A questionnaire was applied to 10 surgical residents to evaluate the 3D model's perception. 3D model scans were useful in determining the site of the lesion, the exact size, extension, attachment to the surrounding structures such as lung, aorta, vertebral column, or vascular involvement, the number of involved ribs, whether the diaphragm was involved also in which order surgeons in the team enter the surgery. 3D model's perception was detected statistical significance as < 0.05. Viewing thoracic cavity with tumor model was more efficient than CT imaging. This case was surgically difficult as it included vital structures such as the mediastinal vessels, aorta, ribs, sternum, and vertebral bodies. A difficult pathology for which 3D model has already been explored to assist anatomic visualization was mediastinal osteosarcoma of the chest wall, diaphragm, and the vertebral column. The study helped to establish safe surgical line wherever the healthy tissue was retained and enabled osteotomy of the affected spinal corpus vertically with posterior-anterior direction by preserving the spinal cord and the spinal nerves above and distal the tumor. 3D tumor model helps to transfer complex anatomical information to surgeons, provide guidance in the pre-operative planning stage, for intra-operative navigation and for surgical collaboration purposes. Total radical excision of the bone tumor and reconstructions of remaining structures using life-size model was the key for successful treatment and better outcomes. The recent explosion in popularity of 3D printing is a testament to the promise of this technology and its profound utility in orthopedic oncological surgery.