Extraction Method Plays Critical Role in Antibacterial Activity of Propolis-Loaded Hydrogels

In-vitro and in-vivo investigation of wound healing efficacy of Syzygium cumini leaf extracts loaded carboxymethylcellulose film

The study focused on Syzygium cumini Leaf Extract (SCLE) loaded into Carboxymethylcellulose (CMC) film via Solution casting. Phytochemical screening revealed carbohydrates, and HPLC analysis identified quercetin, known for promoting wound healing. FT-IR spectroscopy confirmed various functional groups. X-Ray diffraction (XRD) determined the crystallite size to be 14.58 nm. Field Emission Scanning Electron Microscopy (FESEM) showed the dispersion of extracts, and Energy Dispersive X-ray (EDX) analysis detailed the weight percentages of components. Antibacterial activity tests revealed zones of inhibition for S. aureus (15 mm) and E. coli (11 mm). The film exhibited 63.11 % antioxidant activity at 517 nm with DPPH at a 750 μl sample concentration. Drug release kinetics were also studied. In-vitro wound healing using the L929 cell line showed 83 % healing at a 100 μl concentration. Over 14 days, the treatment group's wounds healed completely within 7 days, unlike the control groups which showed no recovery after 14 days. These findings indicate that the SCLE-CMC film is highly effective in promoting wound healing.

Toxicological and chemoprevention studies of Brazilian brown propolis from Araucaria sp

Brazilian brown propolis (BBP) is a natural product derived predominantly from the south region of Brazil, where Araucaria forests are dominant. Despite its potential as a source of bioactive compounds with leishmanicidal, anti-inflammatory, nociceptive, and antimicrobial properties, BBP has not been comprehensively studied compared to green propolis. Therefore, this study aimed to determine the safety and chemopreventive potential of BBP. The cytotoxicity attributed to BBP was assessed using two different assays, while the Salmonella/microsome assay was employed to evaluate mutagenicity. The acute toxicity attributed to BBP was determined using a zebrafish model, while the chemopreventive potential was investigated utilizing Chinese hamster lung (V79) cell lines. Data demonstrated that BBP exerted cytotoxic effects at concentrations greater than or equal to 10 µg/ml and did not exhibit mutagenicity in Salmonella typhimurium strains TA98 and TA100. However, at the highest concentration tested (4000 µg/plate), BBP induced a significant increase in revertant colonies in S. typhimurium TA102 strain. The LC50 equivalent to 8.83 mg/L was obtained in the acute toxicity evaluation in zebrafish. BBP also showed antigenotoxic effect by significantly reducing chromosomal damage induced by the mutagen doxorubicin in V79 cell cultures at a concentration of 2.5 μg/ml. Compared to Brazilian green and red propolis, BBP exhibited greater toxicity. On the other hand, at lower concentrations, BBP displayed chemopreventive potential, which may be associated with the antioxidant capacity of the extract. These findings contribute to a better understanding of the biological properties and potential applications of BBP in treating various diseases.

In vitro evaluation of nanocomposites of linseed mucilage and k-carrageenan loaded with Achyrocline satureioides nanoemulsion: a gradual-release candidate of antimicrobials for the treatment of bovine mastitis

This research paper presents the development and evaluation of pioneering nanocomposites (NCs) based on the combination of k-carrageenan and linseed mucilage. When loaded with macela extract nanoemulsion they present an innovative approach for the sustained release of antimicrobial herbal constituents, specifically tailored for bovine mastitis treatment. The NCs, encompassing various ratios of k-carrageenan and linseed mucilage polymers (8:2, 7:3, and 5:5 w/w) with 1.25 mg of macela extract/g of gel, underwent in vitro assessment, emphasizing viscosity, degradation speed, release of herbal actives from macela nanoemulsion and antimicrobial activity. The NCs exhibited thermoreversible characteristics, transitioning from liquid at 60°C to a gel at 25°C. NCs allowed a gradual release of phenolic compounds, reaching approximately 80% of total phenolics release (w/v) within 72 h. NCs inhibited the growth of MRSA (ATCC 33592) until 8 h of incubation. No toxic effect in vitro of NCs was found on MAC-T cells. Thus, the developed materials are relevant for the treatment of bovine mastitis, especially in the dry period, and the data support future evaluations in vivo.

Synthesis of optimized propolis solid lipid nanoparticles with desirable antimicrobial, antioxidant, and anti-cancer properties

This study aimed to produce stable propolis nanoparticles with a size below 100 nm, suitable for various applications in industries such as pharmaceuticals, medicine, cosmetics, food, and packaging. To achieve this, propolis solid lipid nanoparticles (PSLNs) were synthesized using the hot homogenization method, and the optimized nanoparticles were analyzed using Design Expert software. The properties of the synthesized PSLN were characterized using UV-visible spectroscopy, FTIR, XRD, PSA, TEM, and zeta potential analysis. The results indicated that PSLNs with a size range of 57 ± 15 nm remained stable in an aqueous medium at pH 7.4. HPLC analysis showed that the active ingredient of phenols and flavonoids in the extract remained stable after the formation of PSLNs. Antioxidant and antibacterial properties of the extract and nanoparticles were also evaluated. The results demonstrated that the biological properties of the extract were effectively preserved in PSLNs, Additionally, the PSLN synthesized exhibited remarkable anticancer properties against the A549 cell line and with IC50 of 0.01 mg/ml after 72 h-treatment. In conclusion, the optimized PSLNs can be utilized as antioxidant and antibacterial additives and have the potential to be used as a drug or drug carrier for the treatment of lung cancer.

Preparation and characterization of propolis reinforced eggshell membrane/ GelMA composite hydrogel for biomedical applications

Gelatin methacrylate-based hydrogels (GelMA) were widely used in tissue engineering and regenerative medicine. However, to manipulate their various chemical and physical properties and create high-efficiency hydrogels, different materials have been used in their structure. Eggshell membrane (ESM) and propolis are two nature-derived materials that could be used to improve the various characteristics of hydrogels, especially structural and biological properties. Hence, the main purpose of this study is the development of a new type of GelMA hydrogel containing ESM and propolis, for use in regenerative medicine. In this regard, in this study, after synthesizing GelMA, the fragmented ESM fibers were added to it and the GM/EMF hydrogel was made using a photoinitiator and visible light irradiation. Finally, GM/EMF/P hydrogels were prepared by incubating GM/EMF hydrogels in the propolis solution for 24 h. After various structural, chemical, and biological characterizations, it was found that the hydrogels obtained in this study offer improved morphological, hydrophilic, thermal, mechanical, and biological properties. The developed GM/EMF/P hydrogel presented more porosity with smaller and interconnected pores compared to the other hydrogels. GM/EMF hydrogels due to possessing EMF showed compressive strength up to 25.95 ± 1.69 KPa, which is more than the compressive strength provided by GM hydrogels (24.550 ± 4.3 KPa). Also, GM/EMF/P hydrogel offered the best compressive strength (44.65 ± 3.48) due to the presence of both EMF and propolis. GM scaffold with a contact angle of about 65.41 ± 2.199 θ showed more hydrophobicity compared to GM/EMF (28.67 ± 1.58 θ), and GM/EMF/P (26.24 ± 0.73 θ) hydrogels. Also, the higher swelling percentage of GM/EMF/P hydrogels (343.197 ± 42.79) indicated the high capacity of this hydrogel to retain more water than other scaffolds. Regarding the biocompatibility of the fabricated structures, MTT assay results showed that GM/EMF/P hydrogel significantly (p-value < 0.05) supported cell viability. Based on the results, it seems that GM/EMF/P hydrogel could be a promising biomaterial candidate for use in various fields of regenerative medicine.

Cryogels: Advancing Biomaterials for Transformative Biomedical Applications

Cryogels, composed of synthetic and natural materials, have emerged as versatile biomaterials with applications in tissue engineering, controlled drug delivery, regenerative medicine, and therapeutics. However, optimizing cryogel properties, such as mechanical strength and release profiles, remains challenging. To advance the field, researchers are exploring advanced manufacturing techniques, biomimetic design, and addressing long-term stability. Combination therapies and drug delivery systems using cryogels show promise. In vivo evaluation and clinical trials are crucial for safety and efficacy. Overcoming practical challenges, including scalability, structural integrity, mass transfer constraints, biocompatibility, seamless integration, and cost-effectiveness, is essential. By addressing these challenges, cryogels can transform biomedical applications with innovative biomaterials.

Development and Characterization of Films with Propolis to Inhibit Mold Contamination in the Dairy Industry

Due to the number of polyphenols with multiple biological activities, propolis has high potential to be used as an active agent in food protective films. Therefore, this study aimed to develop and characterize a sodium alginate film with ethanolic extract of propolis (EEP) for its potential use as protective active packaging against filamentous fungi in ripened cheese. Three different concentrations of EEP were analyzed: 0, 5 and 10% w/v. The films obtained were characterized, assessing thermal and physicochemical properties, as well as the concentration of polyphenols in the EEP and antifungal activity of the active films. The incorporation of EEP in the films generated thermal stability with respect to the loss of mass. Total color values (ΔE) of the films were affected by the incorporation of the different concentrations of EEP, showing a decrease in luminosity (L*) of the films, while the chromatic parameters a* and b* increased in direct proportion to the EEP concentration. Antifungal activity was observed with a fungistatic mode of action, stopping the growth of the fungus in cheeses without development of filamentous molds, thus increasing the shelf life of the ripened cheese under the analytical conditions, over 30 days at room temperature. Overall, EEP can be used to prevent growth and proliferation of spoilage microorganisms in cheese.

Antimicrobial Formulation of a Bacterial Nanocellulose/Propolis-Containing Photosensitizer for Biomedical Applications

With the aim of contributing to the development of more efficient materials for wound care, new topical formulations based on bacterial nanocellulose (BNC) hydrogels containing propolis were produced. Characterizations confirmed the incorporation of propolis into the BNC matrix, maintaining its structure and properties. Rheological analysis confirmed that the hydrogels showed thixotropic behavior appropriate for topical application. Chromatographic profiles showed sustained release of propolis biomarkers for at least 20 h. The formulations did not present mutagenicity. For application in photodynamic inactivation (PDI), BNC/propolis hydrogels were prepared with the photosensitizers methylene blue (MB). Spectroscopy and confocal fluorescence microscopy confirmed the interaction of MB and propolis in BNC hydrogels, as well as the formation of a new composite material. In the antibacterial assays, formulations containing MB and propolis significantly reduced Staphylococcus aureus growth. In the presence of light, BNC/MB hydrogels completely inhibited the microorganism. Therefore, the results suggest potential materials for the prevention or treatment of Staphylococcus aureus infections in wounds.

Preparation, Characterization, and Evaluation of Cytotoxicity of Fast Dissolving Hydrogel Based Oral Thin Films Containing Pregabalin and Methylcobalamin

The oral availability of many drugs is problematic due to the pH of the stomach, enzymes, and first-pass effects through the liver. However, especially geriatric, pediatric, bedridden, or mentally handicapped patients and those with dysphagia have difficulty swallowing or chewing solid dosage forms. Oral Thin Films (OTFs) are one of the new drug delivery systems that can solve these problems. Pregabalin (PG) and Methylcobalamin (MC), which are frequently preferred for pain originating in the central nervous system, were brought together for the first time using OTF technology in this study. In this study, a quantification method for PG and MC was developed and validated simultaneously. Optimum formulations were selected with organoleptic and morphological controls, moisture absorption capacity, swelling capacity, percent elongation, foldability, pH, weight variability, thickness, disintegration time, and transparency tests on OTFs prepared by the solvent pouring method. Content uniformity, dissolution rate, determination of release kinetics, SEM, XRD, FT-IR, DSC, long-term stability, and cytotoxicity studies on the tongue epithelial cell line (SCC-9) were performed on selected OTFs. As a result, OTFs containing PG-MC, which are non-toxic, highly flexible, transparent, compatible with intraoral pH, with fast disintegration time (<30 s), and acceptable in taste and appearance, have been developed successfully.

Nanoemulsion-Based Hydrogels and Organogels Containing Propolis and Dexpanthenol: Preparation, Characterization, and Comparative Evaluation of Stability, Antimicrobial, and Cytotoxic Properties

Recently, nanoemulsion-based gels have become very popular for dermal drug delivery, overcoming the disadvantages of conventional semi-solid drug forms. The aim of this study is to prepare and characterize nanoemulsion-based hydrogels and organogels containing combined propolis and dexpanthenol, and to compare their stability, antimicrobial, and cytotoxicity properties. Within the scope of characterization studies, organoleptic properties, drug content, morphology, pH, gel-sol conversion temperature, spreadability, viscosity, FT-IR, and release properties were evaluated in hydrogels and organogels. The characterization studies carried out were subjected to short-term stability evaluation at room temperature and refrigerator for 3 months. While no phase separation was observed in any of the formulations kept in the refrigerator, phase separation was observed in four formulations kept at room temperature. The release study successfully obtained an extended release for propolis and dexpanthenol. In the antimicrobial susceptibility study, Hydrogel 1 showed activity against S. aureus, while Organogel 1 showed activity against both S. aureus and S. epidermidis. In the cytotoxicity study against HDFa cells, both Hydrogel 1 and Organogel 1 were found to be nontoxic at low doses. These hydrogels and organogels, which contain propolis and dexpanthenol in combination for the first time, are promising systems that can be used in wound and burn models in the future.

In vitro comparison between antimicrobial and antibiofilm effects of Green Propolis and Baccharis dracunculifolia against Staphylococcus pseudintermedius isolate

Staphylococcus pseudintermedius is the leading cause of canine pyoderma. Honeybee products are common to treat this and other types of infections. High average annual population loss of bees has been observed. This study evaluated antibacterial and antibiofilm profile of Green Propolis and Baccharis dracunculifolia against S. pseudintermedius and the chemical similarities among both. Ethanolic extracts were produced and chemically characterized. The isolates were subjected to treatment with the extracts in both planktonic and sessile forms. Green propolis minimum inhibitory concentration (MIC) was 0.156 mg / mL, and minimum bactericidal concentration (MBC) was 0.312mg / mL. Baccharis dracunculifolia extract MIC and MBC was 0.312mg / mL and 2.5 mg / mL, respectivelly. Both extracts reduced SD55 formation of biofilm at minimum inhibitory concentration and at 1/8 minimum inhibitory concentration. The results observed in relation to ED99, were similar for both extracts. Besides that, similar chemical indicators between both extracts, including the presence of Artepellin C, suggest that the Baccharis dracunculifolia extract could be an alternative to the Green Propolis extract in the treatment of staph infections.

Poly(vinyl alcohol)/Plant Extracts Films: Preparation, Surface Characterization and Antibacterial Studies against Gram Positive and Gram Negative Bacteria

In this study, we aim to obtain biomaterials with antibacterial properties by combining poly(vinyl alcohol) with the extracts obtained from various selected plants from Romania. Natural herbal extracts of freshly picked flowers of the lavender plant (Lavandula angustifolia) and leaves of the peppermint plant (Mentha piperita), hemp plant (Cannabis sativa L.), verbena plant (Verbena officinalis) and sage plant (Salvia officinalis folium) were selected after an intensive analyzing of diverse medicinal plants often used as antibacterial and healing agents from the country flora. The plant extracts were characterized by different methods such as totals of phenols and flavonoids content and UV-is spectroscopy. The highest amounts of the total phenolic and flavonoid contents, respectively, were recorded for Salvia officinalis. Moreover, the obtained films of poly(vinyl alcohol) (PVA) loaded with plant extracts were studied concerning the surface properties and their antibacterial or cytotoxicity activity. The Attenuated Total Reflection Fourier Transform Infrared analysis described the successfully incorporation of each plant extract in the poly(vinyl alcohol) matrix, while the profilometry demonstrated the enhanced surface properties. The results showed that the plant extracts conferred significant antibacterial effects to films toward Staphylococcus aureus and Escherichia coli and are not toxic against fibroblastic cells from the rabbit.

Design and in vitro antibiofilm activity of propolis diffusion-controlled biopolymers

In this study, a novel pH-sensitive hydrogel beads that is based on gelatin/sodium alginate/chitosan (GEL/SA/CS) loaded with propolis ethanolic extracts (PE) were synthesized. The swelling behavior of GEL/SA/CS hydrogel beads was studied in different pH solutions and compared with unloaded CS (GEL/SA) hydrogel beads. The in vitro release studies have been revealed using four different pH (1.3, 5.0, 6.0, and 6.8), a saliva environment (pH 6.8), a simulated gastric fluid (SGF) (pH 1.3), and a simulated intestinal fluid (SIF) (pH 6.8) to simulate the physiological conditions in gastrointestinal (GI) tract. Propolis-loaded hydrogel beads were found to be stable at pH 1.3, 5.0, 6.0, simulated saliva, SGF, and SIF mediums, whereas the beads lose their stability at pH 6.8 buffer solution. Tested microorganisms displayed greater sensitivity to PE-loaded hydrogel beads compared with pure propolis. Contrary to antimicrobial activity results, antibiofilm activity results of PE-loaded GEL/SA and GEL/SA/CS hydrogel beads were found at low levels. According to the obtained results, the propolis-loaded GEL/SA/CS hydrogel beads synthesized within this study can be used in the treatment of GI tract diseases such as oral mucositis, gastric ulcer, ulcerative colitis, and GI cancer, as controlled releasing carriers of propolis.

Effects of Solvent and pH on Stingless Bee Propolis in Ultrasound-Assisted Extraction

Ultrasound-assisted extraction was used to extract propolis from a dark and resinous substance harvested from a beehive of Heterotrigona itama, which is commonly known as stingless bees. The propolis extracts were prepared using ethanol and water at different pH values of 3, 6, and 9. The yield of the ethanolic extract was significantly higher than the water extract, but there were no significant differences at different pH values. The ethanolic extract was found to have a lower 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity than the water extract at pH values of 6 and 9. However, the acidic propolis extracts, particularly the ethanolic extract, were found to have the highest antioxidant capacity. The addition of 20% polyethylene glycol 400 in the solvent systems was unlikely to improve propolis extraction. This can be seen from the antioxidant capacity and metabolite profile of the propolis extracts. Gas chromatography–mass spectrometry (GC–MS)-based high throughput screening of the propolis extracts showed them to have small metabolites of hydrocarbons, esters, terpenes, and alkaloids, as well as high antioxidative 2,4-di-tert-butylphenol. The detection of mangostin, mangiferin, and a few flavanones in the acidic ethanolic extract by liquid chromatography tandem mass spectrometry LC–MS/MS proved its high antioxidant capacity compared to the water extract.

Potential Application of Propolis Extracts to Control the Growth of Stemphylium vesicarium in “Rocha” Pear

Stemphylium vesicarium (Wallr.) E. G. Simmons is the pathogen responsible of brown spot disease in pear and has become one of the main concerns for European pear producers. In Portugal, S. vesicarium is responsible for significant yield reduction and economic losses in “Rocha” pear (Pyrus communis L. cv Rocha) production. Considering the antimicrobial potential of propolis, the high incidence of brown spot in pears and the emergence of fungicides resistance in S. vesicarium, this study aimed to evaluate the potential of Portuguese propolis as an alternative strategy to control brown spot disease in “Rocha” pear. In vitro assays showed that propolis extracts were able to inhibit up to 90% the S. vesicarium mycelial growth. In vivo assays in artificially wounded and inoculated “Rocha” pears showed that, compared to the control, the disease incidence decreased up to 25% and the lesions diameter up to 57%, in fruits treated with propolis. Moreover, propolis seems to be more efficient in reducing the disease incidence when applied after pathogen inoculation (curative assay) than when applied before pathogen inoculation (prophylactic assay). Thus, the results suggest that propolis extracts have potential to be applied as part of an integrated approach for the control of brown spot of pear.

Natural Antibacterial Reagents (Centella, Propolis, and Hinokitiol) Loaded into Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] Composite Nanofibers for Biomedical Applications

Centella asiatica, propolis, and hinokitiol, as natural antibacterial reagents, were integrated into the poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (PHBH) polymer to produce antibacterial wound dressings, using electrospinning process. The results showed that the fiber diameters and surface morphology of PHBH composite nanofibers were influenced by the addition of ethanol–centella (EC), methanol–centella (MC), ethanol–propolis (EP), and ethanol–hinokitiol (EH) at various ratios compared to pristine PHBH nanofibers. From FT-IR, the nanofibrous samples with higher contents of natural antibacterial substances showed the peaks of carboxylic acid, aromatic ring, and tropolone carbon ring from centella, propolis, and hinokitiol, respectively. Furthermore, the tensile strength of neat PHBH nanofibers was increased from 8.00 ± 0.71 MPa up to 16.35 ± 1.78 MPa by loading of propolis (EP) 7% into PHBH. X-ray analysis explained that the loading of propolis (EP) was also able to increase the crystallinity in PHBH composite nanofibers from 47.0% to 54.5%. The antibacterial results demonstrated that PHBH composite nanofibers containing natural antibacterial products were potent inhibitors against the growth of Escherichia coli and Staphylococcus aureus, amongst them hinokitiol and propolis proved to be the most effective. Additionally, the release studies displayed that centella and hinokitiol had faster release from PHBH composite nanofibers in comparison to propolis.

Chemical characterization and biological activity of six different extracts of propolis through conventional methods and supercritical extraction

Propolis is a natural product with many demonstrated biological activities and propolis extract has been used in the food, pharmaceutical and cosmetics industries. Different works have showed the variations in the chemical composition, and consequently, on the biological activity of the propolis that are associated with its type and geographic origin. Due to this study evaluated propolis extracts obtained through supercritical extraction and ethanolic extraction (conventional) in three samples of different types of propolis (red, green and brown), collected from different regions in Brazil (state of Bahia). Analyses were performed to determine the humidity, water activity, the content of total ash, proteins, lipids and fiber in raw propolis samples. The content of phenolic compounds, flavonoids, in vitro antioxidant activity (DPPH), catechin, ferulic acid and luteolin and antimicrobial activity against two bacteria (Staphylococcus aureus and Escherichia coli) were determined for all extracts. For the green and red ethanolic extracts the anti-leishmanicidal potential was also evaluated. The physicochemical profiles showed agreement in relation to the literature. The results identified significant differences among the extracts (p>0.05), which are in conformity with their extraction method, as well as with type and botanical origin of the samples. The extraction with supercritical fluid was not efficient to obtain extracts with the highest contents of antioxidants compounds, when compared with the ethanolic extracts. The best results were shown for the extracts obtained through the conventional extraction method (ethanolic) indicating a higher selectivity for the extraction of antioxidants compounds. The red variety showed the largest biological potential, which included the content of antioxidants compounds. The results found in this study confirm the influence of the type of the raw material on the composition and characteristics of the extracts. The parameters analysis were important to characterize and evaluate the quality of the different Brazilian propolis extracts based on the increased use of propolis by the natural products industry.

Evaluation of the antimicrobial activity and cytotoxic effect of hydroxyapatite containing Brazilian propolis

The aim of this work was to produce hydroxyapatite powder (HA) containing the dry extract of green and red propolis, and to evaluate the possible bactericidal activity of these materials over a short period of time through a fast release system. The ethanolic extracts of green and red propolis (EEP) were incorporated into the material by spray drying. After release tests, powders containing dry EEP were characterized regarding the content of total phenolics and flavonoids. Material characterization was undertaken by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The antimicrobial activity was evaluated by plate colony counting, minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) against Staphylococcus aureus (S. aureus). The cytotoxicity of the materials was determined by the neutral red incorporation method. The materials showed apparently spherical morphology, indicating a decrease in the degree of agglomeration with the addition of propolis. Characteristic HA and propolis functional groups were observed in the FTIR. The materials showed a higher release of phenolics and lower amounts of flavonoids when compared to the EEP, with the higher amounts of flavonoids observed for HA with red propolis. A bactericidal effect was observed for all materials within the interval of 0.5 and 1 h, showing lower inhibitory activity (MIC) and higher bactericidal activity (MBC) when compared to the EEP, with the best results attributed to HA with red propolis. The IC₅₀ values (which is the concentration needed to inhibit cell growth by 50%) obtained from the cytotoxicity assay for HA with the green and red propolis lay between MIC and MCB. Considering these results, it is suggested that HA and propolis may be used as a possible antimicrobial agent, inhibiting the growth of S. aureus, although further in vivo biocompatibility should be investigated before using this material as a medical device with bactericidal potential.

Beyond PEGylation: Alternative surface-modification of nanoparticles with mucus-inert biomaterials

Mucus is a highly hydrated viscoelastic gel present on various moist surfaces in our body including the eyes, nasal cavity, mouth, gastrointestinal, respiratory and reproductive tracts. It serves as a very efficient barrier that prevents harmful particles, viruses and bacteria from entering the human body. However, the protective function of the mucus also hampers the diffusion of drugs and nanomedicines, which dramatically reduces their efficiency. Functionalisation of nanoparticles with low molecular weight poly(ethylene glycol) (PEGylation) is one of the strategies to enhance their penetration through mucus. Recently a number of other polymers were explored as alternatives to PEGylation. These alternatives include poly(2-alkyl-2-oxazolines), polysarcosine, poly(vinyl alcohol), other hydroxyl-containing non-ionic water-soluble polymers, zwitterionic polymers (polybetaines) and mucolytic enzymes. This review discusses the studies reporting the use of these polymers or potential application to facilitate mucus permeation of nanoparticles.

Laccase-Mediated Enhancement of the Antioxidant Activity of Propolis and Poplar Bud Exudates

The treatment of propolis and poplar bud exudates with laccase from Trametes versicolor and 2,2,6,6-tetramethyl-1-piperidinyloxy free radical increased the antioxidant activity, as evaluated by the 2,2'-diphenyl picrylhydrazyl (DPPH)- and t-butyl-OOH-induced DNA breakage comet assay analyses. The effect was highest for shorter reaction times. Propolis showed the highest antioxidant activity in the DPPH test, whereas poplar bud exudates were more active in reducing the t-butyl-OOH-induced lesions in the Chinese hamster ovary cell line. Even if the concentration of polyphenols decreased during the oxidation, the formation of low-molecular-weight phenols phloroglucinol 4 (1,3,5-trihydroxy benzene), hydroquinone 5 (1,4-dihydroxy benzene), and catechol 6 (1,2-dihydroxy benzene), characterized by the radical-scavenging activity, can account for the observed increase in the antioxidant activity.