Polyethylene Glycol-Poly-Lactide-co-Glycolide Block Copolymer-Based Nanoparticles as a Potential Tool for Off-Label Use of N-Acetylcysteine in the Treatment of Diastrophic Dysplasia

Identification of potential non-invasive biomarkers in diastrophic dysplasia

Diastrophic dysplasia (DTD) is a recessive chondrodysplasia caused by pathogenic variants in the SLC26A2 gene encoding for a cell membrane sulfate/chloride antiporter crucial for sulfate uptake and glycosaminoglycan (GAG) sulfation. Research on a DTD animal model has suggested possible pharmacological treatment approaches. In view of future clinical trials, the identification of non-invasive biomarkers is crucial to assess the efficacy of treatments. Urinary GAG composition has been analyzed in several metabolic disorders including mucopolysaccharidoses. Moreover, the N-terminal fragment of collagen X, known as collagen X marker (CXM), is considered a real-time marker of endochondral ossification and growth velocity and was studied in individuals with achondroplasia and osteogenesis imperfecta. In this work, urinary GAG sulfation and blood CXM levels were investigated as potential biomarkers for individuals affected by DTD. Chondroitin sulfate disaccharide analysis was performed on GAGs isolated from urine by HPLC after GAG digestion with chondroitinase ABC and ACII, while CXM was assessed in dried blood spots. Results from DTD patients were compared with an age-matched control population. Undersulfation of urinary GAGs was observed in DTD patients with some relationship to the clinical severity and underlying SLC26A2 variants. Lower than normal CXM levels were observed in most patients, even if the marker did not show a clear pattern in our small patient cohort because CXM values are highly dependent on age, gender and growth velocity. In summary, both non-invasive biomarkers are promising assays targeting various aspects of the disorder including overall metabolism of sulfated GAGs and endochondral ossification.

Inhalation potential of N-Acetylcysteine loaded PLGA nanoparticles for the management of tuberculosis: In vitro lung deposition and efficacy studies

Several studies have stated that mucus is a critical hurdle for drug delivery to the mucosal tissues. As a result, Polymeric nanoparticles that can overcome mucus barriers are gaining popularity for controlled drug delivery into intra-macrophages to attain high intracellular drug concentration. The present study was aimed to fabricate inhalable N-acetylcysteine (NAC) modified PLGA mucus penetrating particles using the double emulsion method (w/o/w) for target delivery to alveolar macrophages and minimize the dose-related adverse effects, efficiently encapsulate hydrophilic drug, sustain the release profile and prolong the retention time for the management of tuberculosis. Among the numerous formulations, the drug/polymer ratio of 1:10 with 0.50% PVA concentration and sonication time for 2 ​min ​s was chosen for further research. The formulated nanoparticles had a mean particle size of 307.50 ​± ​9.54 ​nm, PDI was 0.136 ​± ​0.02, zeta potential about -11.3 ​± ​0.4 ​mV, decent entrapment efficiency (55.46 ​± ​2.40%), drug loading (9.05 ​± ​0.22%), and excellent flowability. FTIR confirmed that NAC and PLGA were compatible with each other. SEM graphs elucidated that the nanoparticles were spherically shaped with a slightly rough surface whereas TEM analysis ensured the nanometer size nanoparticles and coating of lipid over NPs surface. PXRD spectrum concluded the transformation of the drug from crystalline to amorphous state in the formulation. In vitro release pattern was biphasic started with burst release (64.67 ​± ​1.53% within 12hrs) followed by sustained release over 48hrs thus enabling the prolonged replenishing of NAC. In vitro lung deposition study pronounced that coated NAC-PLGA-MPPs showed favorable results in terms of emitted dose (86.67 ​± ​2.52%), MMAD value (2.57 ​± ​0.12 ​μm), GSD value (1.55 ​± ​0.11 ​μm), and FPF of 62.67 ​± ​2.08% for the deposition and targeting the lungs. Finally, in vitro efficacy studies demonstrated that NAC-PLGA-MPPs presented more prominent antibacterial activity against MTB H37Rv strain as compared to NAC. Hence, PLGA based particles could be a better strategy to deliver the NAC for lung targeting.

Hyaluronic Acid-Based Nanoparticles for Protein Delivery: Systematic Examination of Microfluidic Production Conditions

Hyaluronic acid-based nanoparticles (HA NPs) can be used to deliver a protein cargo to cells overexpressing HA receptors such as CD44 since they combine the low toxicity of the carrier and the retention of the protein integrity with the receptor-mediated internalization. HA properties play a crucial but sometimes unclear role in managing the formation and stability of the meshwork, cell interactions, and ultimately the protein entrapment efficacy. Nowadays, microfluidic is an innovative technology that allows to overcome limits linked to the NPs production, guaranteeing reproducibility and control of individual batches. Taking advantage of this technique, in this research work, the role of HA weight average molecular weight (Mw) in NPs formation inside a microfluidic device has been specifically faced. Based on the relationship between polymer Mw and solution viscosity, a methodological approach has been proposed to ensure critical quality attributes (size of 200 nm, PDI ≤ 0.3) to NPs made by HA with different Mw (280, 540, 710 and 820 kDa). The feasibility of the protein encapsulation was demonstrated by using Myoglobin, as a model neutral protein, with an encapsulation efficiency always higher than 50%. Lastly, all NPs samples were successfully internalized by CD44-expressing cells.

Microfluidic-assisted synthesis of multifunctional iodinated contrast agent polymeric nanoplatforms

Contrast Induced Nephropathy is the most severe side-effect arising after non-ionic iodinated contrast agents (CAs) intravenous administration. The use of antioxidants (i.e., N-Acetylcysteine; NAC) is one of the attempted prevention approaches. Herein, we describe the microfluidic-assisted synthesis of iodinated polymeric nanoparticles (NPs) as new multifunctional blood pool CA. The aim of this research is to co-encapsulate Iohexol (IOX; iodinated CA) and NAC (preventive agent) into poly-D,L-lactide-co-glycolide (PLGA) and PEGylated-PLGA (PLGA-PEG) NPs to exploit CA diagnostic proprieties and NAC preventing antioxidant activity. A microfluidic-assisted nanoprecipitation protocol has been set-up for PLGA and PLGA-PEG NPs, evaluating the effect of formulation and microfluidic parameters by analysing the size, PDI and IOX and NAC encapsulation efficiency. The optimized NPs (PLGA-PEG, L:G 50:50, 5% PEG, Mw 90 kDa) formulated with a size of 67 ± 2.8 nm with PDI < 0.2, spherical shape, and an IOX and NAC encapsulation efficiency of 38% and 20%, respectively. The IOX and NAC encapsulation was confirmed by FTIR and DSC. In vitro release study showed an IOX retention into the polymeric matrix and NAC sustained release up to 24-48 h stating microfluidics as powerful tool for the formulation of multifunctional nanoplatforms. Finally, the protective effect of NPs and NAC were preliminary assessed on human kidney cells.

Fabrication and Applications of Microfluidic Devices: A Review

Microfluidics is a relatively newly emerged field based on the combined principles of physics, chemistry, biology, fluid dynamics, microelectronics, and material science. Various materials can be processed into miniaturized chips containing channels and chambers in the microscale range. A diverse repertoire of methods can be chosen to manufacture such platforms of desired size, shape, and geometry. Whether they are used alone or in combination with other devices, microfluidic chips can be employed in nanoparticle preparation, drug encapsulation, delivery, and targeting, cell analysis, diagnosis, and cell culture. This paper presents microfluidic technology in terms of the available platform materials and fabrication techniques, also focusing on the biomedical applications of these remarkable devices.

Improvement of the skeletal phenotype in a mouse model of diastrophic dysplasia after postnatal treatment with N-acetylcysteine

Diastrophic dysplasia (DTD) is a recessive chondrodysplasia caused by mutations in the SLC26A2 gene encoding for a sulfate/chloride transporter. When SLC26A2 is impaired intracellular level of sulfate is reduced leading to the synthesis of undersulfated proteoglycans. In normal chondrocytes, the main source of intracellular sulfate is the extracellular uptake through SLC26A2, but a small amount comes from the catabolism of sulfur-containing amino acids and other thiols. Here N-acetylcysteine (NAC), an extensively used drug, is proposed as alternative source of intracellular sulfate in an animal model of DTD (dtd mouse). Mutant and wild type mice were treated twice a day with hypodermic injections of 250 mg NAC/kg body weight for one week after birth. At the end of the treatment, an improvement trend in cartilage proteoglycan sulfation and in the skeletal phenotype of treated dtd mice were observed. Thus, a longer treatment lasted three weeks starting from birth was performed. Treated mutant mice showed a significant increase of cartilage proteoglycan sulfation and a relevant improvement of the skeletal phenotype based on measurements of several bony elements and bone quality by DEXA and micro CT. Moreover, the amelioration of the overall growth plate morphology in treated dtd mice suggested a partial rescue of the endochondral ossification process. Overall, the results prove that NAC is an effective source of intracellular sulfate for dtd mice in the postnatal period. This finding paves the way for a potential pharmacological treatment of DTD patients taking advantage from a drug repositioning strategy.

Multivariate analysis for the optimization of microfluidics-assisted nanoprecipitation method intended for the loading of small hydrophilic drugs into PLGA nanoparticles

Design of Experiment-assisted evaluation of critical process (total flow rate, TFR, flow rate ratio, FRR) and formulation (polymer concentration and structure, drug:polymer ratio) variables in a novel microfluidics-based device, a staggered herringbone micromixer (SHM), for poly(lactic-co-glycolic acid) copolymer (PLGA) nanoparticles (NPs) manufacturing was performed in order to systematically evaluate and mathematically describe their effects on NPs sizes and drug encapsulation; a small hydrophilic moiety, N-acetylcysteine, was chosen as challenging model drug. SHM-assisted nanoprecipitation method consistently yielded NPs with tailor made sizes (in the range of 100-900 nm) and polydispersity index range from 0.061 to 0.286. Significant effects on NPs sizes were highlighted for TFR and FRR: increasing TFR (from 5 to 15 mL/min) and decreasing FRR (from 1:1 to 1:5 v/v, acetonitrile: buffer) NPs with mean diameter <200 nm were obtained. SHM technique allowed for flexible, application-specific tuning of PLGA NPs size using organic solvents with relatively low toxicity (acetone, acetonitrile), varying aqueous phase composition (Tris buffer vs PVA aqueous solution) and PLGA characteristics (Mw ranging from 25-90 kDa, capped or un-capped PLGA, different lactide:glycolide molar ratio). A very satisfactory N-Ac encapsulation efficiency (more than 67%) and a prolonged release (by 168 h) were achieved.