Preparation and Characterization of Silver Sulfadiazine-Loaded Polyvinyl Alcohol Hydrogels as an Antibacterial Wound Dressing

Isolation of antibody by polymer microspheres embedded with E. coli displaying IgG-binding domain

Antibody purification is an important aspect of quality and cost control in the production process of antibody drugs. In this study, modified E. coli was embedded into polymer microspheres (polyvinyl alcohol/alginate) for antibody separation and the IgG binding domain was displayed on the surface of E. coli. The results showed that ZZ protein (Fc binding domain of the antibody) was successfully displayed on the surface of E. coli and was embedded in polyvinyl alcohol/alginate microspheres. In addition, it has excellent specific adsorption capacity for antibodies, with a maximum adsorption capacity of 35.74 mg/g (wet microspheres). Through the adsorption isotherm and adsorption kinetics simulation, the adsorption of IgG on the microsphere matrix conforms to the Langmuir model and follows the pseudo-first-order kinetic equation. The microsphere matrix can undergo saturation adsorption at pH 7.2 and desorption at around pH 3.0. Desorption characteristics are consistent with those of rProtein A Sepharose FF®. After five cycles of the adsorption-desorption processes, the IgG adsorption capacity remains above 80%. Using polymer microspheres to separate antibodies from mouse ascites, the antibody purity reached 86.7% and the yield was 83.5%. These results provide an alternative to protein A matrix with low-cost, fast preparation and moderate efficiency.

Recent Advances in Smart Hydrogels Prepared by Ionizing Radiation Technology for Biomedical Applications

Materials with excellent biocompatibility and targeting can be widely used in the biomedical field. Hydrogels are an excellent biomedical material, which are similar to living tissue and cannot affect the metabolic process of living organisms. Moreover, the three-dimensional network structure of hydrogel is conducive to the storage and slow release of drugs. Compared to the traditional hydrogel preparation technologies, ionizing radiation technology has high efficiency, is green, and has environmental protection. This technology can easily adjust mechanical properties, swelling, and so on. This review provides a classification of hydrogels and different preparation methods and highlights the advantages of ionizing radiation technology in smart hydrogels used for biomedical applications.

Phloroglucinol Derivative Carbomer Hydrogel Accelerates MRSA-Infected Wounds’ Healing

Globally, wound infection is considered to be one of the major healthcare problems, with bacterial infections being the most critical threat, leading to poor and delayed wound healing, and even death. As a superbug, methicillin-resistant Staphylococcus aureus (MRSA) causes a profound hazard to public health safety, prompting us to search for alternative treatment approaches. Herein, the MTT test and Hoechst/propidium iodide (PI) staining demonstrated that PD was slightly less toxic to human fibroblasts including Human keratinocytes (HaCaT) cell line than Silver sulfadiazine (SSD), and Vancomycin (Van). In the MRSA-infected wound model, PD hydrogel (1%, 2.5%) was applied with for 14 days. The wound healing of PD hydrogel groups was superior to the SSD, Van, and control groups. Remarkably, the experimental results showed that PD reduced the number of skin bacteria, reduced inflammation, and upregulated the expression of PCNA (keratinocyte proliferation marker) and CD31 (angiogenesis manufacturer) at the wound site by histology (including hematoxylin–eosin (HE) staining, Masson staining) and immunohistochemistry. Additionally, no toxicity, hemocompatibility or histopathological changes to organs were observed. Altogether, these results suggested the potential of PD hydrogel as a safe, effective, and low toxicity hydrogel for the future clinical treatment of MRSA-infected wounds.

Preparation and characterization of a novel hamada scoparia polysaccharide composite films and evaluation of their effect on cutaneous wound healing in rat

This work was intended to prepare biodegradable and edible films from polysaccharide extracted from Hammada scoparia leaves (named PSP) and reinforced by poly (vinyl alcohol) (PVA). Four films with different ratios of PSP/PVA: P1 (70:30), P2 (50:50), FP3 (30:70) and pure PVA (100 % PVA) were prepared and characterized in terms of structural (FT-IR), physical (Thickness, solubility and swelling index), optical and thermal properties (TGA). The antioxidant activities of different films were determined in vitro and evaluated in vivo through the examination of wound healing capability. Data revealed that the film P1 displayed the highest antioxidant activity in vitro and accelerated significantly the wound healing, after sixteen days of treatment, attested by higher wound appearance scores and a higher content of collagen (765.924 ± 4.44 mg/g of tissue) confirmed by histological examination, when compared with control, CYTOL CENTELLA® and pure PVA-treated groups. Overall, these results demonstrated that PSP/PVA based films exhibited a higher wound healing potential confirmed with the high antioxidant activities in vitro.

Functional hydrogels for diabetic wound management

Diabetic wounds often have a slow healing process and become easily infected owing to hyperglycemia in wound beds. Once planktonic bacterial cells develop into biofilms, the diabetic wound becomes more resistant to treatment. Although it remains challenging to accelerate healing in a diabetic wound due to complex pathology, including bacterial infection, high reactive oxygen species, chronic inflammation, and impaired angiogenesis, the development of multifunctional hydrogels is a promising strategy. Multiple functions, including antibacterial, pro-angiogenesis, and overall pro-healing, are high priorities. Here, design strategies, mechanisms of action, performance, and application of functional hydrogels are systematically discussed. The unique properties of hydrogels, including bactericidal and wound healing promotive effects, are reviewed. Considering the clinical need, stimuli-responsive and multifunctional hydrogels that can accelerate diabetic wound healing are likely to form an important part of future diabetic wound management.

The Development of Solvent Cast Films or Electrospun Nanofiber Membranes Made from Blended Poly Vinyl Alcohol Materials with Different Degrees of Hydrolyzation for Optimal Hydrogel Dissolution and Sustained Release of Anti-Infective Silver Salts

Introduction: We previously described the manufacture and characterization of hydrogel forming, thin film, anti-infective wound dressings made from Poly Vinyl Alcohol (PVA) and silver nanoparticles, crosslinked by heat. However, these films were designed to be inexpensive for simple manufacture locally in Africa. In this new study, we have further developed PVA dressings by manufacturing films or electrospun membranes, made from blends of PVA with different degrees of hydrolyzation, that contain silver salts and degrade in a controlled manner to release silver in a sustained manner over 12 days. Methods: Films were solvent cast as films or electrospun into nanofibre membranes using blends of 99 and 88% hydrolyzed PVA, containing 1% w/w silver sulphadiazine, carbonate, sulphate, or acetate salts. Dissolution was measured as weight loss in water and silver release was measured using inductively coupled plasma (ICP) analysis. Results: Cast films generally stayed intact at PVA 99: PVA 88% ratios greater than 40:60 whereas electrospun membranes needed ratios greater than 10:90. Films (40:60 blend ratio) and membranes (10:90) all released silver salts in a sustained fashion but incompletely and to different extents. Electrospun membranes gave more linear release patterns in the 2–12 day period and all salts released well. Conclusion: Blended PVA cast films offer improved control over hydrogel dissolution and silver release without the need for high temperature crosslinking. Blended PVA electrospun membranes further improve membrane dissolution control and silver release profiles. These blended PVA films and membranes offer improved inexpensive systems for the manufacture of long lasting anti-infective hydrogel wound dressings.

Biodegradable Electrospun Nonwovens Releasing Propolis as a Promising Dressing Material for Burn Wound Treatment

The selection of dressing is crucial for the wound healing process. Traditional dressings protect against contamination and mechanical damage of an injured tissue. Alternatives for standard dressings are regenerating systems containing a polymer with an incorporated active compound. The aim of this research was to obtain a biodegradable wound dressing releasing propolis in a controlled manner throughout the healing process. Dressings were obtained by electrospinning a poly(lactide-co-glycolide) copolymer (PLGA) and propolis solution. The experiment consisted of in vitro drug release studies and in vivo macroscopic treatment evaluation. In in vitro studies released active compounds, the morphology of nonwovens, chemical composition changes of polymeric material during degradation process, weight loss and water absorption were determined. For in vivo research, four domestic pigs, were used. The 21-day experiment consisted of observation of healing third-degree burn wounds supplied with PLGA 85/15 nonwovens without active compound, with 5 wt % and 10 wt % of propolis, and wounds rinsed with NaCl. The in vitro experiment showed that controlling the molar ratio of lactidyl to glycolidyl units in the PLGA copolymer gives the opportunity to change the release profile of propolis from the nonwoven. The in vivo research showed that PLGA nonwovens with propolis may be a promising dressing material in the treatment of severe burn wounds.

The potential use of curcumin-β-cyclodextrin inclusion complex/chitosan-loaded cellulose sponges for the treatment of chronic wound

In this research, the cellulose sponges with curcumin-β-cyclodextrin inclusion complex (CMx) and chitosan (CS) were fabricated for use as wound dressings. 1-Allyl-3-methylimidazolium chloride (AMIMCl) ionic liquid as a green solvent was used for the fabrication of cellulose sponges. Due to the low aqueous solubility and low bioavailability of curcumin, cyclodextrins (CDs) were applied and complexed with curcumin to obtain CMx. In addition, CS was incorporated in the cellulose sponges to improve the antibacterial activity of sponges. Attenuated total reflection-Fourier transform infrared (ATR-FTIR) analysis, morphological appearances, mechanical properties, water retention and weight loss, release behaviors, antibacterial activity, indirect cytotoxicity, cell attachment, and cell proliferation of the CMx/CS-loaded cellulose sponges were investigated. From the results, the cellulose sponges showed a porous structure. The incorporation of CMx and CS improved the mechanical properties when compared to the neat cellulose sponges. Moreover, the addition of CS into the cellulose sponges exhibited antibacterial activity against E. coli and S. aureus. Furthermore, the indirect cytotoxicity of the CMx/CS-loaded cellulose sponges was non-toxic and compatible with NCTC L929 and NHDF cells. Consequently, the CMx/CS-loaded cellulose sponges might be good candidates for use as wound dressing materials for the treatment of wound, especially chronic wound.

The Advances in Biomedical Applications of Carbon Nanotubes

Unique chemical, physical, and biological features of carbon nanotubes make them an ideal candidate for myriad applications in industry and biomedicine. Carbon nanotubes have excellent electrical and thermal conductivity, high biocompatibility, flexibility, resistance to corrosion, nano-size, and a high surface area, which can be tailored and functionalized on demand. This review discusses the progress and main fields of bio-medical applications of carbon nanotubes based on recently-published reports. It encompasses the synthesis of carbon nanotubes and their application for bio-sensing, cancer treatment, hyperthermia induction, antibacterial therapy, and tissue engineering. Other areas of carbon nanotube applications were out of the scope of this review. Special attention has been paid to the problem of the toxicity of carbon nanotubes.

A Functional Wound Dressing as a Potential Treatment for Cutaneous Leishmaniasis

Cutaneous leishmaniasis (CL) is a parasitic disease characterized by progressive skin sores. Currently, treatments for CL are limited to parenteral administration of the drug, which presents severe adverse effects and low cure rates. Therefore, this study aimed to develop poly(vinyl-alcohol) (PVA) hydrogels containing Amphotericin B (AmB) intended for topical treatment of CL. Hydrogels were evaluated in vitro for their potential to eliminate promastigote forms of Leishmania spp., to prevent secondary infections, to maintain appropriate healing conditions, and to offer suitable biocompatibility. AmB was incorporated into the system in its non-crystalline state, allowing it to swell more and faster than the system without the drug. Furthermore, the AmB release profile showed a continuous and controlled behavior following Higuchi´s kinetic model. AmB-loaded-PVA-hydrogels (PVA-AmB) also showed efficient antifungal and leishmanicidal activity, no cytotoxic potential for VERO cells, microbial impermeability and water vapor permeability compatible with the healthy skin's physiological needs. Indeed, these results revealed the potential of PVA-AmB to prevent secondary infections and to maintain a favorable environment for the healing process. Hence, these results suggest that PVA-AmB could be a suitable and efficient new therapeutic approach for the topical treatment of CL.