Porous Polymeric Microparticles as an Oral Drug Platform for Effective Ulcerative Colitis Treatment

Fabrication of zein-tamarind seed polysaccharide-curcumin nanocomplexes: their characterization and impact on alleviating colitis and gut microbiota dysbiosis in mice

In this work, a zein-tamarind seed polysaccharide (TSP) co-delivery system was fabricated using an anti-solvent precipitation method. The formation mechanism, characterization, and effect on alleviating colitis and gut microbiota dysbiosis in mice of zein-TSP-curcumin (Z/T-Cur) nanocomplexes were investigated. Hydrogen bonding and the hydrophobic effect played a key role in the formation of Z/T-Cur nanocomplexes, and the interactions were spontaneous and driven by enthalpy. The encapsulation efficiency, loading capacity, and bioavailability increased from 60.8% (Zein-Cur) to 91.7% (Z/T-Cur1:1), from 6.1% (Zein-Cur) to 18.3% (Z/T-Cur1:1), and from 4.7% (Zein-Cur) to 20.0% (Z/T-Cur1:1), respectively. The Z/T-Cur significantly alleviated colitis symptoms in DSS-treated mice. Additionally, the prepared nanocomplexes rebalanced the gut microbiota composition of colitis mice by increasing the abundance of Akkermansia. Odoribacter and Monoglobus were rich in the Z-T-Cur treatment group, and Turicibacter and Bifidobacterium were rich in the zein-TSP treatment group. This study demonstrated that the TSP could be helpful in the targeted drug delivery system.

Oral delivery of porous starch-loaded bilayer microgels for controlled drug delivery and treatment of ulcerative colitis

We prepared one type of bilayer microgels for oral administration with three effects: pH responsiveness, time lag, and colon enzyme degradation. Combined with the dual biological effects of curcumin (Cur) for reducing inflammation and promoting repair of colonic mucosal injury, targeted colonic localization and release of Cur according to the colonic microenvironment were enhanced. The inner core, derived from guar gum and low-methoxyl pectin, afforded colonic adhesion and degradation behavior; the outer layer, modified by alginate and chitosan via polyelectrolyte interaction, achieved colonic localization. The porous starch (PS)-mediated strong adsorption allowed Cur loading in inner core to achieve a multifunctional delivery system. In vitro, the formulations exhibited good bioresponses at different pH conditions, potentially delaying Cur release in the upper gastrointestinal tract. In vivo, dextran sulfate sodium-induced ulcerative colitis (UC) symptoms were significantly alleviated after oral administration, accompanied by reduced levels of inflammatory factors. The formulations facilitated colonic delivery, allowing Cur accumulation in colonic tissue. Moreover, the formulations could alter gut microbiota composition in mice. During Cur delivery, each formulation increased species richness, decreased pathogenic bacterial content, and afforded synergistic effects against UC. These PS-loaded bilayer microgels, exhibiting excellent biocompatibility, multi-bioresponsiveness, and colon targeting, could be beneficial in UC therapy, allowing development into a novel oral formulation.

Design and Characterization of Dexamethasone Loaded Microsponges for the Management of Ulcerative Colitis

Ulcerative colitis is an inflammatory condition with ulcerations throughout the colon. The existing remedies have some limitations such as drug inactivation, poor absorption, and adverse reactions. The present study aimed to design novel microsponge formulations to enhance remission of the dexamethasone (as a model pharmaceutical ingredient) in the colon. Microsponges were prepared by using the quasi-emulsion technique. The optimal formulation was selected by applying the design of experiments approach which used methylcellulose (MC) (0.75-2%, w/w), polyvinylalcohol (PVA)(0.5-1%, w/w), and tween 80 (TW80) (1.5-2.5%, w/w). The critical quality attributes were selected as particle size and entrapment efficiency. The particle size and encapsulation efficiency were found as 140.38 ± 9.2 µm and 77.96 ± 3.4 %. After the optimization; morphological, thermal, and physicochemical characterization studies were performed. Ultimately, the optimal formulation was investigated by using the acetic acid-induced ulcerative colitis model in rats. The physicochemical characterization studies confirmed that the formulation components were compatible with each other. The in vitro release mechanisms were fitted to First order kinetics at pH 1.2 (R²:0.9563), and Korsmeyer-Peppas kinetics at pH 4.5 (R²: 0.9877), and pH 6.8 (R²: 0.9706). The medicated microsponges exhibited remarkable recovery compared to the control group of the in vivo ulcerative colitis model (p<0.05). It could be concluded that microsponges were evaluated as a promising alternative drug delivery system for the management of ulcerative colitis.

Polylactic acid production from biotechnological routes: A review

Polylactic acid (PLA) has been highlighted as an important polymer due to its high potential for applicability in various areas, such as in the chemical, medical, pharmaceutical or biotechnology field. Very recently, studies have reported its use as a basic component for the production of personal protective equipment (PPE) required for the prevention of Sars-Cov-2 contamination, responsible for the cause of coronavirus disease, which is currently a major worldwide sanitary and social problem. PLA is considered a non-toxic, biodegradable and compostable plastic with interesting characteristics from the industrial point of view, and it emerges as a promising product under the concept of "green plastic", since most of the polymers produced currently are petroleum-based, a non-renewable raw material. Biotechnology routes have been mentioned as potential methodologies for the production of this polymer, especially by enzymatic routes, in particular by use of lipases enzymes. The availability of pure lactic acid isomers is a fundamental aspect of the manufacture of PLA with more interesting mechanical and thermal properties. Due to the technological importance that PLA-based polymers are acquiring, as well as their characteristics and applicability in several fields, especially medical, pharmaceutical and biotechnology, this review article sought to gather very recent information regarding the development of research in this area. The main highlight of this study is that it was carried out from a biotechnological point of view, aiming at a totally green bioplastic production, since the obtaining of lactic acid, which will be used as raw material for the PLA synthesis, until the degradation of the polymer obtained by biological routes.

Development of a Curcumin-Loaded Polymeric Microparticulate Oral Drug Delivery System for Colon Targeting by Quality-by-Design Approach

The purpose of this study was to apply the quality-by-design (QbD) approach for the development of colon-targeted curcumin-loaded polymeric microparticles (Col-CUR-MPs). The proportion of the enterosoluble polymer (Eudragit^® FS) in the polymeric matrix, curcumin concentration, and the concentration of the polymer mixture (Eudragit^® FS-polycaprolactone) were identified as potential risk factors for the quality of the final product following risk assessment. The influence of these variables on the critical quality attributes (CQAs) of Col-CUR-MPs was investigated. Therefore, a central composite face experimental design was used in order to determine the functional relationships between variables and product CQAs. The obtained regression model and contour plots were used to establish the design space. Finally, the model was validated by preparing two microparticulate formulations, one corresponding to the robust setpoint from within the design space and one outside the established design space, and calculating the percentage bias between the experimental and predicted values. The in vivo study, which was conducted on a fluorescein-loaded formulation that corresponded to the robust setpoint determined by QbD and that contained a mixture of polycaprolactone and Eudragit^® FS (60:40, w/w), confirmed the colon-targeting qualities of this formulation.

Micro and nanoscale technologies in oral drug delivery

Oral administration is a pillar of the pharmaceutical industry and yet it remains challenging to administer hydrophilic therapeutics by the oral route. Smart and controlled oral drug delivery could bypass the physiological barriers that limit the oral delivery of these therapeutics. Micro- and nanoscale technologies, with an unprecedented ability to create, control, and measure micro- or nanoenvironments, have found tremendous applications in biology and medicine. In particular, significant advances have been made in using these technologies for oral drug delivery. In this review, we briefly describe biological barriers to oral drug delivery and micro and nanoscale fabrication technologies. Micro and nanoscale drug carriers fabricated using these technologies, including bioadhesives, microparticles, micropatches, and nanoparticles, are described. Other applications of micro and nanoscale technologies are discussed, including fabrication of devices and tissue engineering models to precisely control or assess oral drug delivery in vivo and in vitro, respectively. Strategies to advance translation of micro and nanotechnologies into clinical trials for oral drug delivery are mentioned. Finally, challenges and future prospects on further integration of micro and nanoscale technologies with oral drug delivery systems are highlighted.