Genomic features and copper biosorption potential of a new Alcanivorax sp. VBW004 isolated from the shallow hydrothermal vent (Azores, Portugal)

AMWEst, a new thermostable and detergent-tolerant esterase retrieved from the Albian aquifer

A fosmid library was constructed with the metagenomic DNA from the high-temperature sediment-rich water of the Albian aquifer (Algeria). Functional screening of this library was subsequently done looking for genes encoding lipolytic enzymes. We identified a novel gene named AMWEst (1209 base pairs) encoding a protein of 402 amino acids with a predicted molecular weight of 43.44 kDa and conferring esterase activity. AMWEst was successfully overexpressed in the yeast mesophilic host Saccharomyces cerevisiae, and the expression system used proved to be efficient and produced sufficient activity for its biochemical characterization. Multiple sequence alignment indicated that AMWEst contained a conserved pentapeptide motif (Gly120-His121-Ser122-Gln123-Gly124). The optimum pH and temperature of the recombinant esterase AMWEst were 8 and 80 °C, respectively. Additionally, AMWEst showed higher activity towards short carbon substrates and showed maximum activity for p-nitrophenyl hexanoate (C6). Notably, AMWEst has a remarkable thermostability, and the enzyme retains almost maximum activity at 70 °C after incubation for 1 h. Moreover, enzyme activity was enhanced by high concentrations of SDS and Triton X-100 detergents. KEY POINTS: • A novel thermostable esterase has been retrieved through functional metagenomics • The esterase is detergent-tolerant, which is attractive for some applications • The esterase can be expressed in a yeast mesophilic host to enhance its yield.

Enhanced degradation of enrofloxacin in mariculture wastewater based on marine bacteria and microbial carrier

This study aimed to isolate marine bacteria to investigate their stress response, inhibition mechanisms, and degradation processes under high-load conditions of salinity and enrofloxacin (ENR). The results demonstrated that marine bacteria exhibited efficient pollutant removal efficiency even under high ENR stress (up to 10 mg/L), with chemical oxygen demand (COD), total phosphorus (TP), total nitrogen (TN) and ENR removal efficiencies reaching approximately 88%, 83%, 61%, and 73%, respectively. The predominant families of marine bacteria were Bacillaceae (50.46%), Alcanivoracaceae (32.30%), and Rhodobacteraceae (13.36%). They responded to ENR removal by altering cell membrane properties, stimulating the activity of xenobiotic-metabolizing enzymes and antioxidant systems, and mitigating ENR stress through the secretion of extracellular polymeric substance (EPS). The marine bacteria exhibited robust adaptability to environmental factors and effective detoxification of ENR, simultaneously removing carbon, nitrogen, phosphorus, and antibiotics from the wastewater. The attapulgite carrier enhanced the bacteria's resistance to the environment. When treating actual mariculture wastewater, the removal efficiencies of COD and TN exceeded 80%, TP removal efficiency exceeded 90%, and ENR removal efficiency approached 100%, significantly higher than reported values in similar salinity reactors. Combining the constructed physical and mathematical models of tolerant bacterial, this study will promote the practical implementation of marine bacterial-based biotechnologies in high-loading saline wastewater treatment.

High abundance of hydrocarbon-degrading Alcanivorax in plumes of hydrothermally active volcanoes in the South Pacific Ocean

Species within the genus Alcanivorax are well known hydrocarbon-degraders that propagate quickly in oil spills and natural oil seepage. They are also inhabitants of the deep-sea and have been found in several hydrothermal plumes. However, an in-depth analysis of deep-sea Alcanivorax is currently lacking. In this study, we used multiple culture-independent techniques to analyze the microbial community composition of hydrothermal plumes in the Northern Tonga arc and Northeastern Lau Basin focusing on the autecology of Alcanivorax. The hydrothermal vents feeding the plumes are hosted in an arc volcano (Niua), a rear-arc caldera (Niuatahi) and the Northeast Lau Spreading Centre (Maka). Fluorescence in situ hybridization revealed that Alcanivorax dominated the community at two sites (1210-1565 mbsl), reaching up to 48% relative abundance (3.5 × 104 cells/ml). Through 16S rRNA gene and metagenome analyses, we identified that this pattern was driven by two Alcanivorax species in the plumes of Niuatahi and Maka. Despite no indication for hydrocarbon presence in the plumes of these areas, a high expression of genes involved in hydrocarbon-degradation was observed. We hypothesize that the high abundance and gene expression of Alcanivorax is likely due to yet undiscovered hydrocarbon seepage from the seafloor, potentially resulting from recent volcanic activity in the area. Chain-length and complexity of hydrocarbons, and water depth could be driving niche partitioning in Alcanivorax.

Microbiome enrichment from contaminated marine sediments unveils novel bacterial strains for petroleum hydrocarbon and heavy metal bioremediation

Petroleum hydrocarbons and heavy metals are some of the most widespread contaminants affecting marine ecosystems, urgently needing effective and sustainable remediation solutions. Microbial-based bioremediation is gaining increasing interest as an effective, economically and environmentally sustainable strategy. Here, we hypothesized that the heavily polluted coastal area facing the Sarno River mouth, which discharges >3 tons of polycyclic aromatic hydrocarbons (PAHs) and ∼15 tons of heavy metals (HMs) into the sea annually, hosts unique microbiomes including marine bacteria useful for PAHs and HMs bioremediation. We thus enriched the microbiome of marine sediments, contextually selecting for HM-resistant bacteria. The enriched mixed bacterial culture was subjected to whole-DNA sequencing, metagenome-assembled-genomes (MAGs) annotation, and further sub-culturing to obtain the major bacterial species as pure strains. We obtained two novel isolates corresponding to the two most abundant MAGs (Alcanivorax xenomutans strain-SRM1 and Halomonas alkaliantarctica strain-SRM2), and tested their ability to degrade PAHs and remove HMs. Both strains exhibited high PAHs degradation (60-100%) and HMs removal (21-100%) yield, and we described in detail >60 genes in their MAGs to unveil the possible genetic basis for such abilities. Most promising yields (∼100%) were obtained towards naphthalene, pyrene and lead. We propose these novel bacterial strains and related genetic repertoire to be further exploited for effective bioremediation of marine environments contaminated with both PAHs and HMs.

Combined effects of copper oxide and nickel oxide coated chitosan nanoparticles adsorbed to styrofoam resin beads on hydrothermal vent bacteria

Microplastics are potential carriers of harmful contaminants but their combined effects are largely unknown. It needs intensive monitoring in order to achieve a better understanding of metal-oxide nanoparticles and their dispersion via microplastics such as styrofoam in the aquatic environment. In the present study, an effort was made to provide a preferable perception about the toxic effects of engineered nanoparticles (NPs), namely, copper oxide (CuO NPs), nickel oxide (NiO NPs), copper oxide/chitosan (CuO/CS NPs) and nickel oxide/chitosan (NiO/CS NPs). Characterizations of synthesized NPs included their morphology (SEM and EDX), functional groups (FT-IR) and crystallinity (XRD). Their combined toxic effect after adsorption to styrofoam (SF) was monitored using the hydrothermal vent bacterium Jeotgalicoccus huakuii as a model. This was done by determining MIC (minimum inhibitory concentration) through a resazurin assay measuring ELISA, growth, biofilm inhibition and making a live and dead assay. Results revealed that at high concentrations (60 mg/10 mL) of CuO, CuO/CS NPs and 60 mg of SF adsorbed CuO and CuO/CS NPs inhibited the growth of J. huakuii. However, NPs rather than SF inhibited the growth of bacteria. The toxicity of NPs adsorbed on plain SF was found to be less compared to NPs alone. This study revealed new dimensions regarding the positive impacts of SF at low concentrations. Synthesized NPs applied separately were found to affect the growth of bacteria substantially more than if coated to SF resin beads.

Potential autotrophic carbon-fixer and Fe(II)-oxidizer Alcanivorax sp. MM125-6 isolated from Wocan hydrothermal field

The genus Alcanivorax is common in various marine environments, including in hydrothermal fields. They were previously recognized as obligate hydrocarbonoclastic bacteria, but their potential for autotrophic carbon fixation and Fe(II)-oxidation remains largely elusive. In this study, an in situ enrichment experiment was performed using a hydrothermal massive sulfide slab deployed 300 m away from the Wocan hydrothermal vent. Furthermore, the biofilms on the surface of the slab were used as an inoculum, with hydrothermal massive sulfide powder from the same vent as an energy source, to enrich the potential iron oxidizer in the laboratory. Three dominant bacterial families, Alcanivoraceae, Pseudomonadaceae, and Rhizobiaceae, were enriched in the medium with hydrothermal massive sulfides. Subsequently, strain Alcanivorax sp. MM125-6 was isolated from the enrichment culture. It belongs to the genus Alcanivorax and is closely related to Alcanivorax profundimaris ST75FaO-1^T (98.9% sequence similarity) indicated by a phylogenetic analysis based on 16S rRNA gene sequences. Autotrophic growth experiments on strain MM125-6 revealed that the cell concentrations were increased from an initial 7.5 × 10⁵ cells/ml to 3.13 × 10⁸ cells/ml after 10 days, and that the δ¹³C_VPDB in the cell biomass was also increased from 234.25‰ on day 2 to gradually 345.66 ‰ on day 10. The gradient tube incubation showed that bands of iron oxides and cells formed approximately 1 and 1.5 cm, respectively, below the air-agarose medium interface. In addition, the SEM-EDS data demonstrated that it can also secrete acidic exopolysaccharides and adhere to the surface of sulfide minerals to oxidize Fe(II) with NaHCO₃ as the sole carbon source, which accelerates hydrothermal massive sulfide dissolution. These results support the conclusion that strain MM125-6 is capable of autotrophic carbon fixation and Fe(II) oxidization chemoautotrophically. This study expands our understanding of the metabolic versatility of the Alcanivorax genus as well as their important role(s) in coupling hydrothermal massive sulfide weathering and iron and carbon cycles in hydrothermal fields.

Microbial community succession in response to sludge composting efficiency and heavy metal detoxification during municipal sludge composting

This study researched microbial community succession in response to sludge composting efficiency and heavy metal detoxification during municipal sludge co-composting with spent mushroom and spent bleaching. The change law of key physicochemical properties, the heavy metals contents and forms during composting were analyzed, and the passivation of heavy metals after composting was explored. High-throughput sequencing was used to analyze the microbial community structure of treat 2 during composting, and the correlation analysis of microbial community structure with heavy metal contents and forms were carried out. The results showed that the sludge of each treatment reached composting maturity after 26 days of composting. Organic matter content, electrical conductivity, pH and seed germination index of treat 2 were all in line with the standard limit of agricultural sludge. Because of the presence of compost bacteria addition, the passivating heavy metals performance of treat 2 satisfied the standard limit of agricultural sludge after composting, which was superior to that of treat 1 and treat 3. The diversity of microbial communities in treat 2 decreased during composting. Extensive bacteria such as Bacillus, Geobacter, Lactobacillus, and Pseudomonas, which possessed the abilities of heavy metal passivation and organic oxidizing, were dominant in treat 2 during the heating stage. However, as composting proceeded, Tuberibacillus with ability of organic oxidizing gradually became the most dominant species at the thermophilic and cooling stages. Changes in microbial function varied from changes of microbial community in treat 2, subsequently affected the performances of heavy metal passivation and organic oxidizing during composting.

Biogenic Synthesis of Copper Nanoparticles Using Bacterial Strains Isolated from an Antarctic Consortium Associated to a Psychrophilic Marine Ciliate: Characterization and Potential Application as Antimicrobial Agents

In the last decade, metal nanoparticles (NPs) have gained significant interest in the field of biotechnology due to their unique physiochemical properties and potential uses in a wide range of applications. Metal NP synthesis using microorganisms has emerged as an eco-friendly, clean, and viable strategy alternative to chemical and physical approaches. Herein, an original and efficient route for the microbial synthesis of copper NPs using bacterial strains newly isolated from an Antarctic consortium is described. UV-visible spectra of the NPs showed a maximum absorbance in the range of 380–385 nm. Transmission electron microscopy analysis showed that these NPs are all monodispersed, spherical in nature, and well segregated without any agglomeration and with an average size of 30 nm. X-ray powder diffraction showed a polycrystalline nature and face centered cubic lattice and revealed characteristic diffraction peaks indicating the formation of CuONPs. Fourier-transform infrared spectra confirmed the presence of capping proteins on the NP surface that act as stabilizers. All CuONPs manifested antimicrobial activity against various types of Gram-negative; Gram-positive bacteria; and fungi pathogen microorganisms including Escherichia coli, Staphylococcus aureus, and Candida albicans. The cost-effective and eco-friendly biosynthesis of these CuONPs make them particularly attractive in several application from nanotechnology to biomedical science.

Biosorption: A Review of the Latest Advances

Biosorption is a variant of sorption techniques in which the sorbent is a material of biological origin. This technique is considered to be low cost and environmentally friendly, and it can be used to remove pollutants from aqueous solutions. The objective of this review is to report on the most significant recent works and most recent advances that have occurred in the last couple of years (2019–2020) in the field of biosorption. Biosorption of metals and organic compounds (dyes, antibiotics and other emerging contaminants) is considered in this review. In addition, the use and possibilities of different forms of biomass (live or dead, modified or immobilized) are also considered.