Simulation-based partial volume correction for dopaminergic PET imaging: Impact of segmentation accuracy

FAST (fast analytical simulator of tracer)-PET: an accurate and efficient PET analytical simulation tool

Objective.Simulation of positron emission tomography (PET) images is an essential tool in the development and validation of quantitative imaging workflows and advanced image processing pipelines. Existing Monte Carlo or analytical PET simulators often compromise on either efficiency or accuracy. We aim to develop and validate fast analytical simulator of tracer (FAST)-PET, a novel analytical framework, to simulate PET images accurately and efficiently.Approach. FAST-PET simulates PET images by performing precise forward projection, scatter, and random estimation that match the scanner geometry and statistics. Although the same process should be applicable to other scanner models, we focus on the Siemens Biograph Vision-600 in this work. Calibration and validation of FAST-PET were performed through comparison with an experimental scan of a National Electrical Manufacturers Association (NEMA) Image Quality (IQ) phantom. Further validation was conducted between FAST-PET and Geant4 Application for Tomographic Emission (GATE) quantitatively in clinical image simulations in terms of intensity-based and texture-based features and task-based tumor segmentation.Main results.According to the NEMA IQ phantom simulation, FAST-PET's simulated images exhibited partial volume effects and noise levels comparable to experimental images, with a relative bias of the recovery coefficient RC within 10% for all spheres and a coefficient of variation for the background region within 6% across various acquisition times. FAST-PET generated clinical PET images exhibit high quantitative accuracy and texture comparable to GATE (correlation coefficients of all features over 0.95) but with ∼100-fold lower computation time. The tumor segmentation masks comparison between both methods exhibited significant overlap and shape similarity with high concordance CCC > 0.97 across measures.Significance.FAST-PET generated PET images with high quantitative accuracy comparable to GATE, making it ideal for applications requiring extensive PET image simulations such as virtual imaging trials, and the development and validation of image processing pipelines.

Investigation of the imaging characteristics of the ALBIRA II small animal PET system for 18F, 68Ga and 64Cu

AIM

In this study the performance characteristics of the Albira II PET sub-system and the response of the system for the following radionuclides ¹⁸F, ⁶⁸Ga and ⁶⁴Cu was analyzed.

MATERIALS AND METHODS

The Albira II tri-modal system (Bruker BioSpin MRI GmbH, Ettlingen, Germany) is a pre-clinical device for PET, SPECT and CT. The PET sub-system uses single continuous crystal detectors of lutetium yttrium orthosilicate (LYSO). The detector assembly consists of three rings of 8 detector modules. The transaxial field of view (FOV) has a diameter of 80mm and the axial FOV is 148mm. A NEMA NU-4 image quality phantom (Data Spectrum Corporation, Durham, USA) having five rods with diameters of 1, 2, 3, 4 and 5mm and a uniform central region was used. Measurements with ¹⁸F, ⁶⁸Ga and ⁶⁴Cu were performed in list mode acquisition over 10h. Data were reconstructed using a maximum-likelihood expectation-maximization (MLEM) algorithm with iteration numbers between 5 and 50. System sensitivity, count rate linearity, convergence and recovery coefficients were analyzed.

RESULTS

The sensitivities for the entire FOV (non-NEMA method) for ¹⁸F, ⁶⁸Ga and ⁶⁴Cu were (3.78±0.05)%, (3.97±0.18)% and (3.79±0.37)%, respectively. The sensitivity based on the NEMA protocol using the ²²Na point source yielded (5.53±0.06)%. Dead-time corrected true counts were linear for activities ≤7MBq (¹⁸F and ⁶⁸Ga) and ≤17MBq (⁶⁴Cu) in the phantom. The radial, tangential and axial full widths at half maximum (FWHMs) were 1.52, 1.47 and 1.48mm. Recovery coefficients for the uniform region with a total activity of 8MBq in the phantom were (0.97±0.05), (0.98±0.06), (0.98±0.06) for ¹⁸F, ⁶⁸Ga and ⁶⁴Cu, respectively.

CONCLUSION

The Albira II pre-clinical PET system has an adequate sensitivity range and the system linearity is suitable for the range of activities used for pre-clinical imaging. Overall, the system showed a favorable image quality for pre-clinical applications.