Reduction of beam hardening artifacts on real C-arm CT data using polychromatic statistical image reconstruction

Application of MLP neural network to predict X-ray spectrum from tube voltage, filter material, and filter thickness used in medical imaging systems

The X-ray energy spectrum is crucial for image quality and dosage assessment in mammography, radiography, fluoroscopy, and CT which are frequently used for the diagnosis of many diseases including but not limited to patients with cardiovascular and cerebrovascular diseases. X-ray tubes have an electron filament (cathode), a tungsten/rubidium target (anode) oriented at an angle, and a metal filter (aluminum, beryllium, etc.) that may be placed in front of an exit window. When cathode electrons meet the anode, they generate X-rays with varied energies, creating a spectrum from zero to the electrons' greatest energy. In general, the energy spectrum of X-rays depends on the electron beam's energy (tube voltage), target angle, material, filter thickness, etc. Thus, each imaging system's X-ray energy spectrum is unique to its tubes. The primary goal of the current study is to develop a clever method for quickly estimating the X-ray energy spectrum for a variety of tube voltages, filter materials, and filter thickness using a small number of unique spectra. In this investigation, two distinct filters made of beryllium and aluminum with thicknesses of 0.4, 0.8, 1.2, 1.6, and 2 mm were employed to obtain certain limited X-ray spectra for tube voltages of 20, 30, 40, 50, 60, 80, 100, 130, and 150 kV. The three inputs of 150 Multilayer Perceptron (MLP) neural networks were tube voltage, filter type, and filter thickness to forecast the X-ray spectra point by point. After training, the MLP neural networks could predict the X-ray spectra for tubes with voltages between 20 and 150 kV and two distinct filters made of aluminum and beryllium with thicknesses between 0 and 2 mm. The presented methodology can be used as a suitable, fast, accurate and reliable alternative method for predicting X-ray spectrum in medical applications. Although a technique was put out in this work for a particular system that was the subject of Monte Carlo simulations, it may be applied to any genuine system.

Proposing an intelligent technique based on radial basis function neural network to forecast the energy spectrum of diagnostic X-ray imaging systems

In digital subtraction angiography (digital subtraction total cerebral angiography), cardiac and macrovascular cardiography, anorectal radiology, fluoroscopy, and computed tomography (CT), a prior knowledge to X-ray energy spectrum is crucial for assessing the image quality and also calculating patient X-ray dosage. The present investigation's main objective is to propose an intelligent technique for faster calculating X-ray energy spectrum of medical imaging systems with different exposure settings of tube voltage, filter material, and thickness based on limited specific spectra. In this study, Monte Carlo N Particle (MCNP) simulation code was initially used to generate some limited X-ray spectra for tube voltages of 20, 30, 40, 50, 80, 100, 130, and 150 kV for two different filters of beryllium and aluminum with thicknesses of 0. 4, 0.8, 1.2, 1.6 and 2 mm. Tube voltage, type, and thickness of filter were used as the 3 inputs of 150 Radial Basis Function Neural Network (RBFNN) to forecast point by point of the X-ray spectrum. After training, the RBFNNs could forecast most of the X-ray spectra for tube voltages in the range of 20-150 kV and two various filters of aluminum and beryllium with thicknesses in the range of 0-2 mm.

End-to-End Deep Learning CT Image Reconstruction for Metal Artifact Reduction

Metal artifacts are common in CT-guided interventions due to the presence of metallic instruments. These artifacts often obscure clinically relevant structures, which can complicate the intervention. In this work, we present a deep learning CT reconstruction called iCTU-Net for the reduction of metal artifacts. The network emulates the filtering and back projection steps of the classical filtered back projection (FBP). A U-Net is used as post-processing to refine the back projected image. The reconstruction is trained end-to-end, i.e., the inputs of the iCTU-Net are sinograms and the outputs are reconstructed images. The network does not require a predefined back projection operator or the exact X-ray beam geometry. Supervised training is performed on simulated interventional data of the abdomen. For projection data exhibiting severe artifacts, the iCTU-Net achieved reconstructions with SSIM = 0.970±0.009 and PSNR = 40.7±1.6. The best reference method, an image based post-processing network, only achieved SSIM = 0.944±0.024 and PSNR = 39.8±1.9. Since the whole reconstruction process is learned, the network was able to fully utilize the raw data, which benefited from the removal of metal artifacts. The proposed method was the only studied method that could eliminate the metal streak artifacts.

Harnessing X-Ray Energy-Dependent Attenuation of Bismuth-Based Nanoprobes for Accurate Diagnosis of Liver Fibrosis

Timely detection of liver fibrosis by X-ray computed tomography (CT) can prevent its progression to fatal liver diseases. However, it remains quite challenging because conventional CT can only identify the difference in density instead of X-ray attenuation characteristics. Spectral CT can generate monochromatic imaging to specify X-ray attenuation characteristics of the scanned matter. Herein, an X-ray energy-dependent attenuation strategy originated from bismuth (Bi)-based nanoprobes (BiF3 @PDA@HA) is proposed for the accurate diagnosis of liver fibrosis. Bi element in BiF3 @PDA@HA can exhibit characteristic attenuation depending on different levels of X-ray energy via spectral CT, and that is challenging for conventional CT. In this study, selectively accumulating BiF3 @PDA@HA nanoprobes in the hepatic fibrosis areas can significantly elevate CT value for 40 Hounsfield units on 70 keV monochromatic images, successfully differentiating from healthy livers and achieving the diagnosis of liver fibrosis. Furthermore, the enhancement produced by the BiF3 @PDA@HA nanoprobes in vivo increases as the monochromatic energy decreases from 70 to 40 keV, optimizing the conspicuity of the diseased areas. As a proof of concept, the strategically designed nanoprobes with energy-dependent attenuation characteristics not only expand the scope of CT application, but also hold excellent potential for precise imaging-based disease diagnosis.