Mechanical properties of harbor seal skin and blubber − a test of anisotropy

How venom pore placement may influence puncture performance in snake fangs

When designing experimental studies, it is important to understand the biological context of the question being asked. For example, many biological puncture experiments embed the puncture tool to a standardized depth based on a percentage of the total tool length, to compare the performance between tools. However, this may not always be biologically relevant to the question being asked. To understand how definitions of penetration depth may influence comparative results, we performed puncture experiments on a series of venomous snake fangs using the venom pore location as a functionally relevant depth standard. After exploring variation in pore placement across snake phylogeny, we compared the work expended during puncture experiments across a set of snake fangs using various depth standards: puncture initiation, penetration to a series of depths defined by the venom pore and penetration to 15% of fang length. Contrary to our hypothesis, we found almost no pattern in pore placement between clades, dietary groups or venom toxicity. Rank correlation statistics of our experimental energetics results showed no difference in the broad comparison of fangs when different puncture depth standards were used. However, pairwise comparisons between fangs showed major shifts in significance patterns between the different depth standards used. These results imply that the interpretation of experimental puncture data will heavily depend upon which depth standard is used during the experiments. Our results illustrate the importance of understanding the biological context of the question being addressed when designing comparative experiments.

The effects of soft and rough substrates on suction-based adhesion

The Northern clingfish (Gobiesox maeandricus) has a suction-based adhesive disc that can stick to incredibly rough surfaces, a challenge for stiff commercial suction cups. Both clingfish discs and bioinspired suction cups have stiff cores but flexible edges that can deform to overcome surface irregularities. Compliant surfaces are common in nature and technical settings, but performance data for fish and commercial cups is gathered from stiff surfaces. We quantified the interaction between substrate compliance, surface roughness, and suction performance for the Northern clingfish, commercial suction cups, and three biomimetic suction cups with disc rims of varying compliance. We found that all cups stick better on stiffer substrates and worse on more compliant ones, as indicated by peak stress values. On compliant substrates, surface roughness had little effect on adhesion, even for commercial cups that normally fail on hard, rough surfaces. We propose that suction performance on compliant substrates can be explained in part by effective elastic modulus, the combined elastic modulus from a cup-substrate interaction. Of all the tested cups, the biomimetic cups performed the best on compliant surfaces, highlighting their potential to be used in medical and marine geotechnical fields. Lastly, we discuss the overmolding technique used to generate the bioinspired cups and how it is an important tool for studying biology.

To Mimic Mechanical Properties of the Skin by Inducing Oriented Nanofiber Microstructures in Bottlebrush Cellulose-graft-diblock Copolymer Elastomers

Skin is a vital biological defense system that protects the body from physical harm with its unique mechanical properties attributed to the hierarchical organization of the protein scaffold. Developing a synthetic skinlike material has aroused great interest; however, replication of the skin's mechanical response, including anisotropic softness and strain-stiffening, is difficult to achieve. Here, to mimic the mechanical behaviors of skin, a reprocessable bottlebrush copolymer elastomer was designed with renewable and rigid cellulose as backbones; meanwhile, poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PBA-b-PMMA) diblocks were designed as the grafted side chains. The so-made elastomers were subjected to a step-cyclic tensile deformation, by which the internal structures became oriented nanofibers and endowed stress-strain behaviors pretty much similar to those of the real skin. Overall, our research work currently undertaken would be of great importance in the development of a series of biomimetic skinlike polymer materials.

Comparative biomechanics of hagfish skins: diversity in material, morphology, and movement

The baggy skins of hagfishes confer whole-body flexibility that enables these animals to tie themselves into knots without injury. The skin's looseness is produced by a subcutaneous blood sinus that decouples the skin and body core and permits the core to contort dramatically without loading the skin in tension or shear. Hagfish skin represents a biological composite material comparable in strength and stiffness to the conventionally taut skins of other fishes. However, our understanding of hagfish skin is restricted to only one of 78 species: The Pacific hagfish Eptatretus stoutii. To determine if other hagfish share similar characteristics with E. stoutii, we measured material properties and compared histological data sets from the skins of four hagfish species: E. springeri, E. stoutii, Myxine glutinosa, and M. hubbsi. We also compared these material properties data with skins from the American eel, Anguilla rostrata. We subjected skin samples from all species to uniaxial tensile tests in order to measure strength, stiffness, extensibility, and toughness of skins stretched along longitudinal and circumferential axes. We also used a series of equibiaxial tensile tests on skin samples from E. stoutii, M. glutinosa, and A. rostrata to measure stiffness of skins simultaneously strained along both axes. Significant results of uniaxial and biaxial tests show that the skins from Eptatretus are anisotropic, being stiffer in the longitudinal axis, and more extensible than the isotropic skins of Myxine. Skins of A. rostrata were stiffer in the circumferential axis and they were stronger, tougher, and stiffer than all hagfish skins examined. The skins of Eptatretus are histologically distinct from Myxine skins and possess arrays of fibers that stain like muscle. These interspecific differences across hagfish skins show a phylogenetic pattern with knotting kinematics and flexibility; both genera belong to distinct but major subfamilies within the Myxinidae, and Eptatretus is known for creating and manipulating a greater diversity of knotting styles than Myxine.

Potential Environmental Effects of Marine Renewable Energy Development—The State of the Science

Marine renewable energy (MRE) harnesses energy from the ocean and provides a low-carbon sustainable energy source for national grids and remote uses. The international MRE industry is in the early stages of development, focused largely on tidal and riverine turbines, and wave energy converters (WECs), to harness energy from tides, rivers, and waves, respectively. Although MRE supports climate change mitigation, there are concerns that MRE devices and systems could affect portions of the marine and river environments. The greatest concern for tidal and river turbines is the potential for animals to be injured or killed by collision with rotating blades. Other risks associated with MRE device operation include the potential for turbines and WECs to cause disruption from underwater noise emissions, generation of electromagnetic fields, changes in benthic and pelagic habitats, changes in oceanographic processes, and entanglement of large marine animals. The accumulated knowledge of interactions of MRE devices with animals and habitats to date is summarized here, along with a discussion of preferred management methods for encouraging MRE development in an environmentally responsible manner. As there are few devices in the water, understanding is gained largely from examining one to three MRE devices. This information indicates that there will be no significant effects on marine animals and habitats due to underwater noise from MRE devices or emissions of electromagnetic fields from cables, nor changes in benthic and pelagic habitats, or oceanographic systems. Ongoing research to understand potential collision risk of animals with turbine blades still shows significant uncertainty. There has been no significant field research undertaken on entanglement of large animals with mooring lines and cables associated with MRE devices.

Assessing harbour porpoise carcasses potentially subjected to grey seal predation

As a follow-up on the data presented for seals, we herein report and discuss outcomes resulting from a retrospective evaluation of harbour porpoise stranding and necropsy data from Schleswig-Holstein, Germany (n = 4463) to enable an objective evaluation of potential ecological effects of grey seal predation on porpoises. Results are compared to a recent case of definite grey seal predation as well as to reports from other countries. Porpoise carcasses potentially subject to grey seal predation show severe lacerations, with large parts of skin and underlying tissue being detached from the body. Loss of blubber tissue is common. Based on the occurrence frequencies of encountered lesions, a list of parameters as well as a complementary decision tree are suggested to be used for future assessments. The results shown add to an increasingly standardised assessment protocol of suspected grey seal predation cases making respective results comparable between different areas and countries. The usage of a standardised protocol may increase the awareness of grey seal predation and the reporting of such cases. By this, differences in the predation and feeding patterns as well as the potential ecological relevance of this behaviour may be elucidated.

Making a point: shared mechanics underlying the diversity of biological puncture

A viper injecting venom into a target, a mantis shrimp harpooning a fish, a cactus dispersing itself via spines attaching to passing mammals; all these are examples of biological puncture. Although disparate in terms of materials, kinematics and phylogeny, all three examples must adhere to the same set of fundamental physical laws that govern puncture mechanics. The diversity of biological puncture systems is a good case study for how physical laws can be used as a baseline for comparing disparate biological systems. In this Review, I explore the diversity of biological puncture and identify key variables that influence these systems. First, I explore recent work on biological puncture in a diversity of organisms, based on their hypothesized objectives: gripping, injection, damage and defence. Variation within each category is discussed, such as the differences between gripping for prey capture, gripping for dispersal of materials or gripping during reproduction. The second half of the Review is focused on specific physical parameters that influence puncture mechanics, such as material properties, stress, energy, speed and the medium within which puncture occurs. I focus on how these parameters have been examined in biology, and how they influence the evolution of biological systems. The ultimate objective of this Review is to outline an initial framework for examining the mechanics and evolution of puncture systems across biology. This framework will not only allow for broad biological comparisons, but also create a baseline for bioinspired design of both tools that puncture efficiently and materials that can resist puncture.