Integrated-circuit bio-calorimetric sensor for glucose

Carbon Nanotube Fiber-Based Flexible Microelectrode for Electrochemical Glucose Sensors

Electrochemical sensors are gaining significant demand for real-time monitoring of health-related parameters such as temperature, heart rate, and blood glucose level. A fiber-like microelectrode composed of copper oxide-modified carbon nanotubes (CuO@CNTFs) has been developed as a flexible and wearable glucose sensor with remarkable catalytic activity. The unidimensional structure of CNT fibers displayed efficient conductivity with enhanced mechanical strength, which makes these fibers far superior as compared to other fibrous-like materials. Copper oxide (CuO) nanoparticles were deposited over the surface of CNT fibers by a binder-free facile electrodeposition approach followed by thermal treatment that enhanced the performance of non-enzymatic glucose sensors. Scanning electron microscopy and energy-dispersive X-ray analysis confirmed the successful deposition of CuO nanoparticles over the fiber surface. Amperometric and voltammetric studies of fiber-based microelectrodes (CuO@CNTFs) toward glucose sensing showed an excellent sensitivity of ∼3000 μA/mM cm², a low detection limit of 1.4 μM, and a wide linear range of up to 13 mM. The superior performance of the microelectrode is attributed to the synergistic effect of the electrocatalytic activity of CuO nanoparticles and the excellent conductivity of CNT fibers. A lower charge transfer resistance value obtained via electrochemical impedance spectroscopy (EIS) also demonstrated the superior electrode performance. This work demonstrates a facile approach for developing CNT fiber-based microelectrodes as a promising solution for flexible and disposable non-enzymatic glucose sensors.

Principles of enzyme thermistor systems: applications to biomedical and other measurements

This chapter presents an overview of thermistor-based calorimetric measurements. Bioanalytical applications are emphasized from both the chemical and biomedical points of view. The introductory section elucidates the principles involved in the thermometric measurements. The following section describes in detail the evolution of the various versions of enzyme-thermistor devices. Special emphasis is laid on the description of modern "mini" and "miniaturized" versions of enzyme thermistors. Hybrid devices are also introduced in this section. In the sections on applications, the clinical/biomedical areas are dealt with separately, followed by other applications. Mention is also made of miscellaneous applications. A special section is devoted to future developments, wherein novel concepts of telemedicine and home diagnostics are highlighted. The role of communication and information technology in telemedicine is also mentioned. In the concluding sections, an attempt is made to incorporate the most recent references on specific topics based on enzyme-thermistor systems.

Flow injection analysis and biosensors: Applications for biotechnology and environmental control

Our experience in industrial bioprocess monitoring and environmental control let us develop a concept for biosensor research which distinguishes itself from other, more popular, approaches. Biosensors must improve and/or simplify existing state-of-the-art analysis systems. Only the parallel development of biosensors and their complementary metrology leads to industrially sound solutions. The combination of flow injection analysis with immobilized enzymes in the form of enzyme columns is already used today for the solution of on-line analytical problems in bioprocesses and environmental control.

Optimization of a polypyrrole glucose oxidase biosensor

An amperometric glucose biosensor was fabricated by the electrochemical polymerization of pyrrole onto a platinum electrode in the presence of the enzyme glucose oxidase in a KCl solution at a potential of +0.65 V versus SCE. The enzyme was entrapped into the polypyrrole film during the electropolymerization process. Glucose responses were measured by potentiostating the enzyme electrode at a potential of +0.7 V versus SCE in order to oxidize the hydrogen generated by the oxidation of glucose by the enzyme in the presence of oxygen. Experiments were performed to determine the optimal conditions of the polypyrrole glucose oxidase film preparation (pyrrole and glucose oxidase concentrations in the plating solution) and the response to glucose from such electrodes was evaluated as a function of film thickness, pH and temperature. It was found that a concentration of 0.3 M pyrrole in the presence of 65 U/ml of glucose oxidase in 0.01 M KCl were the optimal parameters for the fabrication of the biosensor. The optimal response was obtained for a film thickness of 0.17 microns (75 mC/cm2) at pH 6 and at a temperature of 313 K. The temperature dependence of the amperometric response indicated an activation energy of 41 kJ/mole. The linearity of the enzyme electrode response ranged from 1.0 mM to 7.5 mM glucose and kinetic parameters determined for the optimized biosensors were 33.4 mM for the Km and 7.2 microA for the Imax. It was demonstrated that the internal diffusion of hydrogen peroxide through the polypyrrole layer to the platinum surface was the main limiting factor controlling the magnitude of the response of the biosensor to glucose. The response was directly related to the enzyme loading in the polypyrrole film. The shelf life and the operational stability of the optimized biosensor exceed 500 days and 175 assays, respectively. The substrate specificity of the entrapped glucose oxidase was not altered by the immobilization procedure.