Improvement in signal reliability when measuring l-glutamate released from cultured cells using multi-channel microfabricated sensors

Recent development of carbon electrode materials and their bioanalytical and environmental applications

New synthetic approaches, materials, properties, electroanalytical applications and perspectives of carbon materials are presented.

Nanowire Modification to Enhance the Performance of Neurotransmitter Sensors

In this work, we have developed a method to modify the platinum (Pt) working electrode with nanowires using vapor-solid-liquid (VLS) mechanism in order to increase the sensitivity of our microelectrochemical neurotransmitter sensors. Our sensor probes were manufactured from a 300 μm thick silicon (Si) wafer with several electrode designs for implantation in various locations of the human central nervous system. The surfaces of electrodes were observed and characterized by scanning electron microscopy (SEM) and cyclic voltammetry (CV). The complete devices were made and used to demonstrate the enhancement in performance contributed by nanowires in the enzyme-based electrochemical sensing of L-glutamate, which is the most abundant excitatory neurotransmitter. Comparison between electrodes with and without nanowire modification was conducted, showing that the modification method is a good option to improve the performance of electrochemical sensors.

l-Glutamate biosensor for estimation of the taste of tomato specimens

An amperometric biosensor has been developed for measurement of Umami, or the taste based on the amount of L-glutamate, in tomato foods. The biosensor is based on an enzyme-mediator system in which L-glutamate oxidase is used for biochemical oxidation of L-glutamate and a tetrafulvalene-tetracyanoquinodimethane (TTF-TCNQ) paste, prepared from the mixture of TTF-TCNQ salt, graphite powder, and silicone oil, serves as the mediator. The limit of detection, calculated by use of a four-parameter logistic model, was 0.05 mmol L(-1), and the limit of quantification was 0.15 mmol L(-1). The correlation coefficient (R2) was 0.990 and the relative standard deviation was no more than 1% (n=5). The response time (tau (95)) was 20-50 s, depending on concentration. The repeatability of the sensor was better than 5% (n=10). The sensor developed was stable for more than ten days.

Glutamate detection from nerve cells using a planar electrodes array integrated in a microtiter plate

There is an increasing interest in new strategies for replacing animal tests in research. The use of cell cultures and integrated electrodes is seen as a promising alternative that could potentially solve this problem. In this work, we present a L-glutamate sensor based on a bienzyme redox hydrogel, capable of detecting the release of this excitatory neurotransmitter from adherently growing cells upon stimulation. The low working potential required for the operation of the sensor decreases the possibility of interference by easily oxidizable compounds always present in complex biological samples. A low detection limit of 0.5 microM L-glutamate, a response time of about 35 s, and a linear range of up to 60 microM are the main characteristics of the sensor. The system has been successfully employed to monitor the release of l-glutamate from HN10 and C6 cells upon stimulation with K(+)-ions. The developed integrated electrochemical platform will be used in future for drug screening and potentially for replacing animal models in neurological experiments.

Selective detection of L-glutamate using a microfluidic device integrated with an enzyme-modified pre-reactor and an electrochemical detector

A microfluidic device integrated with a nanoliter volume enzyme pre-reactor and an enzyme-modified electrode was developed for the highly selective continuous measurement of glutamate (Glu). The device consists mainly of two glass plates. One plate incorporates an electrochemical cell that consists of working electrode (WE), reference electrode (RE) and counter electrode (CE). The WE is modified with a bilayer film of Os-polyvinylpyrridine-based mediator containing horseradish peroxidase (Os-gel-HRP). The WE was operated at -50 mV versus Ag. The other plate has a thin layer flow channel integrated with a pre-reactor. The reactor has a number of micropillars (20 microm in diameter, 20 microm high and separated from each other by a 20 microm gap) modified with ascorbate oxidase (AAOx) to eliminate L-ascorbic acid (AA). The enzymatic oxidation of AA is superior to that obtained with our previously reported pre-electrolysis type micro-reactor since electrochemically reversible transmitters such as catecholamines do not provide a cathodic current at the WE. In addition, the high operation potential of the pre-reactor causes unknown electroactive species, which also cause interference at the detection electrode. As a result, we were able to detect 1 microM Glu continuously at a low flow rate even when AA concentration was 100 microM.

Horseradish peroxidase: a valuable tool in biotechnology

Peroxidases have conquered a prominent position in biotechnology and associated research areas (enzymology, biochemistry, medicine, genetics, physiology, histo- and cytochemistry). They are one of the most extensively studied groups of enzymes and the literature is rich in research papers dating back from the 19th century. Nevertheless, peroxidases continue to be widely studied, with more than 2000 articles already published in 2002 (according to the Institute for Scientific Information). The importance of peroxidases is emphasised by their wide distribution among living organisms and by their multiple physiological roles. They have been divided into three superfamilies according to their source and mode of action: plant peroxidases, animal peroxidases and catalases. Among all peroxidases, horseradish peroxidase (HRP) has received a special attention and will be the focus of this review. A brief description of the three super-families is included in the first section of this review. In the second section, a comprehensive description of the present state of knowledge of the structure and catalytic action of HRP is presented. The physiological role of peroxidases in higher plants is described in the third section. And finally, the fourth section addresses the applications of peroxidases, especially HRP, in the environmental and health care sectors, and in the pharmaceutical, chemical and biotechnological industries.

Continuous Measurement of Glutamate and Hydrogen Peroxide Using a Microfabricated Biosensor for Studying the Neurotoxicity of Tributyltin

We first measured the effects of trace levels of an endocrine disruptor, tributyltin (TBT), on the secretion response from nerve cells using a microfabricated biosensor designed for the continuous measurement of L-glutamate and hydrogen peroxide. We observed higher and long-lasting glutamate and hydrogen peroxide concentrations from the cells when cultured rat cortical neurons were exposed to TBT. Glutamate and hydrogen peroxide release was induced even when we reduced the TBT concentration to 10 nM. This concentration is about two orders of magnitude lower than the concentration that induced apoptosis-like cell death. We also report on the effects of NMDA and non-NMDA receptor antagonists, which can help us to understand the mechanism of TBT neurotoxicity.