Hydrogen peroxide biosensor with enzyme entrapped within electrodeposited polypyrrole based on mediated sol–gel derived composite carbon electrode

Construction and Characterization of a Chitosan-Immobilized-Enzyme and β-Cyclodextrin-Included-Ferrocene-Based Electrochemical Biosensor for H₂O₂ Detection

An electrochemical detection biosensor was prepared with the chitosan-immobilized-enzyme (CTS-CAT) and β-cyclodextrin-included-ferrocene (β-CD-FE) complex for the determination of H₂O₂. Ferrocene (FE) was included in β-cyclodextrin (β-CD) to increase its stability. The structure of the β-CD-FE was characterized. The inclusion amount, inclusion rate, and electrochemical properties of inclusion complexes were determined to optimize the reaction conditions for the inclusion. CTS-CAT was prepared by a step-by-step immobilization method, which overcame the disadvantages of the conventional preparation methods. The immobilization conditions were optimized to obtain the desired enzyme activity. CTS-CAT/β-CD-FE composite electrodes were prepared by compositing the CTS-CAT with the β-CD-FE complex on a glassy carbon electrode and used for the electrochemical detection of H₂O₂. It was found that the CTS-CAT could produce a strong reduction peak current in response to H₂O₂ and the β-CD-FE could amplify the current signal. The peak current exhibited a linear relationship with the H₂O₂ concentration in the range of 1.0 × 10^-7-6.0 × 10^-3 mol/L. Our work provided a novel method for the construction of electrochemical biosensors with a fast response, good stability, high sensitivity, and a wide linear response range based on the composite of chitosan and cyclodextrin.

High-bright fluorescent carbon dot as versatile sensing platform

The surface functionalization will introduce additional functional groups on carbon dots (CDs) surface and then enrich the properties of CDs. Here, we show the various surface functionalized CDs (-COOH, -OH, -SH, -NH₂, etc, named as NS-CDs) were synthesized with fascinating features, including high quantum efficiency (38.9%), long-term stability and good biocompatibility. Notably, it can serve as multifunction fluorescent probe in sensing system, including label-free detections in hydrogen peroxide (H₂O₂) with a wide linear range (1.20 × 10^-3 - 8.80 × 10^-12M) and a low limit of detection (LOD, 1.00 × 10^-12M); and glutathione, covering a concentration range of 2.00 × 10^-3 - 1.00 × 10^-7M and LOD of 1.00 × 10^-7M. In addition, the NS-CDs as fluorescent probe could selectively detect metal ions (such as, Hg²⁺, 1.00 × 10^-8 - 1.50 × 10^-3M, 1.00 × 10^-7M), antibiotics (tetracycline, 1.00 ×10^-10 - 2.50 × 10^-5M, 1.00 ×10^-10M) and toxic pollutant (nitrobenzene, 5.00 × 10^-7 to 1.00 × 10^-3gL^-1, 5.00 × 10^-7gL^-1) with wide linear range and satisfactory detection limits.

A Urea Potentiometric Biosensor Based on a Thiophene Copolymer

A potentiometric enzyme biosensor is a convenient detector for quantification of urea concentrations in industrial processes, or for monitoring patients with diabetes, kidney damage or liver malfunction. In this work, poly(3-hexylthiophene-co-3-thiopheneacetic acid) (P(3HT-co-3TAA)) was chemically synthesized, characterized and spin-coated onto conductive indium tin oxide (ITO) glass electrodes. Urease (Urs) was covalently attached to the smooth surface of this copolymer via carbodiimide coupling. The electrochemical behavior and stability of the modified Urs/P(3HT-co-3TAA)/ITO glass electrode were investigated by cyclic voltammetry, and the bound enzyme activity was confirmed by spectrophotometry. Potentiometric response studies indicated that this electrode could determine the concentration of urea in aqueous solutions, with a quasi-Nernstian response up to about 5 mM. No attempt was made to optimize the response speed; full equilibration occurred after 10 min, but the half-time for response was typically <1 min.

Detection of hydrogen peroxide in Photosystem II (PSII) using catalytic amperometric biosensor

Hydrogen peroxide (H2O2) is known to be generated in Photosystem II (PSII) via enzymatic and non-enzymatic pathways. Detection of H2O2 by different spectroscopic techniques has been explored, however its sensitive detection has always been a challenge in photosynthetic research. During the recent past, fluorescence probes such as Amplex Red (AR) has been used but is known to either lack specificity or limitation with respect to the minimum detection limit of H2O2. We have employed an electrochemical biosensor for real time monitoring of H2O2 generation at the level of sub-cellular organelles. The electrochemical biosensor comprises of counter electrode and working electrodes. The counter electrode is a platinum plate, while the working electrode is a mediator based catalytic amperometric biosensor device developed by the coating of a carbon electrode with osmium-horseradish peroxidase which acts as H2O2 detection sensor. In the current study, generation and kinetic behavior of H2O2 in PSII membranes have been studied under light illumination. Electrochemical detection of H2O2 using the catalytic amperometric biosensor device is claimed to serve as a promising technique for detection of H2O2 in photosynthetic cells and subcellular structures including PSII or thylakoid membranes. It can also provide a precise information on qualitative determination of H2O2 and thus can be widely used in photosynthetic research.

Prospects of Organic Conducting Polymer Modified Electrodes: Enzymosensors

Organic conducting polymer modified electrodes (OCPMEs) have emerged as potential candidates for electrochemical biosensors due to their easy preparation methods along with unique properties, like stability in air and being compatible with biological molecules in a neutral aqueous solution. OCPMEs are playing an important role in the improvement of public health and environment for the detection of desired analytes with high sensitivity and specificity. In this paper, we highlight the prospects of OCMEs-based electrochemical enzymosensors.

Electrochemical Sensors Based on Organic Conjugated Polymers

Organic conjugated polymers (conducting polymers) have emerged as potentialcandidates for electrochemical sensors. Due to their straightforward preparation methods,unique properties, and stability in air, conducting polymers have been applied to energystorage, electrochemical devices, memory devices, chemical sensors, and electrocatalysts.Conducting polymers are also known to be compatible with biological molecules in aneutral aqueous solution. Thus, these are extensively used in the fabrication of accurate,fast, and inexpensive devices, such as biosensors and chemical sensors in the medicaldiagnostic laboratories. Conducting polymer-based electrochemical sensors and biosensorsplay an important role in the improvement of public health and environment because rapiddetection, high sensitivity, small size, and specificity are achievable for environmentalmonitoring and clinical diagnostics. In this review, we summarized the recent advances inconducting polymer-based electrochemical sensors, which covers chemical sensors(potentiometric, voltammetric, amperometric) and biosensors (enzyme based biosensors,immunosensors, DNA sensors).

Prospects of conducting polymers in biosensors

Applications of conducting polymers to biosensors have recently aroused much interest. This is because these molecular electronic materials offer control of different parameters such as polymer layer thickness, electrical properties and bio-reagent loading, etc. Moreover, conducting polymer based biosensors are likely to cater to the pressing requirements such as biocompatibility, possibility of in vivo sensing, continuous monitoring of drugs or metabolites, multi-parametric assays, miniaturization and high information density. This paper deals with the emerging trends in conducting polymer based biosensors during the last about 5 years.

Detection of V-type nerve agent degradation products at electrodes modified by PPy/PQQ using CaCl2 as supporting electrolyte

Electrochemical detection without derivatization was used to detect thiol-containing degradation products of V-type nerve agents. Electropolymerization of pyrrole was used for entrapment of the biocatalyst PQQ to produce a sensor. Various parameters which affect the detection processes such as the type of the supporting electrolyte used during electrodeposition and the thickness of the polypyrrole film were examined and optimized. Electocatalytic oxidation of thiols by the PPy/PQQ electrode was strongly affected by the presence of Ca2+ cations during electrodeposition of the PPy/PQQ. Cyclic voltammetry, linear sweep voltammetry and amperometry have been used for electrode characterization. Amperometric detection of the V-type nerve agent thiol degradation products 2-(dimethylamino)ethanethiol (DMAET) and 2-(diethylamino)ethanethiol (DEAET) was performed at 0.38 V. Linear calibration plots were observed for these compounds. The detection limits of 4.5 and 3 microM were obtained for DMAET and DEAET respectively, with sensitivities of 1.18 and 1.37 nA microM(-1) cm(-2).