Selectrode—the universal ion-selective electrode

Reliable environmental trace heavy metal analysis with potentiometric ion sensors - reality or a distant dream

Over two decades have passed since polymeric membrane ion-selective electrodes were found to exhibit sufficiently lower detection limits. This in turn brought a great promise to measure trace level concentrations of heavy metals using potentiometric ion sensors at environmental conditions. Despite great efforts, trace analysis of heavy metals using ion-selective electrodes at environmental conditions is still not commercially available. This work will predominantly concentrate on summarizing and evaluating prospects of using potentiometric ion sensors in view of environmental determination of heavy metals in on-site and on-line analysis modes. Challenges associated with development of reliable potentiometric sensors to be operational in environmental conditions will be discussed and reasoning behind unsuccessful efforts to develop potentiometric on-site and on-line environmental ion sensors will be explored. In short, it is now clear that solely lowering the detection limit of the ion-selective electrodes does not guarantee development of successful sensors that would meet the requirement of environmental matrices over long term usage. More pressing challenges of the properties and the performance of the potentiometric sensors must be addressed first before considering extending their sensitivity to low analyte concentrations. These are, in order of importance, selectivity of the ion-selective membrane to main ion followed by the membrane resistance to parallel processes, such as water ingress to the ISM, light sensitivity, change in temperature, presence of gasses in solution and pH and finally resistance of the ion-selective membrane to fouling. In the future, targeted on-site and on-line environmental sensors should be developed, addressing specific environmental conditions. Thus, ion-selective electrodes should be developed with the intention to be suitable to the operational environmental conditions, rather than looking at universal sensor design validated in the idealized and simple sample matrices.

Performance evaluation criteria for preparation and measurement of macro- and microfabricated ion-selective electrodes (IUPAC Technical Report)

Over the last 30 years, IUPAC published several documents with the goal of achieving standardized nomenclature and methodology for potentiometric ion-selective electrodes (ISEs). The ISE vocabulary was formulated, measurement protocols were suggested, and the selectivity coefficients were compiled. However, in light of new discoveries and experimental possibilities in the field of ISEs, some of the IUPAC recommendations have become outdated. The goal of this technical report is to direct attention to ISE practices and the striking need for updated or refined IUPAC recommendations which are consistent with the state of the art of using macro- and microfabricated planar microelectrodes. Some of these ISE practices have never been addressed by IUPAC but have gained importance with the technological and theoretical developments of recent years. In spite of its recognized importance, a generally acceptable revision of the current IUPAC recommendations is far beyond the scope of this work.

Organic and inorganic lead inhibit neurite growth in vertebrate and invertebrate neurons in culture

Neurons from brains of chick embryos and pond snails (Lymnaea stagnalis) were cultured for 3 to 4 d in the presence of no toxins, inorganic lead (PbCl2), or organic lead (triethyl lead chloride). In chick neurons, inorganic lead reduced the percentage of cells that grew neurites (IC50 = 270 microM total lead, approximately 70 nM free Pb2+) but did not reduce the number of neurites per cell or the mean neurite length. Triethyl lead reduced the percentage of cells that grew neurites (IC50 = 0.24 microM) and the mean neurite length (extrapolated IC50 = 3.6 microM) but did not reduce the number of neurites per cell. In Lymnaea neurons, inorganic lead reduced the percentage of cells that grew neurites (IC50 = 13 microM total lead; approximately 10 nM free Pb2+). Triethyl lead reduced the percentage of cells that grew neurites (IC50 = 0.4 microM) and exerted significant toxicity at 0.2 microM. The two forms of lead affected neurite growth in qualitatively different ways, which suggests that their mechanisms of action are different.