Optimisation of thermal lens microscopic measurements in a microchip

Accuracy of Measurements of Thermophysical Parameters by Dual-Beam Thermal-Lens Spectrometry

Thermal-lens spectrometry is a sensitive technique for determination of physicochemical properties and thermophysical parameters of various materials including heterogeneous systems and nanoparticles. In this paper, we consider the issues of the correctness (trueness) of measurements of the characteristic time of the thermal-lens effect and, thus, of the thermal diffusivity determined by dual-beam mode-mismatching thermal lensing. As sources of systematic errors, major factors-radiation sources, sample-cell and detector parameters, and general measurement parameters-are considered using several configurations of the thermal-lens setups, and their contributions are quantified or estimated. Furthermore, with aqueous ferroin and Sudan I in ethanol as inert colorants, the effects of the intermolecular distance of the absorbing substance on the correctness of finding the thermophysical parameters are considered. The recommendations for checking the operation of the thermal-lens setup to ensure the maximum accuracy are given. The results obtained help reducing the impact of each investigated factor on the value of systematic error and correctly measure the thermophysical parameters using thermal-lens spectrometry.

Support vector machine firefly algorithm based optimization of lens system

Lens system design is an important factor in image quality. The main aspect of the lens system design methodology is the optimization procedure. Since optimization is a complex, nonlinear task, soft computing optimization algorithms can be used. There are many tools that can be employed to measure optical performance, but the spot diagram is the most useful. The spot diagram gives an indication of the image of a point object. In this paper, the spot size radius is considered an optimization criterion. Intelligent soft computing scheme support vector machines (SVMs) coupled with the firefly algorithm (FFA) are implemented. The performance of the proposed estimators is confirmed with the simulation results. The result of the proposed SVM-FFA model has been compared with support vector regression (SVR), artificial neural networks, and generic programming methods. The results show that the SVM-FFA model performs more accurately than the other methodologies. Therefore, SVM-FFA can be used as an efficient soft computing technique in the optimization of lens system designs.

Thermooptical detection in microchips: from macro- to micro-scale with enhanced analytical parameters

In this paper, we compared the methods of photothermal spectroscopy used in different spatial scales, namely thermal-lens spectrometry (TLS) and thermal-lens microscopy (TLM) to enhance the performance parameters in analytical procedures. All of the experimental results were confirmed by theoretical calculation. It was proven that the design for both TLM and TLS, despite a different scale for the effect, is governed by the same signal-generating and probing conditions (probe beam diameter at the sample should be equal to the diameter of the blooming thermal lens), and almost does not depend on the nature of the solvent. Theoretical and experimental instrumental error curves for thermal lensing were coincident. TLM obeys the same law of instrumental error as TLS and shows better repeatability for the same levels of thermal-lens signals or absorbances. TLS is more advantageous for studying low concentrations in bulk, while TLM shows much lower absolute LODs due to better repeatability for low amounts. The behavior of the thermal-lens signal with different flow rates was studied and optimum conditions, with the minimum contribution to total error, were found. These conditions are reproducible, are in agreement with the existing theory of the thermal response in thermal lensing, and do not significantly affect the design of the optimum scheme for setups. TLM showed low LODs in solvent extraction (down to 10(-8) M) and electrokinetic separation (10(-7) M), which were shown to be governed by discussed instrumental regularities, instead of by microchemistry.

Simultaneous coaxial thermal lens spectroscopy and retro-reflected beam interference detection for capillary electrophoresis

A novel optical scheme, which accomplished simultaneous coaxial thermal lens spectroscopy and retro-reflected beam interference detection for capillary electrophoresis, has been described. By a special design, an adjustable pump laser waist relative to the probe laser waist was implemented, while some key elements for both detection modes were optimized. In either detection modes, certain preponderance compared with former reports was indicated. With both coaxial thermal lens spectroscopy and retro-reflected beam interference detection, the reported detection scheme combined high sensitivity and universal property for capillary electrophoresis detection.

Mode-mismatched dual-beam differential thermal lensing with optical scheme design optimized using expert estimation for analytical measurements

The optimization of the optical scheme design of a mode-mismatched dual-beam thermal-lens spectrometer for differential (dual-cell) measurements in a far-field mode using diffraction thermal-lens theory is carried out. A criterion for an expert estimation of the quality of the spectrometer design for differential thermal-lens measurements in analytical chemistry (sensitivity, low limits of detection, and quantification) is also developed. The theoretical calculations agree well with previous papers on differential thermal lensing. Using the example of iron(II) tris-(1,10-phenanthrolinate), it is shown that the blank signal compensation in differential thermal lens spectrometry provides a decrease in the limit of detection by an order of magnitude compared to the decrease in single-cell measurements. Using an artificial two-component mixture of ferroin and potassium dichromate, it is shown that dual-beam differential thermal lens spectrometry makes it possible to determine trace components against 900-fold excess amounts of interfering substances.

Development of an osteoblast-based 3D continuous-perfusion microfluidic system for drug screening

In this work, we demonstrated that biological cells could be cultured in a continuous-perfusion glass microchip system for drug screening. We used mouse Col1a1GFP MC-3T3 E1 osteoblastic cells, which have a marker gene system expressing green fluorescent protein (GFP) under the control of osteoblast-specific promoters. With our microchip-based cell culture system, we realized automated long-term monitoring of cells and sampling of the culture supernatant system for osteoblast differentiation assay using a small number of cells. The system successfully monitored cells for 10 days. Under the 3D microchannel condition, shear stress (0.07 dyne/cm(2) at a flow rate of 0.2 microL/min) was applied to the cells and it enhanced the GFP expression and differentiation of the osteoblasts. Analysis of alkaline phosphatase (ALP), which is an enzyme marker of osteoblasts, supported the results of GFP expression. In the case of differentiation medium containing bone morphogenetic protein 2, we found that ALP activity in the culture supernatant was enhanced 10 times in the microchannel compared with the static condition in 48-well dishes. A combined system of a microchip and a cell-based sensor might allow us to monitor osteogenic differentiation easily, precisely, and noninvasively. Our system can be applied in high-throughput drug screening assay for discovering osteogenic compounds.

Optimization of instrumental parameters of a near-field thermal-lens detector for capillary electrophoresis

The optical scheme of a near-field dual-beam mode-mismatched thermal-lens detector for capillary electrophoresis with a crossed-beam configuration employing a multimode HeCd laser (325 nm) as an excitation source was optimized. It is shown that a multimode laser can be successfully used as an excitation source in thermal lensing with minimal deviations in thermal responses from Gaussian excitation sources. An equation for diffraction thermal-lens theory for near-field measurements is deduced, and the experimental results agree with the deduced equation. The temperature rise in the capillary was estimated, and the exponential decrease of the signal with time for static conditions and low flow velocities was explained. The optimum configuration of the detector from the viewpoint of the maximum sensitivity and beam sizes was found. The detector provides a significant improvement in the detection limits for model compounds absorbing at 325 nm (nitrophenols) compared to the results obtained with a commercial absorbance detector operating at the same wavelength.

Signal optimisation in cw-laser crossed-beam photothermal spectrometry: influence of the chopping frequency, sample size and flow rate

Optimisation of the optical design for cw-laser crossed-beam thermal lens spectrometry in infinite and finite samples has been investigated using different excitation beam waists and various lens combinations. The characteristics of the photothermal signal depending on the position of the sample with respect to the probe beam waist, the chopping frequency, the sample size and the flow rate have been considered. Depending on the irradiation duration, the size of the thermal element at the measurement time can be much greater than the waist of the excitation beam. As a result, the optimum sample position is closely related to the probe beam to thermal element size ratio and therefore depends on the chopping frequency and of the sample size. At low frequencies, the size of the thermal element is almost independent of the degree of focusing of the excitation beam because a smaller beam waist induces a faster thermal expansion. As a result, the amplitude of the optimum signal does not depend on the waist of the excitation beam. In contrast, at high frequency, the size of the thermal element remains closer to the size of the excitation beam and the signal is inversely proportional to the waist of the excitation beam as previously demonstrated under pulsed-laser excitation. Moreover, at moderate flow velocities, the signal is significantly enhanced because the negative effect produced by the displacement of the thermal element across the probe beam axis is more than compensated by a decrease of the effective thermal time constant due to radial mixing.

Thermal Lens Micro Optical Systems

This paper describes two types of miniaturized thermal lens optical systems that use optical fibers, SELFOC microlenses and light sources. The first system consists of a compact diode pumped solid-state laser (532 nm) as an excitation light source, a laser diode (635 nm) as a probe light source, an acoustoptic modulator as an excitation light modulator, fiber-based and conventional optics, and a detection system that combines a pinhole, an interference filter, and a photodiode. The second system consists of two laser diodes as the excitation (658 nm) and probe (780 nm) light sources, fiber-based optics, and the same detection system as the first one. The performance of the two systems was evaluated by the limit of detection (LOD) using standard solutions of sunset yellow (SY) and nickel(II) phthalocyaninetetrasulfonic acid tetrasodium salt (NiP). The LODs of the first system for SY and second system for NiP were calculated to be 3.7 x 10(-8) (1.7 x 10(-6) AU) and 7.7 x 10(-9) M (3.4 x10(-6) AU), respectively. These results were consistent with the expected values obtained from photothermal parameters.

Photothermal spectrometry for detection in miniaturized systems: relevant features, strategies and recent applications

There is a growing interest in using miniaturized analytical devices because they allow to execute the different steps of an analytical process within very short times and with drastic reduction in the amounts of solvents, reagents and samples. As for capillary electrophoresis, these systems require detectors which are sensitive, versatile and adaptable to very small detection volumes. In this respect, photothermal spectrometry which is complementary to fluorescence seems to be a promising detection method. This review describes the basic principle of photothermal spectrometry along with the related methods based on colinear-beam or crossed-beam configuration of the pump and probe lasers. Two experimental set ups especially designed for microfluidic systems as well as for capillary electrophoresis are described. Their characteristics and key features are discussed and the main applications are outlined.

Pulsed-laser crossed-beam thermal lens spectrometry for detection in a microchannel: influence of the size of the excitation beam waist

Crossed-beam thermal lens spectrometry is especially designed for the detection of very small samples in capillary tubes and more generally in microfluidic devices. In this work, the effect of the size of the excitation beam with respect to the size of the sample microchannel has been investigated. Although the signal is inversely proportional to the size of the excitation waist into the sample, the use of large waists may provide greater sensitivities when short-pulse excitation lasers are used and allows easier optimization of the optical design. On the contrary, the use of small beam waists reduces the edge effects that can arise depending on the nature and thickness of the walls of the sample holder. Moreover, small beams provide better spatial resolution and have allowed the measurement of flow velocities as low as 1 mm s(-1).