Electrochemical determination of triclosan at a mercury electrode

Electrochemical sensor based on molecularly imprinted polymer for sensitive triclosan detection in wastewater and mineral water

Triclosan (TCS) is a topical antiseptic widely used in different cosmetic products. It is also a common additive in many antimicrobial household consumables. Over a certain concentration, it becomes risky for human and environmental health. This work describes the development of an electrochemical sensor based on molecularly imprinted polymer (MIP), assembled on screen-printed gold electrode (Au-SPE), dedicated to the TCS detection in environmental water sources. To achieve this goal, an acrylamide/bisacrylamide solution was polymerized after linking TCS with the carboxylic polyvinyl chloride (PVC-COOH) layer onto the Au-SPE. The sensor device fabrication and its retention capabilities were characterized through cyclic voltammetry (CV), differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM) and Fourier transform infrared (FTIR) spectroscopy. As control experiment, negligible responses were obtained during the non-imprinted polymer (NIP) test. The sensor could effectively detect TCS avoiding interferences of structural similar substances like 2,4,6-trichlorophenol and catechol. Under optimal conditions, the sensor responses were found logarithmic in the concentration range from 0.1 to 1000 pg mL^-1. Indeed, compared with reported works, this sensor exhibits lower detection limit (LOD) and quantification limit (LOQ) of 0.23 and 0.78 pg mL^-1, respectively. The developed sensor was effectively applied to wastewater samples for TCS detection and displayed satisfactory performances. Moreover, the different wastewater samples, regarding their TCS contents, were correctly classified by using principal component analysis (PCA) technique. Correspondingly, this work has demonstrated a cheap, simple and effective sensing platform for TCS detection thus making it a promising tool for future evolution of accurate and reliable environmental analysis.

Spectrophotometric determination of triclosan based on diazotization reaction: response surface optimization using Box-Behnken design

A spectrophotometric method based on diazotization of aniline with triclosan has been developed for the determination of triclosan in water samples. The diazotization process involves two steps: (1) reaction of aniline with sodium nitrite in an acidic medium to form diazonium ion and (2) reaction of diazonium ion with triclosan to form a yellowish-orange azo compound in an alkaline medium. The resulting yellowish-orange product has a maximum absorption at 352 nm which allows the determination of triclosan in aqueous solution in the linear concentration range of 0.1-3.0 μM with R² = 0.998. The concentration of hydrochloric acid, sodium nitrite, and aniline was optimized for diazotization reaction to achieve good spectrophotometric determination of triclosan. The optimization of experimental conditions for spectrophotometric determination of triclosan in terms of concentration of sodium nitrite, hydrogen chloride and aniline was also carried out by using Box-Behnken design of response surface methodology and results obtained were in agreement with the experimentally optimized values. The proposed method was then successfully applied for analyses of triclosan content in water samples.

Sensitive and selective determination of aqueous triclosan based on gold nanoparticles on polyoxometalate/reduced graphene oxide nanohybrid

A novel molecular-imprinted electrochemical sensor based on gold nanoparticles decorating polyoxometalate (H₃PW₁₂O₄₀)/reduced graphene oxide was developed for determination of trace TCS in wastewater.

Differential pulse voltammetry in analysis of disinfectants — 2-mercaptobenzothiazole, 4-chloro-3-methylphenol, triclosan, chloramine-T

The aim of this work was to study the possibility of simultaneous voltammetric determination of some disinfectants used as components in cosmetic products. The examined compounds were: triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol), chloramine-T (N-chloro-p-toluenesulfonamide sodium salt), 4-chloro-3-methylphenol and 2-mercaptobenzothiazole. Measurements were performed using glassy carbon electrode immersed in Britton-Robinson buffers which acted as supporting electrolytes. The dependence of oxidation and reduction potentials on pH was examined using cyclic voltammetry. Britton-Robinson buffer of pH 9.9 was chosen for further studies to ensure the best separation of compounds. The resultant oxidation potentials indicate the possibility to simultaneously determine some of the disinfectants.. Oxidation reactions of mixtures containing two compounds (4-chloro-3-methylphenol and chloramine-T, 2-mercaptobenzothiazole and 4-chloro-3-methylphenol, 2-mercaptobenzothiazole and triclosan) were recorded as differential pulse voltammograms.

Electrostatic accumulation and determination of triclosan in ultrathin carbon nanoparticle composite film electrodes

A film composed of carbon nanoparticles and poly(diallyldimethylammonium chloride) or CNP-PDDAC is formed in a layer-by-layer deposition process at tin-doped indium oxide (ITO) substrates. Excess positive binding sites within this film in aqueous phosphate buffer at pH 9.5 are quantified by adsorption of iron(III)phthalocyanine tetrasulfonate and indigo carmine. Both anionic redox systems bind with Langmuirian characteristics (K approximately 10(5) mol(-1) dm3) and show electrochemical reactivity throughout the film at different thicknesses. Therefore, the electrical conductivity in CNP-PDDAC films is good and the positive binding sites are approximately 140 pmol cm(-2) per layer. Structural instability of the CNP-PDDAC film in the presence of high concentrations of iron(III)phthalocyanine tetrasulfonate or indigo carmine is observed. Triclosan, a widely used anti-bacterial and anti-fungal agent, exists in aqueous media at pH 9.5 as a negatively charged chlorinated poly-aromatic phenol. Due to the negative charge, triclosan is readily accumulated into CNP-PDDAC films with an efficiency consistent with that expected for simple electrostatic interaction with the cationic binding sites. Oxidation of bound triclosan occurs at 0.6 V versus SCE in a chemically irreversible process. The CNP-PDDAC film electrode is renewed by rinsing in organic solvent and the triclosan oxidation response is shown to correlate with the triclosan concentration in solution from 0.5 to 50 microM. Applications of the CNP-PDDAC film electrode (or improved versions of it) in analysis or in anodic extraction are proposed.