Reagentless amperometric biosensors highly sensitive to hydrogen peroxide, glucose and lactose based on N-methyl phenazine methosulfate incorporated in a Nafion film as an electron transfer mediator between horseradish peroxidase and an electrode

A review on lawsone-based benzo[a]phenazin-5-ol: synthetic approaches and reactions

Phenazine systems are an important class of aza-polycyclic compounds that are easily found in nature and isolated as secondary metabolites primarily from Pseudomonas, Streptomyces, and a few other genera from soil or marine habitats. Moreover, various synthetic phenazine analogs are known for their pharmaceutical activities. Among various phenazines, benzo[a]phenazines are structural subunits in a variety of important natural products and have been given special attention due to their unique biological properties in various fields. In this review article, we highlight the synthesis of benzo[a]phenazin-5-ol derivatives from lawsone and benzene-1,2-diamines and their applications for the construction of a variety of five and six membered fused heterocycles such as pyranophenazines, spiropyranophenazines, pyridophenazines, furophenazines, benzochromenophenazines and oxazinophenazines during the period of 1995 to 2021.

Immobilized redox mediators for electrochemical NAD(P)+ regeneration

The applicability of dissolved redox mediators for NAD(P)(+) regeneration has been demonstrated several times. Nevertheless, the use of mediators in solutions for sensor applications is not a very convenient strategy since the analysis is not reagentless and long stabilization times occur. The most important drawbacks of dissolved mediators in biocatalytic applications are interferences during product purification, limited reusability of the mediators, and their cost-intensive elimination from wastewater. Therefore, the use of immobilized mediators has both economic and ecological advantages. This work critically reviews the current state-of-art of immobilized redox mediators for electrochemical NAD(P)(+) regeneration. Various surface modification techniques, such as adsorption polymerization and covalent linkage, as well as the corresponding NAD(P)(+) regeneration rates and the operational stability of the immobilized mediator films, will be discussed. By comparison with other existing regeneration systems, the technical potential and future perspectives of biocatalytic redox reactions based on electrochemically fed immobilized mediators will be assessed.

Spectrophotometric quantification of lactose in solution with a peroxidase-based enzymatic cascade reaction system

A spectrophotometric assay was developed for the quantification of lactose in aqueous solution via a one-pot enzymatic cascade reaction at 25 °C and pH 7.2. Lactose (0.2-1.8 mM), E. coli β-galactosidase (β-Gal), Aspergillus niger glucose oxidase (GOD), horseradish peroxidase (HRP) and o-phenylenediamine (OPD) were incubated, and the increase in absorbance at 417 nm (A (417)) due to the formation of DAP (2,3-diaminophenazine), the dimeric oxidation product of OPD, was followed. The increase in A (417) was found to depend linearly on the initial lactose concentration via three consecutive but simultaneously occurring enzymatic reaction steps catalyzed by β-Gal, GOD, and HRP. No pre-incubation of lactose with β-Gal is needed with this simple lactose assay.

The Sonogel–Carbon materials as basis for development of enzyme biosensors for phenols and polyphenols monitoring: A detailed comparative study of three immobilization matrixes

Three amperometric biosensors based on immobilization of tyrosinase on a new Sonogel-Carbon electrode for detection of phenols and polyphenols are described. The electrode was prepared using high energy ultrasounds (HEU) directly applied to the precursors. The first biosensor was obtained by simple adsorption of the enzyme on the Sonogel-Carbon electrode. The second and the third ones, presenting sandwich configurations, were initially prepared by adsorption of the enzyme and then modification by mean of polymeric membrane such as polyethylene glycol for the second one, and the ion-exchanger Nafion in the case of the third biosensor. The optimal enzyme loading and polymer concentration, in the second layer, were found to be 285 U and 0.5%, respectively. All biosensors showed optimal activity at the following conditions: pH 7, -200 mV, and 0.02 mol l(-1) phosphate buffer. The response of the biosensors toward five simple phenols derivatives and two polyphenols were investigated. It was found that the three developed tyrosinase Sonogel-Carbon based biosensors are in satisfactory competitiveness for phenolic compounds determination with other tyrosinase based biosensors reported in the literature. The detection limit, sensitivity, and the apparent Michaelis-Menten constant K(m)(app) for the Nafion modified biosensor were, respectively, 0.064, 0.096, and 0.03 micromol, 82.5, 63.4, and 194 nA micromol(-1)l(-1), and 67.1, 54.6, and 12.1 micromol l(-1) for catechol, phenol, and 4-chloro-3-methylphenol. Hill coefficient values (around 1 for all cases), demonstrated that the immobilization method does not affect the nature of the enzyme and confirms the biocompatibility of the Sonogel-Carbon with the bioprobe. An exploratory application to real samples such as beers, river waters and tannery wastewaters showed the ability of the developed Nafion/tyrosinase/Sonogel-Carbon biosensor to retain its stable and reproducible response.

pH-induced changes in electronic absorption and fluorescence spectra of phenazine derivatives

The visible electronic absorption and fluorescence spectra as well as fluorescence polarization degrees of imidazo-[4,5-d]-phenazine (F1), 2-methylimidazo-[4,5-d]-phenazine (F2), 2-trifluoridemethylimidazo-[4,5-d]-phenazine (F3), 1,2,3-triazole-[4,5-d]-phenazine (F4) and their glycosides, imidazo-[4,5-d]-phenazine-N1-beta-D-ribofuranoside (F1rib), 1,2,3-triazole-[4,5-d]-phenazine-N1-beta-D-glucopyranoside (F4gl), were investigated in aqueous buffered solutions over the pH range of 0-12, where the spectral transformations were found to be reversible. The effects of protonation and deprotonation on spectral properties of these dyes were studied. We have determined the ranges of pH, where individual ionic species are predominant. In aqueous buffered solutions the fluorescence was found only for neutral species of F1, F1rib, F2, and F4gl dyes, whereas for the ionic forms of these dyes, as well as for F3 and F4 ones, the fluorescence has not been detected. The concentrational deprotonation pKa values were evaluated from experimental data. It was shown that donor-acceptor properties of the substituent group in the second position of the pentagonal ring substantially affect the values of the deprotonation constants and the character of protonation for chromophore. The substitution of a hydrogen atom in the NH-group by the sugar residue blocks the formation of the anionic species, and results in enhancement of the dye emission intensity. The steep emission dependence for F1 and F1rib over pH range of 0-7 with intensities ratio of IpH 7/IpH 1=60 allows us to propose them as possible indicator dyes in luminescence based pH sensors for investigation of processes accompanied by acidification, e.g. as gastric pH-sensors. A comparative analysis of the studied dyes has shown that F4gl is the most promising compound to be used as a fluorescent probe for investigation of molecular hybridization of nucleic acids.

Bi-functionalization of a patterned Prussian blue array for amperometric measurement of glucose via two integrated detection schemes

A novel amperometric sensor that integrates two independent measurement schemes into a single chip for detection of glucose is fabricated. The sensor uses micro-patterned Prussian blue (PB) and ferrocene modified glucose oxidase covered by a thin Nafion membrane. We have developed an amperometric sensor for the detection of glucose that integrates two measurement schemes into a single chip. For fabrication of the sensing interface, micro-contact printing was used to transfer a self-assembled monolayer template onto a gold substrate, allowing selective electrochemical deposition of a PB array. The protective layer of the PB array was subsequently removed and replaced with a layer of redox-functionalized glucose oxidase (GOx), while the entire surface was finally covered with a perm-selective GOx-Nafion membrane. A variety of surface analytical techniques, including atomic force microscopy, surface plasmon resonance imaging and spectroscopic ellipsometry were employed to characterize the composite PB array electrode. The hybrid sensing interface allowed amperometric measurements of glucose to be carried out with two independent schemes at different potentials. The cathodic current was obtained with the PB array functioning as the electrocatalyst, while the anodic current was measured at a higher potential via a mediation mechanism using the ferrocene-modified GOx. For the quantitative detection of glucose, flow-injection analysis was used, and both the operating conditions and the design parameters were optimized. Linear responses were obtained for both anodic and cathodic signals over a concentration range from 0.1 to 50 mM, with a detection limit of 75 microM. The specificity of the sensor was demonstrated with respect to ascorbic and lactic acid. The implementation of integrated detection mechanisms allows the independent measurement of amperometric signals at two separate potentials. This improves the information gathering and opens up new avenues for developing novel methods that potentially eliminate false signal readings.

Evaluation of the reduction of imidazophenazine dye derivatives under fast-atom-bombardment mass-spectrometric conditions

Satellite [M + 2](+*) and [M + 3](+) peaks accompanying the common peak of the protonated molecule [M + H](+) that are known to indicate the occurrence of a reduction process were observed in the fast atom bombardment (FAB) mass spectra of imidazophenazine dye derivatives in glycerol matrix. The distribution of the abundances in the [M + nH](+) peak group varied noticeably for different derivatives. This indicated different levels of the reduction depending on the different structure variations of the studied molecules. In the search for correlations between the mass spectral pattern and the structural features of the dyes, ab initio HF/6-31++G** quantum chemical calculations were performed. They revealed that the abundances of the [M + 2](+*) and [M + 3](+) ions show growth proportional to the decrease of the energy of the lowest unoccupied molecular orbital, i.e. proportional to the increase of the electron affinity of the dye molecule. A method for rapid screening of reductive properties of sets of dye derivatives on the basis of the FAB mass spectral data is discussed.

Piezoelectric immunoassay for complement C4 based on a Nafion-modified interface for antibody immobilization

A piezoelectric immunosensor based on a Nafion membrane interface with a simple immobilization procedure has been developed for the determination of complement C4 in human serum. The polyanionic perfluorosulfonated Nafion polymer was used to modify the electrode surface of quartz-crystal microbalance (QCM) as a platform for the immobilization of complement C4 antibodies. The surface morphology of QCM modified with Nafion membrane was investigated using scanning electron microscopy. The system was optimized with regard to the parameters involved in the preparation of the immunosensor and the assay process. The proposed immunosensor responds well to C4 in the range of 0.08-1.6 microg/ml with a relative standard deviation of <5.3%. Moreover, the proposed immunosensor has advantages in terms of the speed and simplicity of the immobilization procedure as well as the simple and advantageous regeneration process. The experimental results obtained with regard to nonspecific adsorption and recovery indicate that the proposed immunosensor offers a promising alternative tool for the clinical diagnosis of complement C4.

Quantitative analysis of catalysis and inhibition at horseradish peroxidase monolayers immobilized on an electrode surface

Out of several tries, biotinylation of the electrode surface by means of a sacrificial biotinylated immunoglobulin, followed by the anchoring of an avidin-enzyme conjugate appears as the best procedure for depositing a horseradish peroxidase (HRP) monolayer onto an electrode surface, allowing a high-yield immobilization of the enzyme within a stable and highly catalytic coating. Cyclic voltammetry is an efficient means for analyzing the catalytic reduction of H(2)O(2) at such HRP monolayer electrodes in the presence of [Os(III)(bpy)(2)pyCl](2+) (with bpy = bipyridine and py = pyridine) as a one-electron reversible cosubstrate. The odd shapes of current-potential responses, unusual bell-shaped variation of the peak or plateau current with the substrate concentration, hysteresis and trace crossing phenomena, and dependence or lack of dependence with the scan rate, can all be explained and quantitatively analyzed in the framework of the same catalysis/inhibition mechanism as previously demonstrated for homogeneous systems, taking substrate and cosubstrate mass transport of into account. According to H(2)O(2) concentration, limiting-behavior analyses based on the dominant factors or complete numerical simulation were used in the treatment of experimental data. The kinetic characteristics derived from these quantitative treatments implemented by the determination of the amount of enzyme deposited by the newly developed droplet depletion method allowed a comparison with homogeneous characteristics to be drawn. It shows that HRP remains nearly fully active once anchored on the electrode surface through the avidin-biotin linkage. On the basis of this full mechanistic and kinetic characterization, the analytical performances in H(2)O(2) detection and amperometric immunosensor applications are finally discussed.

Horseradish peroxidase: a valuable tool in biotechnology

Peroxidases have conquered a prominent position in biotechnology and associated research areas (enzymology, biochemistry, medicine, genetics, physiology, histo- and cytochemistry). They are one of the most extensively studied groups of enzymes and the literature is rich in research papers dating back from the 19th century. Nevertheless, peroxidases continue to be widely studied, with more than 2000 articles already published in 2002 (according to the Institute for Scientific Information). The importance of peroxidases is emphasised by their wide distribution among living organisms and by their multiple physiological roles. They have been divided into three superfamilies according to their source and mode of action: plant peroxidases, animal peroxidases and catalases. Among all peroxidases, horseradish peroxidase (HRP) has received a special attention and will be the focus of this review. A brief description of the three super-families is included in the first section of this review. In the second section, a comprehensive description of the present state of knowledge of the structure and catalytic action of HRP is presented. The physiological role of peroxidases in higher plants is described in the third section. And finally, the fourth section addresses the applications of peroxidases, especially HRP, in the environmental and health care sectors, and in the pharmaceutical, chemical and biotechnological industries.

Real-time detection of L-ascorbic acid and hydrogen peroxide in crude food samples employing a reversed sequential differential measuring technique of the SIRE-technology based biosensor

Detection of the common electrochemical interferents, ascorbic acid and hydrogen peroxide, using a SIRE (Sensors based on Injection of the Recognition Element) technology based biosensor in reverse mode operation is reported. The differential measuring principle employed in the SIRE biosensor during operation in reverse mode is such that the sample is measured first in the presence of enzyme (yielding matrix signal only), and then measured again in the absence of enzyme (yielding signal from matrix+analyte). Subtraction of the signal obtained in the presence of enzyme from the signal obtained in the absence of enzyme gives a specific signal for the analyte only and correlates directly to its concentration in solution. The linear range for the determination of ascorbic acid and hydrogen peroxide was 0-3 mM and 0-2 mM, respectively, with an enzyme concentration of 25 U ascorbate oxidase/ml and 1000 U catalase/ml. The reproducibility was 5% for ascorbic acid (R.S.D. n=15) and 10% for hydrogen peroxide (R.S.D. n=18). The cost per measurement was 0.28 USD for ascorbic acid analysis and 0.0008 USD for hydrogen peroxide analysis. The degradation of ascorbic acid in cereal was followed in real-time, as was the stabilization of low pH on the degradation process.

An indirect perfluorosulfonated ionomer-coated electrochemical immunosensor for the detection of the protein human chorionic gonadotrophin

The development of an amperometric immunosensor for the detection of human chorionic gonadotrophin (hCG) is described. In this immunosensor, Nafion was used to immobilize an anti-hCG monoclonal antibody onto a glassy carbon electrode. A systematic study on the effects of experimental parameters such as the quantity of ethanol present in the Nafion solution, the percentage composition of Nafion, the pH of the immobilization buffer, and the concentration of antibody used for entrapment experiments on the binding between the immobilized antibody and 125I-labeled hCG has been carried out. Two immobilization methods, coimmobilization and adsorption immobilization, have then been attempted. A binding of approximately 3% was obtained in the former method, while 5.5% binding was achieved in the latter. On the basis of these results, adsorption immobilization was employed to entrap antibody on the electrode surface. A sandwich assay was then developed for hCG in which the enzyme horseradish peroxidase was conjugated to a second anti-hCG monoclonal antibody. The activity of the enzyme was determined electrochemically by the reduction of benzoquinone to hydroquinone. Binding of hCG to immobilized antibody determines the quantity of enzyme-conjugated antibody at the electrode surface, permitting the quantification of hCG. By a standard additions calibration method of hCG performed in blank human serum samples, the immunosensor exhibits a limit of linearity at 200 mIU mL-1 and a detection limit of 11.2 mIU mL-1 (based on twice the standard deviation of the blank solution).